Broşür - teknopark

NATILUS
Smallcut Plate System
Retractor
Canal
Radial Fit
Low Contact
Locking
Options
Dynamic
Options
Dynamic
Compression
NATİLUS SMALLCUT PLATE SYSTEM
• Smallcut Locking Plate
• Smallcut Dynamic Plate
Natilus Smallcut plate system is a minimal invasive system. Additionally Natilus
Smallcut Plate System is more stable than traditional plate systems. In traditional
plate systems the loading is perpendicular to the screws, but in Natilus Smallcut
System the loading is less ten 90 degrees. That means less bending force at screws
and the plate. So early load bearing is available in Natilus Smallcut Plate system
Features
• Small incision is needed for application
• More stable than traditional plates
• MRI compatibility
Smallcut Incision
• Less bending force on the plate
Smallcut means small
incision for the application
• Canals in the ends for skin retractor
• Radial anatomic fit
• Site canal - low contact surface combination
• Site canals for multipurpose use
Indications
• Unique plate tips for easy application
Stabilization of long bones; Femur, tibia, humerus, radius, ulna...
• Dynamic compression ability
• Locking screw application in locking plates
Contraindications
• Dynamic loading in dynamic plates
• İnfection
• Unique screw tip for self drilling and tapping
• Severe osteoporotic bone
• Percutenous screw application
• Metal sensitivity
• Psychiatric conditions that patient can not cooperate.
www.spinamer.com
Specifications
Description
204.0304 to 204.0312
Natilus Smallcut Dynamic Plate 3mm (Stainless Steel)
204.0404 to 204.0412
Natilus Smallcut Dynamic Plate 4mm (Stainless Steel)
204.0504 to 204.0512
Natilus Smallcut Dynamic Plate 5mm (Stainless Steel)
Reference No.
Description
205.0304 to 205.0312
Natilus Smallcut Locking Plate 3mm (Stainless Steel)
204.0405 to 205.0412
Natilus Smallcut Locking Plate 4mm (Stainless Steel)
204.0505 to 205.0512
Natilus Smallcut Locking Plate 5mm (Stainless Steel)
Reference No.
Description
206.0306 to 206.0312
Natilus Normalcut Locking Plate 3mm (Stainless Steel)
206.0406 to 206.0412
Natilus Normalcut Locking Plate 4mm (Stainless Steel)
206.0506 to 206.0512
Natilus Normalcut Locking Plate 5mm (Stainless Steel)
Reference No.
Description
207.0306 to 207.0312
Natilus Normalcut Dynamic Plate 3mm (Stainless Steel)
207.0406 to 207.0412
Natilus Normalcut Dynamic Plate 4mm (Stainless Steel)
207.0506 to 207.0512
Natilus Normalcut Dynamic Plate 5mm (Stainless Steel)
Reference No.
Description
900.5020 to 900.5070
VS Metric Screw Ø5mm x 20mm to 70mm (SS)
902.5020 to 902.5070
VS Metric Locking Screw Ø5mm x 20mm to 70mm (SS)
904.5020 to 904.5070
VS Cortical Screw Ø5mm x 20mm to 70mm (SS)
906.5020 to 906.5070
900.4516 to 900.4570
VS Cortical Locking Screw Ø5mm x 20mm to 70mm (SS)
VS Metrik Screw Ø4.5mm x 16mm to 70mm (SS)
902.4516 to 902.4570
VS Metric Locking Screw Ø4.5mm x 16mm to 70mm (SS)
904.4516 to 904.4570
VS Cortical Screw Ø4.5mm x 16mm to 70mm (SS)
906.4516 to 906.4570
VS Cortical Locking Screw Ø4.5mm x 16mm to 70mm (SS)
900.3510 to 900.3550
VS Metrik Screw Ø3.5mm x 10mm to 50mm (SS)
902.3510 to 902.3550
VS Metric Locking Screw Ø3.5mm x 10mm to 50mm (SS)
904.3510 to 904.3550
VS Cortical Screw Ø3.5mm x 10mm to 50mm (SS)
906.3510 to 906.3550
VS Cortical Locking Screw Ø3.5mm x 10mm to 50mm (SS)
900.2710 to 900.2740
VS Metrik Screw Ø2.7mm x 10mm to 40mm (SS)
902.2710 to 902.2740
VS Metric Locking Screw Ø2.7mm x 10mm to 40mm (SS)
904.2710 to 904.2740
VS Cortical Screw Ø2.7mm x 10mm to 40mm (SS)
906.2710 to 906.2740
VS Cortical Locking Screw Ø2.7mm x 10mm to 40mm (SS)
Headquarters:
Metroport Busidence No :143, E5 Üzeri Kültür
Sokak No: 1, 34180 Bahcelievler / Istanbul
Tel: +90 212 442 50 00 Fax: +90 212 442 46 34
E- mail: [email protected]
www.spinamer.com
R00
Image
Reference No.
Image
Image
Image
Image
R&D Department:
Yildiz Technical University
Davutpasa Campus, Technology Development Zone
B2 Block, No: 14, Esenler / Istanbul
Tel: +90 212 442 50 00 Fax: +90 212 442 46 34
E-mail: [email protected]
Design © 2013 ahmed helmy
Factory:
Sanayi Mah. 1715. Sok. No: 32
34538 Esenyurt / Istanbul
Tel: +90 212 44 16 444 Fax: +90 212 442 46 34
E-mail: [email protected]
Supported by kosgeb
www.kosgev.gov.tr
Printed by Erkam Yayın San. Mam. ve Bilgisayar Ürün İm. Tic. A.Ş. 20.12.2013
OrtoVia
External Fixator System
Practically Stable
Modularity
Smart
3D joint
Joint
Cancelling
Easy Pin
Holding
Multiaxis Pin
Insertion
Unique
Pin Tip
ORTOVIA 3D Lower Extremity Fixator System
Fixator Modules:
ORTOVIA 3D Fixator System is a series of modular monolateral external fixator
Adult Fixator:
that was developed under many years of clinical experience.
