01 borular - afielektrik.com

SECTION I
Conduits
Elektrik Tesisat Borular›
Rf,tktghjdjls
EMT, IMC, RSC, Galvanized Steel Flexible,
Liquidtight, PVC Schedule 40 & 80
GALVANIZED ELECTRICAL METALLIC TUBING (EMT) - STEEL
General
Applications
Specifications
Steel Electrical Metallic Tubing is
manufactured from mild steel tube. It
has an accurate circular cross section,
a uniform wall thickness, a defect free
interior surface, and continuously welded
seams. The exterior surface is thoroughly
and evenly coated with zinc using an
inline galvanizing process, so that metalto-metal contact and galvanic protection
against corrosion are provided.
Additionally, the exterior is protected by
a clear zinc chromate coating. The
interior surface is coated with organic
lubricating coating to reduce friction
during wire insertion and retard
corrosion.
Galvanized Steel Electrical Metallic
Tubing, National Electrical Code® (NEC®)
2008 Article 358, can be installed indoors
or outdoors, in dry or wet locations,
exposed or concealed, in all kinds of
atmospheric conditions, and in
hazardous locations, when in
accordance with the NEC® and
providing it will not be suject to severe
physical damage during and after
installation and is properly protected
against corrosion.
Also, it provides mechanical protection
for the conductors while reducing
Electro-Magnetic Field (EMF) exposure
and shielding against Electro-Magnetic
Interference (EMI).
Galvanized Steel Electrical Metallic
Tubing is manufactured in accordance
with the latest edition of the following:
American National Standards Institute American National Standard for Steel
Electrical Metallic Tubing (EMT) ANSI®
C80.3
Underwriters Laboratories Standard for
Electrical Metallic Tubing - Steel, UL
797.
National Electrical Code® 2008 - Article
358.
Federal Specification - WW-C-563
EMT and its associated tubular fittings
are produced in nominal trade sizes from
1/2 to 4. EMT is produced in standard
lengths of 10 feet (3.05 m).
The above Federal specification may still
be referenced, however the federal
government has canceled it and adopted
the UL 797 and ANSI C80.3 standard
and will no longer maintain a separate
Electrical Metallic Tubing was covered
under WW-C-563.
Bundles of finished EMT are wrapped
with color coded special light weight
filament tape. Black tape identifies trade
sizes 1/2 and 1 1/2, Red tape identifies
3/4 and 1 1/4, and Blue tape 1. Trade
sizes 2 and larger are not bundled.
EMT is a UL Listed product. Each length
of tubing has a label affixed containing
UL Listing information and a bar code.
Each length is identified with name,
Logo, the letters “EMT” clearly and
durably marked once per 10 feet (3.05
m) length, a U.L. listing nmber and the
words, “Consult manufacturer for
installation instructions”. On July 25,
2001 the past UL requirement to embed
the letters “EMT” into the surface of the
tube was changed to require only durably
marking the tube with the letters “EMT”
at a minimum of 1/8 inch (3 mm) high.
Trade
Size
Metric
Designator
Galvanized Steel Electrical Metallic
Tubing is an approved equipment
grounding conductor under the 2008
NEC® Section 250.118(4). The NEC®
establishes the minimum requirements
for a safe electrical installation. Because
of the varied environments in which
electrical equipment is installed, local
amendments are often added. Always
APPROVED BRANDS :
E48675
consult local codes prior to any
installation.
WEIGHTS AND DIMENSIONS
Weight
10 Unit Lengths
lb
Additional information on the titles and
designations of standards or
requirements that have been used for
the investigation of products in a specific
category can be found in the
Underwriters Laboratories Inc.®, General
Information for Electrical Equipment
Directory. The UL product category for
EMT is FJMX.
kg
Outside
Diameter (1)
in.
mm
E302246
Wheatland
Inside
Diameter (2)
in.
mm
Wall
Thickness (2)
in.
16
15.80
.042
30
13.6
0.706
17.93
0.622
21
.049
20.9
0.922
23.42
0.824
20.93
46
1”
27
1.163
29.54
1.049
26.64
.057
67
30.4
1 1/4”
35
101
45.8
1.510
38.35
1.380
35.05
.065
1 1/2”
41
44.20
1.610
40.89
.065
116
52.6
1.740
53
2.067
52.50
.065
148
67.1
2.197
55.80
2”
63
98.0
2.875
73.03
2.731
69.37
.072
216
2 1/2”
78
3”
85.24
.072
263
119.3
3.500
88.90
3.356
3 1/2”
91
.083
4.000
101.60
3.834
97.38
349
158.3
4”
103
114.30
4.334
110.08 .083
393
178.3
4.500
Notes : Applicable tolerances
Length : 10 Ft. (3.05 m) +/- 1/4 in. (+/- 6.35 mm)
(1) Outside Diameter : 1/2 - 2 +/- 0.005 in. (16-53 +/- 0.13 mm) 2-1/2 +/- 0.010 in. (63 +/- 0.25 mm)
3 +/- 0.015 in. (78 +/- 0.38 mm), 3-1/2 - 4 +/- 0.020 in. (91 - 103 +/- 0.51 mm).
(2) For information only, not a UL 797 requirement.
