Prof. Dr. Cevdet GÖLOĞLU Address Industrial Design Engineering

Prof. Dr. Cevdet GÖLOĞLU Address Industrial Design Engineering

Prof. Dr. Cevdet GÖLOĞLU
Address Industrial Design Engineering, Faculty of Technology, Karabuk University,
Iron and Steel Campus, 78050 Karabuk Turkey
Office
Z10-B
Phone
Fax
+90 370 433 82 00 (Ext. 1043)
+90 370 433 32 90
E-mail
[email protected]
Areas of
Interest
Machine Design and Building, Optimization, Industrial Design, Die and Mold Design,
Manufacturing Processes, CAD/CAM, Micro Manufacturing, Machine Tools, AI
Applications in Design and Manufacturing. DOE Methods.
Academic and Prof. Dr., Faculty of Technology, Industrial Design Engineering, Karabuk University,
Work History 2010 – present.
Assoc. Prof. Dr., Faculty of Engineering, Mechanical Engineering, Karabuk University,
2010 - 2016
Asst. Prof. Dr., Faculty of Engineering, Mechanical Engineering, Karabuk University,
2009 - 2010
Asst. Prof. Dr., Faculty of Technical Education, Karabuk University, 2007 - 2009
Asst. Prof. Dr., Faculty of Technical Education, Zonguldak Karaelmas University,
1999-2007
Research Assistant PhD, Faculty of Technical Education, Zonguldak Karaelmas
University, 1999 - 1999
Research Assistant, Faculty of Technical Education, Zonguldak Karaelmas University,
1994 - 1999
Research Assistant, Faculty of Technical Education, Gazi University, 1991 – 1993
Administrative
1.
Experience







Member of University Senate, Karabuk University, 2011-2015
Director, Iron and Steel Institute, Karabuk University, 2011-2015
Member of Faculty Board, Karabük University, Faculty of Science, 2011-2012
Member of Faculty Administration Board, Karabük University, Faculty of Science,
2011-1012
Research and Implementation Centre of Occupational Safety and Health, Vice
Director, 2010-2013
ECTS/DS Coordinator, Karabuk University, 2008-2012
Erasmus Departmental Coordinator, Karabuk University, 2005-2009



Member of Faculty Board, Zonguldak Karaelmas University, Faculty of Technical
Education, 2000-2004
Head of Department, Zonguldak Karaelmas University, Faculty of Technical
Education, Electric and Electronics Edu. Dept., 2000-2004
Vice Head of Department, Zonguldak Karaelmas University, Faculty of Technical
Education, Mechanical Edu. Dept., 1999-2000
Education
PhD.
MSc.
BSc.
Mechanical Engineering, Cardiff University, Wales - UK, 1999
Institute of Natural and Applied Sciences, Gazi University, 1994
Department Mechanical Edu. Gazi University, 1988
Theses
PhD.
MSc.
Feature-Based Process Planning For Concurrent Engineering
Computer Aided Sheet Metal Die Design