• Clamp : Metaphysis Clamp, Poly Clamp, Sliding Clamp, Half Sliding Clamp.
• Joint : 3D Joint, BS Joint
Features
• Body : L20, L25, L30
•Modularity
Pediatric Fixator:
•Easy application
• Clamp : Pediatric Metafiz Clamp, Pediatric Sliding Clamp
• Short surgery time
• Joint : Pediatric 3D, Pediatric BS Joint
• MRI compatability
• Distractor : P15, P20, P25
• Flexibility - Versatility
• Stability & safety in corrections
• Patient’s comfort
• Radiolucent components
• Short learning curve
Indications
• Short Stature
• Bone loss
• Open fractures
• Comminuted fractures
• Non-union
• Angular deformities
• Limb reconstruction
www.spinamer.com
Specifications
ORTOVIA FIXATOR
Reference No.
Description
100.4130
ORTOVIA Fixator Body L20
100.4131
100.4132
ORTOVIA Fixator Body L25
ORTOVIA Fixator Body L30
100.4114
ORTOVIA Slindig Clamp
100.4115
ORTOVIA Half Slindig Clamp
100.4116
ORTOVIA Methaphisis Clamp
100.4233
ORTOVIA LS2O
100.4220
ORTOVIA L20
100.4221
ORTOVIA L25
100.4222
ORTOVIA L30
100.4223
ORTOVIA LS
100.4240
ORTOVIA R20
100.4241
ORTOVIA R25
100.4242
ORTOVIA R30
100.4243
ORTOVIA RS
Image
VIAFIX FIXATOR
Reference No.
Description
101.1000
VIAFIX Fixator Short Body
101.1001
VIAFIX Fixator Medium Body
101.1002
VIAFIX Fixator Long Body
101.1010
VIAFIX Sliding Clamp
101.1020
VIAFIX Poly Clamp
101.1030
VIAFIX Mono Clamp
101.1040
VIAFIX Fixator Rod 150mm
101.1041
VIAFIX Fixator Rod 200mm
101.1042
VIAFIX Fixator Rod 250mm
101.1043
VIAFIX Fixator Rod 300mm
101.1050
VIAFIX Fixator Ball-Socket Joint
101.1051
VIAFIX Fıxator Hinge-Joint
101.1052
VIAFIX Fixator Connector-joint
101.2000
VIAFIX D Fixator Short
101.2001
VIAFIX D Fixator Medium
101.2002
VIAFIX D Fixator Long
101.2010
VIAFIX DT Fixator
101.2011
VIAFIX D Hip Clamp
Headquarters:
Metroport Busidence No :143, E5 Üzeri Kültür
Sokak No: 1, 34180 Bahcelievler / Istanbul
Tel: +90 212 442 50 00 Fax: +90 212 442 46 34
E- mail: [email protected]
www.spinamer.com
R00
Image
R&D Department:
Yildiz Technical University
Davutpasa Campus, Technology Development Zone
B2 Block, No: 14, Esenler / Istanbul
Tel: +90 212 442 50 00 Fax: +90 212 442 46 34
E-mail: [email protected]
Design © 2013 ahmed helmy
Factory:
Sanayi Mah. 1715. Sok. No: 32
34538 Esenyurt / Istanbul
Tel: +90 212 44 16 444 Fax: +90 212 442 46 34
E-mail: [email protected]
Supported by kosgeb
www.kosgev.gov.tr
Printed by Erkam Yayın San. Mam. ve Bilgisayar Ürün İm. Tic. A.Ş. 20.12.2013
ANT SCREW
ANT SCREW SYSTEMS
Multifunction Screws
Dual
Threads
Augmentation
Hole
Anchor
Use
Cannulated
Options
Percutaneous
Options
Unique
Tip
ANT SCREW SYSTEMS
INDICATIONS:
• Canulated screw
• Alignment and stabilization of bone fractures; such as wrist,elbow,foot,ankle,k
• Percutenous solid screws
nee,patella,hip,etc.
• Nonunions and malunions
FEATURES:
• Ligament reconstruction.
• Designed to stabilize bone fragments.
• Arthrodesis of the foot,ankle,wrist,elbow and hand.
• Threaded head provides interfragmentary compression.
• Agumentation of fracture fixation by wire or cable via the hole on the head
• Threaded conical head design minimizes hardware prominence and soft tissue
irritation.
CONTRAINDICATIONS:
• Ability of soft tissue augmentation by the hole on the head.
• Active infection
• Ability of wire augmentation via the hole on the head to fix the fragments.
• Patient conditions including blood supply limitations,
• Self driling and tapping ability.
• Insufficient quantity or of bone
• Patients with mental or neurologic conditions who are unwilling or incapaple
of following postoperative care instructions.
• Foreign body sensitivity.
www.spinamer.com
Specifications
SCREW SIZES:
Shaft / thread : lenght
1.6 / 2.5mm: 10-30 mm in 2mm increment in lenght.
2.0 / 3.0mm: 10-30 mm in 2mm increment in lenght.
2.5 / 3.5mm: 20-50 mm in lenght with 2 mm increment and 50-70mm with 5mm increment.
3.5 / 4.5mm: 20-100mm in lenght, 20-50mm with 2mm and 50-100mm with 5mm increment.
4.5 / 6.5mm: 16-120mm in lenght, 16-30mm with 2mm increment and 30-120mm with 5mm.
Both canulated and uncanulated screws are avalable.
Presented as microANT and ANT Screw set:
microANT Screw set:
1.6 / 2.5mm screws
2.0 / 3.0mm screws
2.5 / 3.5mm screws
Both canulated and solid
ANT Screw set :
3.5 /4.5mm screws
4.5/6.5mm screws
Both canulated and solid
ANT Screws and microAnt Screws
Reference No.