1/2”
3/4”
A 01
www.afielektrik.com
mm
1.07
1.25
1.45
1.65
1.65
1.65
1.83
1.83
2.11
2.11
D‹fiS‹Z EMT GALVAN‹ZL‹ ÇEL‹K BORULAR
Genel kullan›m amaçl›, Amerikan U.L. onayl›, NEC flartnamesine uygun elektrik tesisat borular›d›r. Özel alafl›ml› yüksek
kaliteli çelikten imal edilmifl ve s›cak dald›rma yöntemiyle galvanizlenmifltir. Borular›n standart uzunluklar› 10 ft (3.05
m)’ dir. Borular diflsiz oldu¤u için montaj süratle gerçeklefltirilir. De¤iflik aksesuarlar ve bükme aparatlar›yla flantiyede
montaj esnas›nda elle bükme yap›labilir. Manflon, rakor ve di¤er fittingleri kullanmak için özel bir alet gerekmez.
Borular›n içi imalat esnas›nda temizlenip kaygan bir madde ile kaplanm›flt›r. Kablolar kolayca ve izolasyona zarar
vermeden çekilir.
Diflsiz EMT borular kablolar› sadece mekanik zarara karfl› korumakla kalmaz ayn› zamanda linyelerin elektromanyetik
korumas› da yapar. Aleve ve dumana karfl› içten ve d›fltan koruma sa¤layan en güvenli tesisat sistemidir. Diflsiz EMT
çelik boru sistemi konutlarda, ifl ve al›flverifl merkezlerinde, otellerde, kamu binalar›nda, hastanelerde, okullarda ve
benzeri yap›larda güvenle kullan›lmaktad›r.
Referans projelerimizden baz›lar› : ‹fl Bankas› Üç Kuleler, Garanti Bankas› Genel Müdürlük Binas›, Tekfen Tower ve
Eczac›bafl› Kanyon Projesi.
APPROVED BRANDS :
E48675
E302246
Wheatland
ÜRÜN
KODU
EMT-050
EMT-075
EMT-100
EMT-125
EMT-150
EMT-200
EMT-250
EMT-300
EMT-350
EMT-400
ÖLÇÜ
U.S / Metrik
A⁄IRLIK
Adet / Kg.
NOM‹NAL
DIfi ÇAP MM.
1/2”
1.36 kg
2.09 kg
3.04 kg
4.58 kg
5.26 kg
6.71 kg
9.80 kg
11.93 kg
15.83 kg
17.82 kg
17.93 mm
23.42 mm
29.54 mm
38.35 mm
44.20 mm
55.80 mm
73.03 mm
88.90 mm
101.60 mm
114.30 mm
16 mm
21 mm
1” 27 mm
11/4” 35 mm
11/2” 41 mm
2” 53 mm
21/2” 63 mm
3” 78 mm
31/2” 91 mm
4” 103 mm
3/4”
NOM‹NAL ET
KALINLI⁄I MM.
STANDART
BA⁄
ADED‹
1.07 mm
1.25 mm
1.45 mm
1.65 mm
1.65 mm
1.65 mm
1.83 mm
1.83 mm
2.11 mm
2.11 mm
10 Adet
10 Adet
5 Adet
5 Adet
1 Adet
1 Adet
1 Adet
1 Adet
1 Adet
1 Adet
A 02
www.afielektrik.com
INTERMEDIATE METAL CONDUIT (IMC) - STEEL
General
Steel Intermediate Metal Conduit is
manufactured from a mild steel tube. It
has an accurate circular cross section,
a uniform wall thickness, a defect free
interior surface, and a continuous welded
seam. To protect from corrosion the
exterior surface is thoroughly and evenly
coated with metallic zinc applied directly
to the surface of the steel so that metalto-metal contact and galvanic protection
against corrosion are provided. The
interior surface is protected by an organic
corrosion-resistant coating to which an
additional lubricating coating is applied
to reduce friction during wire insertion.
Specifications
Applications
Galvanized Intermediate Metal Conduit,
National Electrical Code® (NEC®) 2008
Article 342, can be installed indoors or
outdoors, in dry or wet locations,
exposed or concealed, in all kinds of
atmospheric conditions, and in
hazardous locations, when in
accordance with the NEC® 501.4, 502.4,
503.3, and 504.20. Also, it provides
excellent mechanical protection for the
conductors while reducing ElectroMagnetic Field (EMF) exposure and
shielding against Electro-Magnetic
Interference (EMI).
Galvanized Intermediate Metal Conduit
is manufactured in accordance with the
latest edition of the following:
American National Standards Institute American National Standard for Electrical
Intermediate Metal Conduit (EIMC)
ANSI® C80.6
Underwriters Laboatories Standard for
Electrical Intermediate Metal Conduit
Steel, UL 1242.
National Electrical Code® 2008 - Article
342.
IMC and its associated tubular fittings
are produced in nominal trade sizes from
1/2 to 4. IMC produced in standard
lengths of 10 feet (3.05 m), including
coupling, is threaded on both ends, with
a coupling applied to one end. A by size
color-coded thread protector is applied
to the other end, to aid in trade size
identification.
Federal Specification - WW-C-581
Yellow thread protectors represent trade
sizes 1/2, 1-1/2, 2-1/2, 3-1/2, Green 3/4
and 1-1/4 trade sizes, and Orange full
trade sizes 1, 2, 3, and 4.
Additional Infonmation on the titles and
designations of standards or
requirements that have been used for
the investigation of products in a specific
category can be found in the
Underwriters Laboratories Inc., General
Information for Electrical Equipment
Directory. The UL product category for
Intermediate Ferrous Metal Conduit is
DYBY.
The finished threads, National Pipe Taper
(NPT), conforms to the American
National Standard for Pipe Threads,
General Purpose (Inch), ANSI/ASME
B1.20.1. The taper of threads is 3/4 inch
per foot (1 in 16). Threads are treated
with a protective coating to prevent
corrosion before installation.