Publications
Books and Book Chapters
 C. Göloğlu, Design for Engineers, An Industrial Approach, Karabuk, April 2015.
 Göloğlu, C. and Öztürk, A., Pro/Engineer Wildfire 2.0 - Design, Analysis,
Manufacturing, Seçkin Publishing, Ankara, ISBN 975 347 938 7, 643 pages, 2005.
 Göloğlu, C. and Öztürk, A., Pro/Engineer Wildfire - Design, Analysis,
Manufacturing, Seçkin Publishing, Ankara, ISBN 975 347 850 2, 558 pages, 2004.
Journal Articles
 Gök, A., Göloğlu, C., Demirci, H.İ., Determination Of Form Defects Depending On
Tool Deflection In Ball End Milling Of Convex And Concave Surfaces, Journal of the
Faculty of Engineering and Architecture of Gazi University, Vol 29, No 2, 365-374,
(2014).
 Gok, A., Gologlu, C., Demirci, H.I., Cutting parameter and tool path style effects
on cutting force and tool deflection in machining of convex and concave inclined
surfaces, Int J Adv Manuf Technol. (2013), DOI 10.1007/s00170-013-5075-x.
 Gok, A., Gologlu, C., Demirci, H.İ., Kurt, M., "Determination of Surface Qualities
on Inclined Surface Machining with Acoustic Sound Pressure", Strojniški vestnik Journal of Mechanical Engineering, 58(10), 587-597, (2012), DOI:10.5545/svjme.2012.352.
 Gologlu, C., Mizrak, C., "An Integrated Fuzzy Logic Approach to Customer
Oriented Product Design", Journal of Engineering Design, 22(2) pp 113-127,
(2011).
 Göloğlu, C., Mizrak, C., "Customer Driven Product Determination with Fuzzy Logic
and Taguchi Approaches", Journal of The Faculty of Engineering and Architecture
of Gazi University, Vol 25, No 1, 9-19, (2010).
 Göloğlu, C., Arslan, Y., "Zigzag Machining Surface Roughness Modelling Using
Evolutionary Approach", Journal of Intelligent Manufacturing, 20(2), 203-210
(2009).
 Gologlu, C., Zeyveli, M., "A Genetic Approach to Automate Preliminary Design of
Gear Drives", Computers & Industrial Engineering, 57, 1043-1051, (2009).
 Gologlu, C., Sakarya, N., "The Effects of Cutter Path Strategies on Surface
Roughness of Pocket Milling of 1.2738 Steel Based on Taguchi Method", Journal of
Materials Processing Technology, 206(1-3), 7-15 (2008).
 Gologlu, C., "Machine Capability and Fixturing Constraints-Imposed Automatic
Machining Set-Ups Generation", Journal of Materials Processing Technology,
148(1), 83-92 (2004).
 Gologlu, C., "A Constraint-Based Operation Sequencing for a Knowledge-Based
Process Planning", Journal of Intelligent Manufacturing, 15(4), 463-470 (2004).
 Pham, D.T. and Gologlu, C., "A Computer Aided Process Planning System for
Concurrent Engineering", Proc. Instn. Mech. Engrs., 215 Part B, 1117-1131
(2001).
