Description
946.4520 to 946.4600
ORTOVIA Ant Solid Screw 20mm to 100mm Ø4.5mm (Ti)
948.4520 to 948.4600
ORTOVIA Ant Cannulated Screw 20mm to 100mm Ø4.5mm (Ti)
946.6520 to 946.6620
ORTOVIA Ant Solid Screw 20mm to 120mm 25mm Thread Ø6.5mm (Ti)
948.6675 to 948.6620
ORTOVIA Ant Cannulated Screw 20mm to 120mm 25mm Thread Ø6.5mm (Ti)
946.6775 to 946.6720
ORTOVIA Ant Solid Screw 75mm to 120mm 35mm Thread Ø6.5mm (Ti)
948.6775 to 948.6720
ORTOVIA Ant Cannulated Screw 75mm to 120mm 35mm Thread Ø6.5mm (Ti)
Reference No.
Description
946.2016 to946.2030
ORTOVIA microAnt Solid Screw 16mm to 30mm Ø2.5mm (Ti)
948.2016 to948.2030
ORTOVIA microAnt Cannulated Screw 16mm to 30mm Ø2.5mm (Ti)
946.3016 to946.3030
ORTOVIA microAnt Solid Screw 16mm to 30mm Ø3.0mm (Ti)
948.3016 to948.3030
ORTOVIA microAnt Cannulated Screw 16mm to 30mm Ø3.0mm (Ti)
946.3520 to946.3670
ORTOVIA microAnt Solid Screw 16mm to 30mm Ø3.5mm (Ti)
948.3520 to948.3670
ORTOVIA microAnt Cannulated Screw 16mm to 30mm Ø3.5mm (Ti)
Headquarters:
Metroport Busidence No :143, E5 Üzeri Kültür
Sokak No: 1, 34180 Bahcelievler / Istanbul
Tel: +90 212 442 50 00 Fax: +90 212 442 46 34
E- mail: [email protected]
www.spinamer.com
R00
Image
Image
R&D Department:
Yildiz Technical University
Davutpasa Campus, Technology Development Zone
B2 Block, No: 14, Esenler / Istanbul
Tel: +90 212 442 50 00 Fax: +90 212 442 46 34
E-mail: [email protected]
Design © 2013 ahmed helmy
Factory:
Sanayi Mah. 1715. Sok. No: 32
34538 Esenyurt / Istanbul
Tel: +90 212 44 16 444 Fax: +90 212 442 46 34
E-mail: [email protected]
Supported by kosgeb
www.kosgev.gov.tr
Printed by Erkam Yayın San. Mam. ve Bilgisayar Ürün İm. Tic. A.Ş. 20.12.2013
ACONDA DC
Dynamic Screw System
Stabilize Your Dynamic Compression
Dynamic
Compression
Locked DC
Cannulated
Option
Headless
Design
Self Drillingtapping
ACONDA DC SCREW
• Insufficient quantity or quality of the bone
1. Cannulated
• Patients with mental or neurological disability
2. Percutanous
• Foreign body sensitivity.
Percutenous
Application
“Stalize your dynamic compression”
Features:
Available in cannulated and percutaneous solid screws.
Designed to stalize large bone fragments.
Threaded sleeve helps interfragmentary compression
Threaded sleeve strengthens the screw stabilization
Dynamic compression of the fragments
Stabilization of dynamic compression
Headless design minimizes soft tissue irritation
Self drilling and tapping ability
Material: Titanium alloy, stainless steel.
Indications:
• Alignment and stabilization of large bone fragments
• Stabilization of periarticular fractures of large joints
• Nonunions or malunions of large bone fragments
• Arthrodesis of large joints; foot, knee, ankle, elbow
Contraindications
• Small bone fragmens
• Active infection in surgical area
• Systemic contraindications for the surgery
www.spinamer.com
Specifications
Implant Specifications:
Consist of 3 parts:
1. Sleeves:
• Threaded outer surface
• Diameter: 9.0mm
• 25mm and 32mm in lenght
2. Lag screws:
• Cannulated and percutaneous solid obtions
• Diameter: 6.5mm
• Lenght: 70,75,80,85,90,95,100,105,110,115,120,125,130 mm
3. Sleeve-stop screw:
• Fixes lag screw to sleeve
ORTOVIA Aconda DC Screw
Reference No.
Description
928.0050 to 928.0130
ORTOVIA Aconda DC Screw Ø6.5mm x50 mm to 130mm (Stainless Steel)
928.1050 to 928.1130
ORTOVIA Aconda DC Screw Ø6.5mm x50mm to 130mm (Titanium)
928.4550 to 928.4600
ORTOVIA Aconda DC Screw Ø4.5mm x50mm to 100mm (Stainless Steel)
928.4650 to 928.4700
ORTOVIA Aconda DC Screw Ø4.5mm x50mm to 100mm (Titanium)
928.2050 to 928.0130
ORTOVIA Aconda DC Cannulated Screw Ø6.5mm x50 mm to 130mm (S. Steel)
928.3050 to 928.1130
ORTOVIA Aconda DC Cannulated Screw Ø6.5mm x50mm to 130mm (Titanium)
928.5550 to 928.4600
ORTOVIA Aconda DC Cannulated Screw Ø4.5mm x50mm to 100mm (S. Steel)
928.5650 to 928.4700
ORTOVIA Aconda DC Cannulated Screw Ø4.5mm x50mm to 100mm (Titanium)
Reference No.