Each length of conduit has a label affixed
which contains the UL Listing and a bar
code. Each length is identified with
Wheatland’s name, Logo, the product
name “Intermediate Metal Conduit or
IMC”, a U.L. listing number and the
words, “Consult manufacturer for
installation instructions”.
The above Federal specification may still
be referenced, however the federal
government has canceled it and adopted
the UL 1242 standard and will no longer
maintain a seperate standard.
Intermediate Metal Conduit was covered
under WW-C-581, Class 2, Tpe A.
Galvanized Ihtermediate Metal Conduit
is an approved equipment grounding
conductor, the 2008 NEC ® Article
250.118(3). The NEC® establishes the
minumum requirements for a safe
electrical installation. Because of the
varied environments in which electrical
equipment is installed, local amendments
are often added. Always consult
1/2”
3/4”
1”
11/4”
11/2”
2”
21/2”
31/2”
4”
41/2”
16
21
27
35
41
53
63
78
91
103
14
14
11
11 1/2
11 1/2
11 1/2
8
8
8
8
ft.
9
9
9
9
9
9
9
9
9
9
E304140
Wheatland
WEIGHTS AND DIMENSIONS
(+/-/in.) (+/- 6 mm)
in.
mm
11 1/4
11 1/4
11
11
11
11
10 1/2
10 1/2
10 1/4
10 1/4
E58868
local codes prior to any
installation.
Weight
Trade
Metric Threads Acceptable Length of Finished 10 Unit Lengths
Size Designator
Per
Counduit without Coupling with Couplings
Inch
APPROVED BRANDS :
3030
3030
3025
3025
3025
3025
3010
3010
3005
3005
lb
kg
30
46
67
101
116
148
216
263
349
393
13.6
20.9
30.4
45.8
52.6
67.1
98.0
119.3
158.3
178.3
Outside
Diameter (1)
in.
mm
0.815 20.70
1.029 26.26
1.290 32.77
1.638 41.59
1.883 47.82
2.360 59.93
2.857 72.57
3.476 88.29
3.971 100.86
4.466 113.44
Inside
Diameter (2)
Wall
Thickness (2)
in.
mm
in.
mm
0.660
0.869
1.105
1.448
1.683
2.150
2.557
3.176
3.671
4.166
16.76
22.07
28.07
36.77
42.74
54.60
64.95
80.67
93.24
105.82
.078
.083
.093
.095
.100
.105
.150
.150
.150
.150
1.97
2.10
2.35
2.41
2.54
2.67
3.81
3.81
3.81
3.81
Notes : (1) Figures are the average of the maximum and minimum dimensions as given in UL 1242.
(2) Calculated from nominal outside diameter and nominal wall thickness.
Steel Intermediate Metal Conduit is manufactured to the lengths shown above, so when a straight-tapped coupling
is attached a 10 foot (3.05 m) lenght is produced.
A 03
www.afielektrik.com
GALVANIZED RIGID METAL CONDUIT (RSC) - STEEL
General
Rigid Steel Conduit is manfactured from
mild steel tube. It has an accurate circular
cross section, a uniform wall thickness,
a defect free interior surface, and a
continuous welded seam. The interior
and exterior surfaces are throughly and
evenly coated with zinc using the hotdip galvanizing process, so that metalto-metal contact and galvanic protection
against corrosion are provided. A clear
coating of zinc chromate is also applied.
Additional lubricating coating may be
applied to the interior surface to reduce
friction during wire insertion.
Applications
Specifications
Galvanized Rigid Steel Conduit can be
installed indoors or outdoors, in dry or
wet locations, exposed or concealed, in
all kinds of atmospheric conditions, and
in hazardous locations when in
accordance with the NEC® Article 344.
Also, it provides excellent mechanical
protection for the conductors while
reducing Electro-Magnetic Field (EMF)
exposure and shielding against ElectroMagnetic Interference (EMI).
Wheatland Galvanized Rigid Steel
Conduit is manufactured in accordance
with the latest edition of the following:
Trade Sizes 2 through 6 ade UL Listed
for use with directional boring equipment.
National Electrical Code
344.
American National Standards Institute American National Standard for Electrical
Rigid Steel Conduit (ERSC) ANSI® C80.1
Underwriters Laboatories Standard for
Electrical Rigid Steel Conduit - Steel,
UL 6.
RSC and its associated tubular fittings
are produced in nominal trade sizes from
1/2 to 6. RSC produced in standard
lengths of 10 feet (3.05 m), including
coupling, is threaded on both ends, with
a coupling applied to one end a by size
color-coded thread protector to the
other.
Federal Specification - WW-C-581
The above Federal specification may still
be referenced, however the federal
government has canceled it and adopted
the UL 6 standard and will no longer
maintain a seperate standard. Rigid Steel
Conduit was covered under
WW-C-581, Class 1, Tpe A.
Black thread protectors identify trade
sizes 1/2, 1-1/2, 2-1/2, 3-1/2. Red 3/4
and 1-1/4. Blue thread protectors identify
trade sizes 1, 2, 3,4,5, and 6.
The pitch of threads conforms to the
American National Standard for Pipe
Threads, General Purpose (Inch),
ANSI/ASME B1.20.1. The taper of
threads is 3/4 inch per foot (1 in 16).
Threads are protected after cutting by
an application of molten zinc.
Each length of conduit has a label affixed
which contains the UL Listing and a bar
code. Each length is identified with the
words “Rigid Steel Conduit”, a U.L. listing
number and the words, “Consult
manufacturer for installation
instructions”.