Atila, Ü., Karas, İ.R., Gologlu, C., Yaman, B. and Orak, İ.M., "An Idea for Finding
the Shortest Driving Time Using Genetic Algorithm Based Routing Approach on
Mobile Devices", International Journal Of Mathematics And Computers In
Simulation, 6(1), pp. 9-16, (2012).
Cevdet Göloğlu, A Research Center based on Industry/Academia Partnership,
Journal of Natural and Applied Science, Suleyman Demirel University, Vol. 17,
Special Issue, pp 19-23, 2013.
Metin Zeyveli, Hamit Saruhan, Cevdet Göloğlu, "Dişli Kutularında Parametrelerin
Hacim ve Mukavemete Etkilerinin Araştırılması", Erciyes Üniversitesi Fen Bilimleri
Enstitüsü Dergisi, 24(1-2), 315- 33, (2008).
Gologlu, C. "A Metaheuristic Based Self-Reasoning System for Assembly Sequence
Automation in CIM", Beykent University, Journal of Science and Technology, 2(1)
99-114, (2008).
Cevdet Göloğlu, Cengiz Çetin, "Kalite Evi Sihirbazı Geliştirme Ve Bir Endüstriyel
Uygulama", Teknoloji, K.B.Ü. Mühendislik Fakültesi Dergisi 11(4), 253-265,
(2008).
Göloğlu, C. ve Sezeroğlu, A., "Endüstriyel Ürün Geliştirmede Kalite Fonksiyon
Yayılımı Uygulaması", Teknoloji, Z.K.Ü. Karabük Teknik Eğitim Fakültesi Dergisi,
10(1), 49-59, (2007).
Bağlan, H.İ. ve Göloğlu, C., "Ürün Hayat Sürecinde Tasarım ve İmalata Eşzamanlı
Yaklaşım", Teknoloji, K.B.Ü. Teknik Eğitim Fakültesi Dergisi, 10(3), 189-201,
(2007).
Göloğlu, C., Aldemir, İ., Yılmaz, G., "Özgün Ürün Tasarımı ve İmalat Süreç
Planlaması", Teknoloji, Z.K.Ü. Karabük Teknik Eğitim Fakültesi Dergisi, 9(4), 251259, (2006).
Sakarya, N. ve Göloğlu, C., "Taguchi Yöntemi ile Cep İşlemede Kullanılan Takım
Yolu Hareketlerinin ve Kesme Parametrelerinin Yüzey Pürüzlülüğüne Etkilerinin
Belirlenmesi", Gazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi, 21(4),
603-612, (2006).
Göloğlu, C. ve Arslan, Y., "Genetik Programlama ile İmalat için Yüzey Pürüzlülük
Modeli Geliştirilmesi", Gazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi,
21(4), 667-674, (2006).
Göloğlu, C., Bunarbaşı, İ., "Üç Eksenli Doğrusal Hareket Mekanizması Tasarımı ve
İmalatı", Teknoloji, Z.K.Ü. Karabük Teknik Eğitim Fakültesi Dergisi, 7(3), 507-515,
(2004).
Pamukoğlu, U., Göloğlu, C., "Delik İşlemleri İçin Maliyet Merkezli Bir Sistem",
Pamukkale Üniversitesi, Mühendislik Bilimleri Dergisi, 10(1), 31-39, (2004).
Yıldız, A., Göloğlu, C., Şeker, U., "Tolerans Teknikleri ve Tolerans Analizi Yapılan
Çalışmaların Değerlendirilmesi", Gazi Üniversitesi, Teknik Eğitim Fakültesi,
Politeknik Dergisi, 4(4), 81-94, (2001).
Göloğlu, C., "Knowledge-Based Process Planning under the Concept of Concurrent
Engineering", Teknoloji, Z.K.Ü. Karabük Teknik Eğitim Fakültesi Dergisi, 3(2-3),
135-149, (2000).
Göloğlu, C., "Concurrent Product Realisation for Feature-Based Process Plans",
Teknoloji, Z.K.Ü. Karabük Teknik Eğitim Fakültesi Dergisi, 3(4), 165-175, (2000).
Conference Proceedings
 Göloğlu, C., Akbaş, E.Ö., Investigation of 3D Printer Process Parameters
Effects on Functional Products Strength, International Symposium on 3D
Printing Technologies (3D-PTS2016), 5-7 May 2016, Istanbul, 197-203.
 Göloğlu, C., Meral, T., Theoretical Investigation of Parameter Effects in Deep
Drawing Process for Complex Features, International Conference on Material
Science and Technology in Cappadocia (IMSTEC’16), April 6-8, 2016,
Nevsehir, Turkey, 581-586.
 Göloğlu, C., Bulut, C., Incremental Forming of Inclined Surfaces for AA 5754,
International Conference on Material Science and Technology in Cappadocia
(IMSTEC’16), April 6-8, 2016, Nevsehir, Turkey, 936-938.
 Öztürk, Z., Göloğlu, C., Investigation of Effective Parameters and Modelling
Techniques in Micromachining, Proceedings of 2nd International Iron and Steel
Symposium (IISS’15), 1-3 April 2015, Karabük, Türkiye, 412-417, 2015.
 Yaşar, N., Göloğlu, C., Sustainable Machining: Optimization of Energy
Consumption in Machining of AISI 40CrMnMoS86, Proceedings of 2nd
