Description
928.6030
ORTOVIA Aconda Sleeve Ø9.0mm x 32mm (Stainless Steel)
928.6130
ORTOVIA Aconda Sleeve Ø9.0mm x 32mm (Titanium)
928.6031
ORTOVIA Aconda Sleeve Ø9.0mm x 25mm (Stainless Steel)
928.6131
ORTOVIA Aconda Sleeve Ø9.0mm x 25mm (Titanium)
Headquarters:
Metroport Busidence No :143, E5 Üzeri Kültür
Sokak No: 1, 34180 Bahcelievler / Istanbul
Tel: +90 212 442 50 00 Fax: +90 212 442 46 34
E- mail: [email protected]
www.spinamer.com
R00
Image
Image
R&D Department:
Yildiz Technical University
Davutpasa Campus, Technology Development Zone
B2 Block, No: 14, Esenler / Istanbul
Tel: +90 212 442 50 00 Fax: +90 212 442 46 34
E-mail: [email protected]
Design © 2013 ahmed helmy
Factory:
Sanayi Mah. 1715. Sok. No: 32
34538 Esenyurt / Istanbul
Tel: +90 212 44 16 444 Fax: +90 212 442 46 34
E-mail: [email protected]
Supported by kosgeb
www.kosgev.gov.tr
Printed by Erkam Yayın San. Mam. ve Bilgisayar Ürün İm. Tic. A.Ş. 20.12.2013
ACONDA Pediatric
Modular Hip Plate
Modularity
Minimaly
Invasive
Cannulated
Lag Screw
Adjustable
Angle
ACONDA PEDIATRIC HIP PLATE SYSTEM
• Osteopenic bone
• Smallcut Locking Plate
• Nonunions or malunions
• Smallcut Dynamic Plate
Trochanter
Fixation
Low Contact
Surface
Contraindicated:
Aconda Pediatric Hip Plate System fixes proximal femur in children sizes.
• İnfection of surgical region
The system has smallcut locking and dynamic models.
• Severe osteoporosis and avascular necrosis
Both titanium and stainless steel made models are available
• Psychological conditions that the patient can not tolerate the postoperative
regulation
Features:
• Metastatic or malignant disasees of the surgical area
Modularity
Minimaly invasive
Trochanter major fixation
Adjustable plate angle
Radial fit
Unique plate tip
Low contact surface
Conical and low profile
Dynamic and locking obtions
Cannulated lag screw obtions
Unique Screws with unique tip.
İndications:
Indicated for fixation of proxiaml femur in children:
• Fractures of the trochanteric region:
• Osteotomies of the proximal femur
• Metastatic fracture of the proximal femur
www.spinamer.com
Specifications
ACONDA Pediatric Plate
Image
Reference No.
Description
200.4502 to 200.4506
ORTOVIA Aconda Pediatric Smallcut Dynamic Hip Plate 4mm (Stainless Steel)
200.5502 to 200.5506
ORTOVIA Aconda Pediatric Smallcut Dynamic Hip Plate 4mm (Titanium)
201.4502 to 201.4506
ORTOVIA Aconda Pediatric Smallcut Locking Hip Plate 4mm (Stainless Steel)
201.5502 to 201.5506
ORTOVIA Aconda Pediatric Smallcut Locking Hip Plate 4mm (Titanium)
202.4502 to 202.4506
ORTOVIA Aconda Pediatric Normocut Locking Hip Plate 4mm (Stainless Steel)
202.4502 to 202.5506
ORTOVIA Aconda Pediatric Normocut Locking Hip Plate 4mm (Titanium)
203.4502 to 203.4506
ORTOVIA Aconda Pediatric Normocut Dynamic Hip Plate 4mm (Stainless Steel)
203.5502 to 203.5506
ORTOVIA Aconda Pediatric Normocut Dynamic Hip Plate 4mm (Titanium)
Dynamic Screw Ø4.0mm
Reference No.
Description
Image
904.4016 to 904.4042
VS Cortical Screw Ø4mm x 16mm to 42mm (Stainless Steel)
905.4016 to 905.4042
VS Cortical Screw Ø4mm x 16mm to 42mm (Titanium)
Ascends 2mm till 42mm
Locking Screw Ø4.5mm
Reference No.
Description
Image
908.4520 to 908.4560
VS Locking Cortical Screw Ø4.5mm x 20mm to 60mm (Stainless Steel)
909.4520 to 909.4560
VS Locking Cortical Screw Ø4.5mm x 20mm to 60mm (Titanium)
Ascends 5mm till 60mm
Locking Lag Screw Ø5.0mm
Reference No.
Description
Image
910.5030 to 910.5100
910.5030 to 911.5100
Locking Lag Screw Ø5.0mm x 30mm to 100mm (Stainless Steel)
Locking Lag Screw Ø5.0mm x 30mm to 100mm (Titanium)
910.5030 to 912.5100
Locking Cannulated Lag Screw Ø5.0mm x 30mm to 100mm (Stainless Steel)
910.5030 to 913.5100
Locking Cannulated Lag Screw Ø5.0mm x 30mm to 100mm (Titanium)
Ascends 5mm till 100mm
Specifications:
• Lenght: 30,35,40…….,90,95,100mm
Plate:
• Angled plate with 100 degrees.