Metric
Trade
Size Designator
Threads
Per
Inch
1/2”
3/4”
16
21
27
35
41
53
63
78
91
103
129
155
14
14
11 1/2
11 1/2
11 1/2
11 1/2
8
8
8
8
8
8
9
9
9
9
9
9
9
9
9
9
9
9
Additional Infonmation on the titles and
designations of standards or
requirements that have been used for
the investigation of products in a specific
category can be found in the
Underwriters Laboratories Inc.®, General
Information for Electrical Equipment
Directory. The UL product category for
Rigid Ferrous Steel Conduit is DYIX.
Galvanized Rigid Steel Conduit is an
approved equipment grounding
conductor, 2008 NEC® Article
250.118(2). The NEC® establishes the
minumum requirements for a safe
electrical installation. Because of the
varied environments in which electrical
equipment is installed, local amendments
are often added. Always consult local
codes prior to any installation.
APPROVED BRANDS :
E22335
(+/-1/4n.) (+/- 6 mm)
mm
in.
111/4
111/4
11
11
11
11
10 1/2
10 1/2
10 1/4
10 1/4
10
10
3030
3030
3025
3025
3025
3025
3010
3010
3005
3005
2995
2995
Weight
10 Unit Lengths
with Couplings
E307674
Wheatland
WEIGHTS AND DIMENSIONS
Acceptable Length of Finished
Counduit without Coupling
ft.
2008 - Article
Nominal
Outside
Diameter*
Nominal
Inside
Diameter*
Nominal
Wall
Thickness*
lb
kg
in.
mm
in.
mm
in.
mm.
82
109
161
218
863
350
559
727
880
1030
1400
1840
37.20
49.44
73.03
98.88
119.30
158.76
253.56
329.77
399.17
467.21
635.04
834.62
0.840
1.050
1.315
1.660
1.900
2.375
2.875
3.500
4.000
4.500
5.563
6.625
21.34
26.67
33.40
42.16
48.26
60.33
73.03
88.90
101.60
114.30
141.30
168.28
0.632
0.836
1.063
1.394
1.624
2.083
2.489
3.090
3.570
4.050
5.073
6.093
16.05
21.23
27.00
35.41
41.25
52.91
63.22
78.49
90.68
102.87
128.85
154.76
.104
.107
.126
.133
.138
.146
.193
.205
.215
.225
.245
.266
2.64
2.72
3.20
3.38
3.51
3.71
4.90
5.21
5.46
5.72
6.22
6.76
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
3 1/2”
4”
5”
6”
* For information only, not a UL 6 requirement.
Rigid Steel Conduit is manufactured to the lengths, shown above, so when a straight-tapped coupling is attached
a 10 foot (3.05 m) length is produced. Wheatland trade sizes 3 through 6 are UL Listed for use with directional boring
equipment.
A 04
www.afielektrik.com
D‹fiL‹ IMC/RSC GALVAN‹ZL‹ ÇEL‹K BORULAR
Diflli IMC / RSC Galvanizli Çelik borular özellikle patlama tehlikesinin bulundu¤u a¤›r hizmet tipi ortamlarda kullan›lan,
Amerikan U.L. onayl› ve NEC flartnamesine uygun elektrik tesisat borular›d›r. Özel alafl›ml›, yüksek kaliteli çelikten imal
edilmifl ve s›cak dald›rma yöntemiyle galvanizlenmifltir. Yüksek et kal›nl›¤› ve konik difl sistemi sayesinde alevs›zd›rmazl›k
özelli¤ine sahip olan bu borular çok yüksek mekanik dirence karfl› koyabilir. Borular›n içi imalat esnas›nda temizlendi¤i
için kablolar kolayca ve izolasyona zarar vermeden çekilir. Diflli IMC / RSC Borular kablolar› sadece mekanik zarara
karfl› korumakla kalmaz, ayn› zamanda linyelerin elektromanyetik korumas›n› da yapar: Boru çap›na uygun bükme
aparatlar›yla flantiyede montaj esnas›nda elle bükme yap›labilir. Uygun muf, rakor, tespit kroflesi ve di¤er tüm ba¤lant›
elemanlar› stoklar›m›zda mevcut olan Diflli IMC / RSC Çelik borular, bir ucunda muf di¤er ucunda difl koruyucu plastik
ile teslim edilmektedir.
Diflli IMC Çelik Borular rafineriler, petrokimya tesisleri, boru hatlar› dolum ve pompa istasyonlar›, askeri üsler ve
cephanelikler, havaalanlar›, a¤›r sanayi tesisleri ve benzeri patlama tehlikesi içeren yerlerde güvenle kullan›lmaktad›r.
Referans projelerimizden baz›lar›: Bakü-Tiflis-Ceyhan Boru Hatt›, Tüprafl, Tedafl, Band›rma Gübre Fabrikas›.
APPROVED BRANDS :
E22335
E307674
Wheatland
ÜRÜN
KODU
IMC-050
IMC-075
IMC-100
IMC-125
IMC-150
IMC-200
IMC-250
IMC-300
IMC-350
IMC-400
RSC-500
RSC-600
ÖLÇÜ
U.S / Metrik
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
3 1/2”
4”
5”
6”
16 mm
21 mm
27 mm
35 mm
41 mm
53 mm
63 mm
78 mm
91 mm
103 mm
129 mm
155 mm
A⁄IRLIK
Adet / Kg.
NOM‹NAL
DIfi ÇAP MM.
NOM‹NAL ET
KALINLI⁄I MM.