4.5mm Locking Cortical Screw:
• Plate bending site
• 4.5mm locking cortical screw with 110 degree
• Trochanter major fixation canal
• Lenght: 20,25,30,…….60mm
• Low contact surface
• Unique screw tip for self drilling and tapping
• Anatomic radial fit
• Unique tip for skin retractor
4.0mm Cortical Shaft Screw:
• Smallcut or normalcut options
• Locking or dynamic screw
• Dynamic or locking shaft holes
• Lenght: 16,18,20………42mm
• Plate Sizes: 2,3,4,5,6-holes
• Unique screw tip for self drilling and tapping
Lag Screw:
• 5mm locking lag screw
115 degree to long part of the plate
• Cunnulated option
Headquarters:
Metroport Busidence No :143, E5 Üzeri Kültür
Sokak No: 1, 34180 Bahcelievler / Istanbul
Tel: +90 212 442 50 00 Fax: +90 212 442 46 34
E- mail: [email protected]
www.spinamer.com
R00
R&D Department:
Yildiz Technical University
Davutpasa Campus, Technology Development Zone
B2 Block, No: 14, Esenler / Istanbul
Tel: +90 212 442 50 00 Fax: +90 212 442 46 34
E-mail: [email protected]
Design © 2013 ahmed helmy
Factory:
Sanayi Mah. 1715. Sok. No: 32
34538 Esenyurt / Istanbul
Tel: +90 212 44 16 444 Fax: +90 212 442 46 34
E-mail: [email protected]
Supported by kosgeb
www.kosgev.gov.tr
Printed by Erkam Yayın San. Mam. ve Bilgisayar Ürün İm. Tic. A.Ş. 20.12.2013
HyperFlex
Spinal System
HyperFlex
“ Flexible Stability ”
Modularity
Polyaxial
Screw
Monoaxial
Screw
MONOPOLY SPINAL SYSTEM (Adult Set)
The system has modular design: Polyaxial, monoaxial, reduction and cannulated
Hyperflex
Screw
Cannulated
Screw
Reduction
Screw
• Failed fusion
screws are represented as tulip head and screw shafts separately offering wide
CONTRAINDICATIONS:
range of combination.
• Morbid obesity
Ergonomic tool design offers safer and shorter operation time.
• Severe psychiatric diseases
• Alcoholism and drug addiction
ADVANTAGES:
• Pregnancy
• Moduler cups and screw shafts for various combinations
• Metal sensetivity / allergies
• Pratical and safe design
• Severe osteoporosis
• Easy screw application
• Double flattened rod for derotation effect
•Eeasy transverse connector application
• Easy rod application with practical rod suppressor
• Practical and safe set screw design and application
• Low profile screw design
• Safer for screw pull out
• Ergonomic and anatomic tool design
INDICATIONS:
Posterior stabilization of thoracic and lumbar spine pathologies:
• Trauma
• Deformities: scoliosis,kyphosis,
• Degenerative spine diseases
• Spondylolisthesis
• Spinal stenosis
• Tumor
• Pseudoarthrosis
www.spinamer.com
Specifications
ORTOVIA Hyperflex Spinal System
Reference No.
Description
820.5030 to 820.5045
Hyperflex Poliaxial Pedicular Screw Ø5.0mm x 30 to 45mm
820.5530 to 820.5545
Hyperflex Poliaxial Pedicular Screw Ø5.5mm x 30 to 45mm
820.6030 to 820.6060
Hyperflex Poliaxial Pedicular Screw Ø6.0mm x 30 to 60mm
820.6535 to 820.6560
Hyperflex Poliaxial Pedicular Screw Ø6.5mm x 35 to 60mm
820.7035 to 820.7065
Hyperflex Poliaxial Pedicular Screw Ø7.0mm x 35 to 65mm
Reference No.
Description
807.5030 to 807.5045
Hyperflex Monoaxial Pedicular Screw Ø5.0mm x 30 to 45mm
807.5530 to 807.5545
Hyperflex Monoaxial Pedicular Screw Ø5.5mm x 30 to 45mm
807.6030 to 807.6060
Hyperflex Monoaxial Pedicular Screw Ø6.0mm x 30 to 60mm
807.6535 to 807.6560
Hyperflex Monoaxial Pedicular Screw Ø6.5mm x 35 to 60mm
807.7035 to 807.7065
Hyperflex Monoaxial Pedicular Screw Ø7.0mm x 35 to 65mm
Reference No.
Description
855.5530 to 855.5555
Hyperflex Poliaxial Pedicular Canulated Ø5.5 x 30 to 55mm
855.6030 to 855.6060
Hyperflex Poliaxial Pedicular Canulated Ø6.0 x 30 to 60mm
855.6535 to 855.6560
Hyperflex Poliaxial Pedicular Canulated Ø6.5 x 35 to 60mm
855.7035 to 855.7065
Hyperflex Poliaxial Pedicular Canulated Ø7.0 x 35 to 65mm
Reference No.
Description
842.5530 to 842.5555
Hyperflex Monoaxial Pedicular Canulated Ø5.5 x 30 to 55mm
842.6030 to 842.6060
Hyperflex Monoaxial Pedicular Canulated Ø6.0 x 30 to 60mm
842.6535 to 842.6560
Hyperflex Monoaxial Pedicular Canulated Ø6.5 x 35 to 60mm
842.7035 to 842.7065
Hyperflex Monoaxial Pedicular Canulated Ø7.0 x 35 to 65mm
Reference No.
Description
810.5030 to 810.5045
Hyperflex Poliaxial Redüksiyon Pedicular Screw Ø5.0mm x 30 to 45mm
810.5530 to 810.5545
Hyperflex Poliaxial Redüksiyon Pedicular Screw Ø5.5mm x 30 to 45mm
810.6030 to 810.6060
Hyperflex Poliaxial Redüksiyon Pedicular Screw Ø6.0mm x 30 to 60mm
810.6535 to 810.6560
Hyperflex Poliaxial Redüksiyon Pedicular Screw Ø6.5mm x 35 to 60mm
810.7035 to 810.7065
Hyperflex Poliaxial Redüksiyon Pedicular Screw Ø7.0mm x 35 to 65mm
Reference No.
Description
817.5030 to 817.5045
Hyperflex Monoaxial Redüksiyon Pedicular Screw Ø5.0mm x 30 to 45mm
817.5530 to 817.5545
Hyperflex Monoaxial Redüksiyon Pedicular Screw Ø5.5mm x 30 to 45mm
817.6030 to 817.6060
Hyperflex Monoaxial Redüksiyon Pedicular Screw Ø6.0mm x 30 to 60mm
817.6535 to 817.6560
Hyperflex Monoaxial Redüksiyon Pedicular Screw Ø6.5mm x 35 to 60mm
817.7035 to 817.7065
Hyperflex Monoaxial Redüksiyon Pedicular Screw Ø7.0mm x 35 to 65mm
Headquarters:
Metroport Busidence No :143, E5 Üzeri Kültür
Sokak No: 1, 34180 Bahcelievler / Istanbul
Tel: +90 212 442 50 00 Fax: +90 212 442 46 34
E- mail: [email protected]
www.spinamer.com
R00
Image
Image
Image
Image
Image
Image
R&D Department:
Yildiz Technical University
Davutpasa Campus, Technology Development Zone
B2 Block, No: 14, Esenler / Istanbul
Tel: +90 212 442 50 00 Fax: +90 212 442 46 34
E-mail: [email protected]
Design © 2013 ahmed helmy
Factory:
Sanayi Mah. 1715. Sok. No: 32
34538 Esenyurt / Istanbul
Tel: +90 212 44 16 444 Fax: +90 212 442 46 34
E-mail: [email protected]
Supported by kosgeb
www.kosgev.gov.tr
Printed by Erkam Yayın San. Mam. ve Bilgisayar Ürün İm. Tic. A.Ş. 20.12.2013
Monopoly
Spinal System
Monopoly
Practically Stable
Modularity
Polyaxial
Screw
Monopoly
Screw
MONOPOLY SPINAL SYSTEM
• Adult set
• Pediatric set
Monopoly
Reduction
Cannulated
Screw
Polyaxial
Reduction
The system is used for the following pathologies:
• Trauma
• Deformities: scoliosis,kyphosis,
• Degenerative disc disease
The system has modular design.
• Spondylolisthesis
Polyaxial, monoaxial and cannulated screws are represented as tulip head and
• Spinal stenosis
screw shafts separately offering wide range of combination.
• Tumor
Ergonomic tool design offers safer and shorter operation time.
• Pseudoarthrosis
• Failed fusion
ADVANTAGES:
• Moduler cups and screw shafts for various combinations
CONTRAINDICATIONS:
• Pratical and safe design
• Morbid obesity
• Easy screw application
• Severe psychiatric diseases
• Double flattened rod for derotation effect
• Alcoholism and drug addiction
•Eeasy transverse connector application
• Pregnancy
• Easy rod application with practical rod suppressor
• Metal sensetivity / allergies
• Practical and safe set screw design and application
• Severe osteoporosis
• Low profile screw design
• Safer for screw pull out
• Ergonomic and anatomic tool design
INDICATIONS:
The spinal systems are used for posterior stabilization of thoracic and lumbar
spine pathologies.
www.spinamer.com
Specifications
ORTOVIA Monopoly Spinal System
Reference No.
Description
800.5030 to 800.5045
Monopoly Poliaxial Pedicular Screw Ø5.0mm x 30 to 45mm
800.5530 to 800.5545
Monopoly Poliaxial Pedicular Screw Ø5.5mm x 30 to 45mm
800.6030 to 800.6060
Monopoly Poliaxial Pedicular Screw Ø6.0mm x 30 to 60mm
800.6535 to 800.6560
Monopoly Poliaxial Pedicular Screw Ø6.5mm x 35 to 60mm
800.7035 to 800.7065
Monopoly Poliaxial Pedicular Screw Ø7.0mm x 35 to 65mm
Reference No.
Description
805.5030 to 805.5045
Monopoly Monoaxial Pedicular Screw Ø5.0mm x 30 to 45mm
805.5530 to 805.5545
Monopoly Monoaxial Pedicular Screw Ø5.5mm x 30 to 45mm
805.6030 to 805.6060
Monopoly Monoaxial Pedicular Screw Ø6.0mm x 30 to 60mm
805.6535 to 805.6560
Monopoly Monoaxial Pedicular Screw Ø6.5mm x 35 to 60mm
805.7035 to 805.7065
Monopoly Monoaxial Pedicular Screw Ø7.0mm x 35 to 65mm
Reference No.
Description
830.5530 to 830.5555
Monopoly Poliaxial Pedicular Canulated Ø5.5 x 30 to 55mm
830.6030 to 830.6060
Monopoly Poliaxial Pedicular Canulated Ø6.0 x 30 to 60mm
830.6535 to 830.6560
Monopoly Poliaxial Pedicular Canulated Ø6.5 x 35 to 60mm
830.7035 to 830.7065
Monopoly Poliaxial Pedicular Canulated Ø7.0 x 35 to 65mm
Reference No.
Description
840.5530 to 840.5555
Monopoly Monoaxial Pedicular Canulated Ø5.5 x 30 to 55mm
840.6030 to 840.6060
Monopoly Monoaxial Pedicular Canulated Ø6.0 x 30 to 60mm
840.6535 to 840.6560
Monopoly Monoaxial Pedicular Canulated Ø6.5 x 35 to 60mm
840.7035 to 840.7065
Monopoly Monoaxial Pedicular Canulated Ø7.0 x 35 to 65mm
Reference No.
Description
810.5030 to 810.5045
Monopoly Poliaxial Redüksiyon Pedicular Screw Ø5.0mm x 30 to 45mm
810.5530 to 810.5545
Monopoly Poliaxial Redüksiyon Pedicular Screw Ø5.5mm x 30 to 45mm
810.6030 to 810.6060
Monopoly Poliaxial Redüksiyon Pedicular Screw Ø6.0mm x 30 to 60mm
810.6535 to 810.6560
Monopoly Poliaxial Redüksiyon Pedicular Screw Ø6.5mm x 35 to 60mm
810.7035 to 810.7065
Monopoly Poliaxial Redüksiyon Pedicular Screw Ø7.0mm x 35 to 65mm
Reference No.