2.81 kg
3.81 kg
5.40 kg
7.17 kg
8.80 kg
11.61 kg
20.00 kg
24.63 kg
28.53 kg
31.75 kg
63.49 kg
83.45 kg
20.70 mm
26.10 mm
32.80 mm
41.60 mm
47.80 mm
59.90 mm
72.60 mm
88.30 mm
100.90 mm
113.40 mm
141.30 mm
168.30 mm
1.80 mm
1.90 mm
2.20 mm
2.20 mm
2.30 mm
2.40 mm
3.50 mm
3.50 mm
3.50 mm
3.50 mm
6.20 mm
6.80 mm
A 05
www.afielektrik.com
STANDART
BA⁄
ADED‹
10 Adet
5 Adet
5 Adet
1 Adet
1 Adet
1 Adet
1 Adet
1 Adet
1 Adet
1 Adet
1 Adet
1 Adet
GALVANIZED FLEXIBLE STEEL CONDUITS /
GALVAN‹Z KAPLI ÇEL‹K SP‹RAL BORULAR
GALVANIZED FLEXIBLE STEEL CONDUIT /
GALVAN‹Z KAPLI ÇEL‹K SP‹RAL BORU
Arrowtite
®
Galvanizli Çelik Spiral Borular bükülme özelli¤ine sahip, Amerikan U.L onayl›, NEC flartnamesine uygun elektrik tesisat borular›d›r. Özel alafl›ml›
yüksek kaliteli çelikten imal edilmifl ve s›cak dald›rma yöntemi ile galvanizlenmifltir.
Diflsiz EMT Boru sistemi ile kullan›lan Çelik Spiral Borular asma tavan alt› armatür montaj› ve bükülme özelli¤inin gerekli görüldü¤ü dahili
uygulamalarda tercih edilmektedir.
ÜRÜN
KODU
5501-22-00
5501-24-00
5501-30-00
5501-42-00
5501-45-00
5501-60-00
5502-22-00
5502-24-00
5502-30-00
5502-45-00
5502-60-00
5503-22-00
5503-24-00
5503-30-00
5503-45-00
5503-60-00
5504-24-00
5504-80-00
5505-24-00
5505-40-00
5506-22-00
5507-22-00
5508-22-00
5509-22-00
5510-22-00
5511-22-00
ÖLÇÜ
RULO MAKARA ORTALAMA
A⁄IRLIK/
inches Metrik B‹R‹M‹ B‹R‹M‹
100feet
(feet)
(feet)
(pounds)
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
1/2”
1/2”
1/2”
1/2”
1/2”
3/4”
3/4”
3/4”
3/4”
3/4”
1”
1”
1 1/4”
1 1/4”
1 1/2”
2”
2 1/2”
3”
3 1/2”
4”
12
12
12
12
12
12
16
16
16
16
16
21
21
21
21
21
27
27
35
35
41
53
63
78
91
103
25’
50’
100’
250’
25’
50’
100’
25’
50’
100’
50’
50’
25’
25’
25’
25’
25’
25’
500’
1000’
500’
1000’
500’
1000’
300’
200’
-
17
17
17
17
17
17
27
27
27
27
27
35
35
35
35
35
51
51
63
63
76
100
165
197
230
263
BORU DIfi
ÇAPI
(min / max)
0.375/0.393
0.375/0.393
0.375/0.393
0.375/0.393
0.375/0.393
0.375/0.393
0.625/0.645
0.625/0.645
0.625/0.645
0.625/0.645
0.625/0.645
0.812/0.835
0.812/0.835
0.812/0.835
0.812/0.835
0.812/0.835
1.000/1.040
1.000/1.040
1.250/1.300
1.250/1.300
1.500/1.575
2.000/2.080
2.500/ 3.000/ 3.500/ 4.000/ -
BORU ‹Ç TAM BÜKÜLÜ
ÇAPI
D‹RSEK ÇAPI
(min / max)
inches
0.560/0.610
0.560/0.610
0.560/0.610
0.560/0.610
0.560/0.610
0.560/0.610
0.860/0.920
0.860/0.920
0.860/0.920
0.860/0.920
0.860/0.920
1.045/1.105
1.045/1.105
1.045/1.105
1.045/1.105
1.045/1.105
1.300/1.380
1.300/1.380
1.550/1.630
1.550/1.630
1.850/1.950
2.350/2.450
2.860/3.060
3.360/3.560
3.860/4.060
4.360/4.560
2
2
2
2
2
2
3
3
3
3
3
4
4
4
4
4
5
5
6.25
6.25
7.50
10
12.50
15
17.50
20
Applications
• Flexible metal raceway for electrical
power, control and communication
cables
• Motor leads
• Listed assemblies
• Listed wire fixtures
• Manufactured wiring systems
Description
• Reduced Wall Flexible Steel
Conduit
• High grade hot dipped zinc
galvanized low carbon steel
• Interlocking design
• Corrosion resistant
References & Ratings
• UL 1, UL 1479, File Reference
E11831, CSA File Number 15035,
CSA C22.2 No. 56 (trade size 3/8
only)
• NEC® 250.118(6), 300.22(C),
348 430.123, 501.4(B)(2), 645.5
• Federal Specification WW-C566C,
(now supeseded by UL 1)
• Cable Tray installations per NEC®
• Environmental Air-Handling space
installation NEC® 320.22(C)
• UL Classified 1, 2 and 3 - hour
Through-Penetration Fire Systems
UL File R14141
GALVANIZED EXTRA FLEXIBLE STEEL CONDUIT /
GALVAN‹Z KAPLI ÇEL‹K EXTRA FLEXIBLE SP‹RAL BORU
Arrowtite
®
Galvanizli Çelik Spiral Borular bükülme özelli¤ine sahip,elektrik tesisat borular›d›r. Özel alafl›ml› yüksek kaliteli çelikten imal edilmifl ve s›cak
dald›rma yöntemi ile galvanizlenmifltir. Diflsiz EMT Boru sistemi ile kullan›lan Çelik Spiral Borular asma tavan alt› armatür montaj› ve bükülme
özelli¤inin gerekli görüldü¤ü dahili uygulamalarda tercih edilmektedir.