Description
815.5030 to 815.5045
Monopoly Monoaxial Redüksiyon Pedicular Screw Ø5.0mm x 30 to 45mm
815.5530 to 815.5545
Monopoly Monoaxial Redüksiyon Pedicular Screw Ø5.5mm x 30 to 45mm
815.6030 to 815.6060
Monopoly Monoaxial Redüksiyon Pedicular Screw Ø6.0mm x 30 to 60mm
815.6535 to 815.6560
Monopoly Monoaxial Redüksiyon Pedicular Screw Ø6.5mm x 35 to 60mm
815.7035 to 815.7065
Monopoly Monoaxial Redüksiyon Pedicular Screw Ø7.0mm x 35 to 65mm
Headquarters:
Metroport Busidence No :143, E5 Üzeri Kültür
Sokak No: 1, 34180 Bahcelievler / Istanbul
Tel: +90 212 442 50 00 Fax: +90 212 442 46 34
E- mail: [email protected]
www.spinamer.com
R00
Image
Image
Image
Image
Image
Image
R&D Department:
Yildiz Technical University
Davutpasa Campus, Technology Development Zone
B2 Block, No: 14, Esenler / Istanbul
Tel: +90 212 442 50 00 Fax: +90 212 442 46 34
E-mail: [email protected]
Design © 2013 ahmed helmy
Factory:
Sanayi Mah. 1715. Sok. No: 32
34538 Esenyurt / Istanbul
Tel: +90 212 44 16 444 Fax: +90 212 442 46 34
E-mail: [email protected]
Supported by kosgeb
www.kosgev.gov.tr
Printed by Erkam Yayın San. Mam. ve Bilgisayar Ürün İm. Tic. A.Ş. 20.12.2013
ACONDA
Modular Hip Plate System
“excellent hip solutions”
Minimaly
invasive
Anotomic
plate
Locking
Dynamic
Cannulated
lag screws
T.major
Fixation
Low contact
surface
ACONDA MODULAR HIP PLATE SYSTEM
• Smallcut Plate
• Normalcut Plate
Aconda is an anatomic and dynamic plate for fixation of proximal femur having five modules to fix proximal femur. The system has normalcutl and smallcut
models having locking and dynamic models. The material is MRI friendly stainless
steel.
Indications
• Fractures of proximal femur
• Combined fractures of the proximal femur and ipsilateral shaft fractures
• Metastatic fracture of the proximal femur
• Osteotomies of the proximal femur
• Osteopenic bone
• Nonunions or malunions
Contraindications
• İnfection of surgical region
• Severe osteoporosis and avascular necrosis
• Metal sensitivity
• Metastatic or malignant disasees of the surgical area
• Psychological conditions that the patient can not tolerate the postoperative care
www.spinamer.com
Specifications
Reference No.
Description
200 0602 to 200 0608
Aconda Smallcut Dynamic Plate 6mm (S. Steel) (2 to 8 holes)
201 0602 to 201 0608
Aconda Smallcut Locking Plate 6mm (S. Steel) (2 to 8 hole)
202 0602 to 200 0608
Aconda Normalcut Locking Plate 6mm (S. Steel) (2 to 8 hole)
203 0602 to 200 0608
Aconda Normalcut Dynamic Plate 6mm (S. Steel) (2 to 8 holes)
Reference No.
Description
928 0050 to 9280130
Aconda Dynamic Compression Screw ø 6.5mm (S. Steel) (50 to 130mm)
929 0050 to 9280130
Aconda Cannulated Dynamic Comp. Screw ø 6.5mm (S. Steel) (50 to 130mm)
928 6030
Aconda Compression Threaded Sleeve ø 9.0 X 32mm (S. Steel)
928 6031
Aconda Compression Threaded Sleeve ø 9.0 X 25mm (S. Steel)
Reference No.
Description
918 3516 to 918 3560
Aconda Major Screw ø 3.5mm (S. Steel) X 16mm to 60mm
Reference No.
Description
906 5020 to 906 5070
VS Cortical Screw ø 5.0mm (S. Steel) x 20mm to 70mm
906 5020 to 906 5070
VS Cortical Locking Screw ø 5.0mm (S. Steel) x 20mm to 70mm
Reference No.
Description
919 1650
Ortovia Cable ø 1.6mm ( S. Steel)
919 1750
Ortovia Cable ø 1.7mm ( S. Steel)
919 2050
Ortovia Cable ø 2.0mm (S. Steel)
Headquarter & Sales:
Metroport Busidence No :143, E5 Üzeri Kültür
Sokak No: 1, 34180 Bahcelievler / Istanbul
Tel: +90 212 442 50 00 Fax: +90 212 442 46 34
[email protected], [email protected]
www.spinamer.com
R00
Image
Image
Image
Image
Image
R&D Department:
Yildiz Technical University
Davutpasa Campus, Technology Development Zone
B2 Block, No: 114, Esenler / Istanbul
Tel: +90 212 442 50 00 Fax: +90 212 442 46 34
E-mail: [email protected]
Design © 2013 ahmed helmy
Factory:
Sanayi Mah. 1715. Sok. No: 32
34538 Esenyurt / Istanbul
Tel: +90 212 44 16 444 Fax: +90 212 442 46 34
E-mail: [email protected]
Supported by kosgeb
www.kosgev.gov.tr
Printed by Erkam Yayın San. Mam. ve Bilgisayar Ürün İm. Tic. A.Ş. 20.12.2013
ORTOVIA
Upper Extremity
“Smart Fixation”
Dorsal-side
fixing
radiolucent
Joint
telescopic
Body
Slyding
clamp
Easy
lengthening
MRI
Compatability
Fixat Types
• Wrist
• Forearm
• Humerus
ORTOVIA Upper Extremity Fixator System is a series of modular monolateral external fixators for upper extremity that was developed under many years of clinical experience. The system is composed of wrist, forearm and humerus fixators.