ÖLÇÜ
inches
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
4”
RULO
B‹R‹M‹
(metre)
50
50
30
15
15
15
10
10
10
BORU DIfi
ÇAPI
(min / max)
15.00/15.80
21.50/22.50
28.00/28.80
36.60/38.00
41.60/43.00
55.20/56.20
69.40/ 70.80
82.50/ 83.80
108.00/ 109.10
BORU ‹Ç
ÇAPI
(min / max)
12.20/12.80
18.60/19.50
24.60/25.60
31.50/32.30
37.80/38.50
49.80/50.60
62.50/63.50
75.50/76.50
101.50/102.50
Description
•
•
•
•
Non-UL Extra Flexible Steel Conduit
High grade galvanized low carbon steel
Interlocking design
Corrosion resistant
UKAS
TIS.770-2533
ISO 9000
Applications
• Flexible metal raceway for electrical power,
control and communication cables
• Motor leads
The data above data might be changed without prior notice. Spacial sizes are avaible on request
Tablodaki bilgiler önceden haber verilmeden de¤ifltirilebilir. Talep edilmesi halinde özel ebatlarda
imal edilebilir.
A 06
www.afielektrik.com
TYPE LFMC - LIQUIDTIGHT FLEXIBLE STEEL CONDUIT /
SIVI SIZDIRMAZ PVC KAPLI ÇEL‹K SP‹RAL BORU
Arrowtite
®
vinyl sheath
copper
galv.steel strip
UL E222318
vinyl sheath
galv.steel strip
1 1/2” - 4” inter locked
1/2” - 1 1/4” squard locked
S›v› Geçirmez PVC Kapl› ‹çi Galvanizli Çelik Spiral Borular; s›v› s›zd›rmazl›k özelli¤ine ihtiyaç duyulan tüm koflullarda kullan›lan, Amerikan U.L
onayl›, NEC flartnamesine uygun elektrik tesisat borular›d›r. IP 67 kategorisindeki PVC Kapl› Çelik Spiral Borular s›v›, ya¤ ve di¤er kimyasallar›n
bulundu¤u motor ba¤lant›lar› klima kompresör ba¤lant›lar› ve benzeri dahili ve harici uygulamalarda güvenle kullan›l›r. Yüksek ›s›ya dayan›kl› veya
yanmaz PVC Kapl› Çelik Spiral Borular ihtiyaç üzerine taraf›m›zdan temin edilmektedir.
ÜRÜN
KODU
ÖLÇÜ
RULO MAKARA
inches Metrik B‹R‹M‹ B‹R‹M‹
(feet)
(feet)
6201-30-BK
6202-30-BK
6202-45-BK
6202-60-BK
6203-30-BK
6203-45-BK
6203-60-BK
6204-30-BK
6204-80-BK
6205-24-BK
6205-40-BK
6206-24-BK
6206-35-BK
6207-30-BK
3/8”
1/2”
1/2”
1/2”
3/4”
3/4”
3/4”
1”
1”
1 1/4”
1 1/4”
1 1/2”
1 1/2”
2”
12
16
16
16
21
21
21
27
27
35
35
41
41
53
100’
100’
100’
100’
50’
50
-
500’
1000’
500’
1000’
300’
200’
150’
100’
ORTALAMA BORU DIfi
A⁄IRLIK/
ÇAPI
100feet
(pounds) (min / max)
24
31
31
31
49
49
49
79
79
103
103
109
109
146
0.594/0.614
0.732/0.765
0.732/0.765
0.732/0.765
0.930/0.960
0.930/0.960
0.930/0.960
1.201/1.226
1.201/1.226
1.540/1.570
1.540/1.570
1.735/1.770
1.735/1.770
2.180/2.215
PVC KAPLI
BORU DIfi ÇAPI
(min / max)
0.690/0.710
0.820/0.840
0.820/0.840
0.820/0.840
1.030/1.050
1.030/1.050
1.030/1.050
1.290/1.315
1.290/1.315
1.630/1.660
1.630/1.660
1.865/1.900
1.865/1.900
2.340/2.375
BORU ‹Ç TAM BÜKÜLÜ
ÇAPI
D‹RSEK ÇAPI
(min / max)
inches
0.484/0.504
0.622/0.642
0.622/0.642
0.622/0.642
0.820/0.840
0.820/0.840
0.820/0.840
1.041/1.066
1.041/1.066
1.380/1.410
1.380/1.410
1.575/1.600
1.575/1.600
2.020/2.045
2
3.25
3.25
3.25
4.25
4.25
4.25
6.5
6.5
8
8
9
9
11.12
Description
Applications
References & Ratings
• UL bonded strip 3/8” - 1 1/4”
• UL Liquidtight all sizes
• Sunlight resistant
• Flame retardant PVC jacket
• Hot dipped zinc galvanized low carbon steel core
• Available in black, grey, orange red an yellow
• 600 volt and lower circuits
• Direct burial in earth
• Concrete embedment
• Suitable for grounding per NEC® 250.118(7)
• Raised computer room floors per NEC® 501
• Hazardous location per NEC® 645.5(D)
• Service entrance wiring up to 6 feet per
NEC® 230.43(15)
• Feeders and services for marina and boat yards
• UL 360, File Reference E26540, CSA Certified File
LL51593, CSA C22.2 Number 56
• NEC® 250.118(7), 350 390.15, 501.4(B)(2),
502.4(A)(1)(e), 503.3(A)(2), 511.7(A)(1), 645.5(D)(2),
680.21, 680.21, 680.42, 695.6(E),695.14(E)