Features
• Modularity
• Easy application
• Short surgery time
• MRI compatability
• Flexibility-versatility
• Stability & safety in corrections
• Patient’s comfort
• Radiolucent components
• Short learning curve
Indications
• Bone loss
• Open fractures
• Comminuted fractures
• Non-union
• Angular deformities
• Limb reconstruction
www.spinamer.com
Specifications
Reference No.
Description
8680628122357
Ortovia Slyding Clamp Small
8680628122371
Ortovia Metaphysis Clamp Small
8680628122388
Ortovia Polyclamp Small
8680628122401
Ortovia Open Clamp Small
8680628136439
Ortovia 3D Joint Small
8680628136477
Ortovia Hinge Joint Small
8680628136507
Ortovia Fixator Body LS10
8680628136514
Ortovia Fixator Body LS20
8680628136521
Ortovia Fixator Body LS25
8680628122999
Ortovia Wrist Fixator Short
8680628123002
Ortovia Wrist Fixator Long
Reference No.
Description
8680628123705
Ortovia Shanz Screw 20mm Thread (S.Steel) Ø3X50MM
8680628123712
Ortovia Shanz Screw 20mm Thread (S.Steel) Ø3X60MM
8680628123729
Ortovia Shanz Screw 20mm Thread (S.Steel) Ø3X70MM
8680628123033
Ortovia Shanz Screw 35mm Thread (S.Steel) Ø3X70MM
8680628123040
Ortovia Shanz Screw 35mm Thread (S.Steel) Ø4X70MM
8680628123057
Ortovia Shanz Screw 35mm Thread (S.Steel) Ø4X80MM
8680628124405
Ortovia Shanz Screw 20mm Thread (Titanium) Ø3X50MM
8680628124412
Ortovia Shanz Screw 20mm Thread (Titanium) Ø3X60MM
8680628124429
Ortovia Shanz Screw 20mm Thread (Titanium) Ø3X70MM
8680628123736
Ortovia Shanz Screw 35mm Thread (Titanium) Ø3X70MM
8680628123743
Ortovia Shanz Screw 35mm Thread (Titanium) Ø4X70MM
8680628123750
Ortovia Shanz Screw 35mm Thread (Titanium) Ø4X80MM
Headquarter & Sales:
Metroport Busidence No :143, E5 Üzeri Kültür
Sokak No: 1, 34180 Bahcelievler / Istanbul
Tel: +90 212 442 50 00 Fax: +90 212 442 46 34
[email protected], [email protected]
www.spinamer.com
R00
Image
Image
R&D Department:
Yildiz Technical University
Davutpasa Campus, Technology Development Zone
B2 Block, No: 114, Esenler / Istanbul
Tel: +90 212 442 50 00 Fax: +90 212 442 46 34
E-mail: [email protected]
Design © 2013 ahmed helmy
Factory:
Sanayi Mah. 1715. Sok. No: 32
34538 Esenyurt / Istanbul
Tel: +90 212 44 16 444 Fax: +90 212 442 46 34
E-mail: [email protected]
Supported by kosgeb
www.kosgev.gov.tr
Printed by Erkam Yayın San. Mam. ve Bilgisayar Ürün İm. Tic. A.Ş. 20.12.2013
Ortovia android
External Lengthening System
Software
Control
Remote
Access
Internet
Connection
Lengthening
Shortening
Precise
Mechatronic
Ortovia android Lengthening system designed to be used in lengthening and
shortening purpose of the limb is a rigid and precision mechatronic external
lengthening system. Ortovia app. is a spetial android-based software that authrized orthopedic surgeon can program and operate the system with remote access via the Internet.
On this system Ortovia.app is installed in patient’s mobile phone, the doctor by
his mobile phone or PC can reach the relevant patient’s lengthening system and
obtain information about the current situation, and also he can reprogram the
lengthening or shortening process.
Indications:
• lengthening and shortening process in long bones
Contraindications:
•In case the patient does not have enough psychological and intellectual abilities
to sustain the operation and postoperative treatment .
• Other known contraindications of limb lengthening process.
www.spinamer.com
Specifications
Reference No.
Description
100.8030
Ortovia L30 android fixator
100.8025
Ortovia L25 android fixator
100.8020
Ortovia L20 android fixator
100.8125
Ortovia LS25 android fixator
100.8120
Ortovia LS20 android fixator
100.8225
Ortovia LR25 android fixator
100.8220
Ortovia LR20 android fixator
100.8320
Ortovia LRS20 android fixator
100.4110
ORTOVIA SLYDING CLAMP
100.4111
ORTOVIA SLYDING CLAMP 1/2
100.4112
100.4113
ORTOVIA METAPHYSIS CLAMP
ORTOVIA POLYCLAMP
100.8800
100.8900
Electronic Control Unit
Ortovia app. Software
Headquarter & Sales:
Metroport Busidence No :143, E5 Üzeri Kültür
Sokak No: 1, 34180 Bahcelievler / Istanbul
Tel: +90 212 442 50 00 Fax: +90 212 442 46 34
[email protected], [email protected]
www.spinamer.com
R00
Image
R&D Department:
Yildiz Technical University
Davutpasa Campus, Technology Development Zone
B2 Block, No: 114, Esenler / Istanbul
Tel: +90 212 442 50 00 Fax: +90 212 442 46 34
E-mail: [email protected]
Design © 2013 ahmed helmy
Factory:
Sanayi Mah. 1715. Sok. No: 32
34538 Esenyurt / Istanbul
Tel: +90 212 44 16 444 Fax: +90 212 442 46 34
E-mail: [email protected]
Supported by kosgeb
www.kosgev.gov.tr
Printed by Erkam Yayın San. Mam. ve Bilgisayar Ürün İm. Tic. A.Ş. 20.12.2013