• Canadian Electrical Code (CEC) Part I Clause
12-1300
• UL approved for use in direct burial applications
including concrete and earth burial (Sizes 3/8”
throught4”)
• Conduit in sizes 1 1/2” and larger requires grouning
conductor per NEC® 250.118(7)
• May be instlled under raised computer room floors
per NEC® 645.5(D)
Temperature Rating
• 80ºC to -30ºC Dry
• 60ºC Wet
• 70ºC Oil resistant
TYPE LFMC - VF LIQUIDTIGHT FLEXIBLE STEEL CONDUIT /
SIVI SIZDIRMAZ PVC KAPLI ÇEL‹K SP‹RAL BORU
Arrowtite
®
vinyl sheath
galv.steel strip
S›v› Geçirmez PVC Kapl› ‹çi Galvanizli Çelik Spiral Borular; s›v› s›zd›rmazl›k özelli¤ine ihtiyaç duyulan tüm koflullarda kullan›lan elektrik tesisat
borular›d›r. IP 67 kategorisindeki PVC Kapl› Çelik Spiral Borular s›v›, ya¤ ve di¤er kimyasallar›n bulundu¤u motor ba¤lant›lar› klima kompresör
ba¤lant›lar› ve benzeri dahili ve harici uygulamalarda güvenle kullan›l›r. Yüksek ›s›ya dayan›kl› veya yanmaz PVC Kapl› Çelik Spiral Borular ihtiyaç
üzerine taraf›m›zdan temin edilmektedir.
Description
lenght
ÖLÇÜ
inches
RULO
UZUNLU⁄U
(metre)
without coupling BORU DIfi
ÇAPI
min. max.
(min / max)
mm
mm
1/2”
60
50
30
15
15
15
10
10
10
1.00 1.35
20.80/21.30
1.10 1.55
26.20/26.70
1.70 1.95
32.70/33.40
1.25 1.70
41.50/42.20
1.80 2.30
47.40/48.30
2.40 2.80
59.40/60.30
2.00 2.50
72.10/73.00
2.50 3.20
87.70/88.90
2.80 3.03 113.20/114.30
3/4”
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
4”
BORU ‹Ç
ÇAPI
(min / max)
MIN. DÖNÜfi ÇAPI • General wiring application
(mm)
• Mechanical and moisture protection forconductors
• Sunlight resistant
• Flame retardant PVC jacket
15.70/16.30
70
• Hot dipped zinc galvanized low carbon steel core
20.70/21.30
100
• Very flexible
26.20/26.90
150
35.10/35.70
40.20/40.80
51.00/51.80
62.50/64.00
77.60/78.80
101.10/102.50
180
250
430
550
800
1200
The data above data might be changed without prior notice. Spacial sizes are avaible on request
Tablodaki bilgiler önceden haber verilmeden de¤ifltirilebilir. Talep edilmesi halinde özel ebatlarda imal edilebilir.
A 07
www.afielektrik.com
Applications
• 600 volt and lower circuits
• Industrial and machine tool applications
• Vibration and movement absorbing
Temperature Rating
• 60ºC to -20ºC Dry
• 60ºC Wet
• 60ºC Oil resistant
SCHEDULE 40 & 80 RIGID PVC CONDUIT AND SWEEPS
National Pipe & Plastics Schedule 40 & 80 Heavy Wall PVC Conduit is manufactured in accordance with UL 651,
ANSI/NEMA TC-2, and meets the requirements Federal Military Specification WC-1094A and Article 352 of the
National Electrical Code.
Uses include aboveground, exposed, underground and concrete encasement applications. National Pipe and Plastics
conduit is 90° wire rated and sunlight resistant. All sizes come in both 10’ and 20’ lengths with an integral bell on
one end.
Bu PVC boru tipi harici ortamlarda hem yer üstü ve yer alt›nda hemde beton içine gömülü kullan›m için NEC
taraf›ndan uygun bulunmufltur. Günefl ›fl›¤›ndan bir çok kimyasal maddeden ve korozif ortamlardan etkilenmez.
Tamamen yal›tkan olup, iletkenlerde güç kayb› yada ›s›nmaya neden olmaz. Yang›na dayan›kl› olup mekanik
korumada da yüksek direnç gösterirler. 90˚ C yal›t›ml› iletkenlerin kullan›m›na uygundurlar.
NOM.
SIZE
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
3 1/2”
4”
5”
6”
METRIC
DES.
16
21
27
35
41
53
63
78
91
103
129
155
AVG.
O.D.
.840
1.050
1.315
1.660
1.900
2.375
2.875
3.500
4.000
4.500
5.563
6.625
MIN. WALL
SCH 40 SCH 80
.109
.113
.133
.140
.145
.154
.203
.216
.226
.237
.258
.280
• U.L. Listed
• Sunlight resistant
• Rated for use with 90° C conductors
• CSA Listed, C22.2 No 211.2 **
MIN.
Wt. Per 100 Feet Feet Per
SCH 40 SCH 80 Bundle Socket Depth
.147
.154
.179
.191
.200
.218
.276
.300
N/A
.337
.375
.432
17
23
33
45
53
71
112
147
177
209
283
367
21
29
42
58
70
97
148
198
N/A
289
403
563
6000
4400
3600
3300
2250
1400
930
880
630
570
380
260
2.000
2.000
2.500
3.000
3.000
3.500
3.500
4.000
3.500
4.750
4.000
5.000
* Rigid non-metallic conduit is normally supplied
in standard 10’ lengths with one belled end
per length. For specific requirements, it may be
produced in lengths shorter or longer than
10’, with or without a bell.
** CSA Certification applies only to conduit
manufactured in New York.
ELBOWS
National Pipe & Plastics Schedule 40 & 80 PVC Special Radius Conduit Sweeps are manufactured in
accordance with UL 651 and NEMA TC2 Standards. These sweeps are subject to in-process monitoring
and quality control inspection to assure conformance with design specifications. Belled-End sweeps and
optional bend radius’ are available upon request.
Standard radius
NOM.
A
MIN. WALL
B
SIZE O.D. AVG. SCH 40 SCH 80
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
2 1/2”
3”
3 1/2”
4”
5”
6”
0.840
1.050
1.315
1.660
1.900
2.375
2.875
3.500
4.000
4.500
5.563
6.625
0.109
0.113
0.133
0.140
0.145
0.154
0.203
0.216
0.226
0.237
0.258
0.280
0.147
0.154
0.179
0.191
0.200
0.218
0.276
0.300
N/A
0.337
0.375
0.432
R
PACKAGE QTY.
AVG. STD. RADIUS
90˚
45˚
30˚
22.5˚
1.500
1.500
1.875
2.000
2.000
2.000
3.000
3.125
3.250
3.375
3.625
3.750
50
25
25
20
25
20
10
75
75
60
42
25
50
25
25
20
20
20
25
75
75
75
42
25
50
25
25
20
20
20
25
75
75
75
42
25
50
25
50
75
20
20
40
75
50
40
20
25
4.000
4.500
5.750
7.250
8.250
9.500
10.500
13.000
15.000
16.000
24.000
30.000
Special radius - 90˚
NOM.
SIZE
A
O.D. AVG.
B
AVG.
18” Qty
1.315
1.875
X
100
1”
1.660
2.000
X
100
1 1/4”
1 1/2”
1.900
2.000
X
100
2.375
2.000
X
75
2”
2 1/2”
2.875
3.000
X
50
3”
3.500
3.125
X
50
4.000
3.250
X
50
3 1/2”
4.500
3.375
X
50
4”
5.563
3.625
5”
6.625
3.750
6”
• 22.5°, 30°, 45° special radius sweeps avaible
Radius & Package Quantity
24” Qty
30” Qty 36” Qty 48”
Qty
X
X
X
X
X
X
X
X
-
200
200
200
100
100
50
50
50
25
25
100
100
100
50
50
50
50
50
-
X
X
X
X
X
X
X
X
X
-
200
200
200
100
100
50
50
50
25
-
X
X
X
X
X
X
X
X
X
X
200
200
200
100
100
50
50
50
25
25
X
X
X
X
X
X
X
X
X
X
A 08
www.afielektrik.com
TECHNICAL GUIDELINE
Table 1: Premises Cable Conduit Fill Guidelines
Conduit
Area of Conduit
Minimum
Maximum Occupancy Recommended
A
B
C
Trade
Size
Internal
Diameter
mm
1/2
3/4
1
11/4
11/2
2
21/2
3
31/2
4
5
6
15.8
20.9
26.6
35.1
40.9
52.5
62.7
77.9
90.1
102.3
128.2
154.1
in
0.62
0.82
1.05
1.38
1.61
2.07
2.47
3.07
3.55
4.03
5.05
6.07
Crosss
sectional
Area
mm2
in2
197
345
559
973
1322
2177
3106
4794
6413
8268
12,984
18,760
0.30
0.53
0.87
1.51
2.05
3.39
4.82
7.45
9.96
12.83
20.15
29.11
1 Cable
53% Fill
mm2
104
183
296
516
701
1154
1646
2541
3399
4382
6882
9943
in2
0.16
0.28
0.46
0.80
1.09
1.80
2.56
3.95
5.28
6.80
10.68
15.43
2 Cables
31% Fill
mm2
in2
61
107
173
302
410
675
963
1486
1988
2563
4025
5816
0.09
0.16
0.27
0.47
0.64
1.05
1.49
2.31
3.09
3.98
6.25
9.02
3 Cables or
more, 40% Fill
mm2
in2
79
138
224
389
529
871
1242
1918
2565
3307
5194
7504
0.12
0.21
0.35
0.60
0.82
1.36
1.93
2.98
3.98
5.13
8.06
11.64
Radius
of Bends
D
E
Layers of Steel
Within Sheath
Other
Sheath
mm
in
mm
in
160
210
270
350
410
530
630
780
900
1020
1280
1540
6
8
11
14
16
21
25
31
36
40
50
60
100
130
160
210
250
320
630
780
900
1020
1280
1540
4
5
6
8
10
12
25
31
36
40
50
60
The first step in sizing a conduit is to determine the number of cables to be placed in the conduit.
This will determine the maximum fill allowance (see Table 2 below).
Table 2: Maximum Fill Ratio
Number of Cables in Conduit
1
2
3 or more
Maximum Fill (%)
53%
31%
40%
This document should be used as a guideline for cable fill requirements. Please keep in mind
that these requirements are min/max values and do not take into account additional factors that
may affect conduit fill or future cabling requirements. One of the more important of these factors
is maximum cable pulling tension, which may limit conduit fill more so than these guidelines and
should be carefully examined.
A 09
www.afielektrik.com