International Iron and Steel Symposium (IISS’15), 1-3 April 2015, Karabük,
Türkiye, 404-407, 2015.
Cevdet GÖLOĞLU, İclal KURT, Ahmet Fırat AKYAZ, Aşkın KİRENLİ, Design and
manufacture of a medical support unit for rehabilitation of leg joints and muscles,
The First International Symposium on Industrial Design Engineering, Karabuk
University, 8-9th May 2014, Karabuk, pp. 217-220.
Cevdet GÖLOĞLU, Bünyamin SAĞIR, Fatih UZUN, Kamil CAN, Musa KANKAL,
Mehmet Salih BATMAZ, Design and manufacturing of self-balanced vehicle, The
First International Symposium on Industrial Design Engineering, Karabuk
University, 8-9th May 2014, Karabuk, pp. 206-209.
Cevdet GÖLOĞLU, Hakan MADEN, Ömer Şaban KAMBER, Design analysis and
mould design of housing cover product, The First International Symposium on
Industrial Design Engineering, Karabuk University, 8-9th May 2014, Karabuk, pp.
178-183.
Cevdet GÖLOĞLU, İbrahim ÖZYİĞİT, Systematic design of coach ceiling ventilation
and lighting unit, The First International Symposium on Industrial Design
Engineering, Karabuk University, 8-9th May 2014, Karabuk, pp. 159-163.
Cevdet GÖLOĞLU, Beytullah AYDOĞAN, A product development process by using
quality function deployment (QFD), The First International Symposium on
Industrial Design Engineering, Karabuk University, 8-9th May 2014, Karabuk, pp.
153-158.
Cevdet GÖLOĞLU, Hakan MADEN, Design improvement for prevention of problems
on the contactors used in low voltage transmitting, The First International
Symposium on Industrial Design Engineering, Karabuk University, 8-9th May
2014, Karabuk, pp. 147-152.
Ö. Erkan, C. Göloğlu, Farklı Eklem Tiplerine Sahip Paralel Kinematik Takım
Tezgahlarının Kuvvet ve Titreşim Analizlerinin Hassasiyet Açısından
Değerlendirilmesi, 7th International Advanced Technologies Symposium (IATS’13),
30 October-1 November 2013, Istanbul, Turkey, pp. 793-798.
Ö. Erkan, C. Göloğlu, Stewart Platformu Tabanlı Paralel Kinematik Takım Tezgahı
İçin Kinematik ve Çalışma Uzayı Analizi, 7th International Advanced Technologies
Symposium (IATS’13), 30 October-1 November 2013, Istanbul, Turkey, pp. 799802.
B. Aydoğan, C.Göloğlu, 2B Resimden Geometrik Bilgi Edinme ve Tersine
Mühendislikte Tasarım ve İmalat Uygulaması, 7th International Advanced
Technologies Symposium (IATS’13), 30 October-1 November 2013, Istanbul,
Turkey, 672-677.
E. Yücel, C. Göloğlu, Raylı Sistemlerde Tekerlek Ray Çifti Arasındaki Temas
Modellerinin Değerlendirilmesi, 7th International Advanced Technologies
Symposium (IATS’13), 30 October-1 November 2013, Istanbul, Turkey, pp. 137141.
A. Gök, H.I.Demirci, C.Göloğlu, B. Bakır, Dışbükey Yüzeylerin Küresel Parmak
Frezelenmesinde Takım Sehiminin Deneysel ve Nümerik Araştırılması, 7th
International Advanced Technologies Symposium (IATS’13), 30 October-1
November 2013, Istanbul, Turkey, pp. 756-760.
Samancioğlu, A., Yürüsoy, M., Meyveci, A. ve Göloğlu, C., Effects Of Cutting
Parameters On Cutting Tool Displacement And Surface Roughness In Micro Milling
Of AISI1045, International Iron & Steel Symposium, 02-04 April 2012, Karabük,
Türkiye, pp. 1026-1031.
Gök, A., Göloğlu, C., Demirci, H.İ., Effects of Different Cutting Styles on End
Milling of DIN 1.2344 Steel, International Iron & Steel Symposium, 02-04 April,
Karabük, Turkey, pp. 951-957, 2012.
Ortakcı, Y., Göloğlu C., Comparison of M-FPSO and C-FPSO Hybrid Methods in
Clustering, FUZZYSS'11 The Second International Fuzzy Systems Symposium,
Hacettepe University, November 17-18, pp. 7-10, (2011).
Gök, A., Bakır, B., Demirci, H.İ., Göloğlu, C., Dynamic Deflection Measurement
with Inductive Sensors in Milling Operations, 6th International Advanced
Technologies Symposium (IATS’11), 16-18 May, Elazığ, Turkey, pp. 160-165,
2011.
Göloğlu, C. Zurnacı, E., An Application on Kansei Engineering, 6th International
Advanced Technologies Symposium (IATS’11), 16-18 May, Elazığ, Turkey, pp.
166-170, 2011.

















Atila, U., Karas, I.R., Gologlu, C., Yaman, B., Orak, I.M., Design of a Route
Guidance System with Shortest Driving Time Based on Genetic Algorithm,
Proceedings of the 10th WSEAS International Conference on Applied
Computational Science, (ACAOS’11), Venice, Italy March 8-10, pp. 61-66, 2011.
Ayyıldız, M. ve Göloğlu, C., "Hasarlı Kalıp Elemanlarının Onarılması Amaçlı Tersine
Mühendislik Destekli Bir Çerçeve Çalışması", 5th International Advanced
Technologies Symposium (IATS'09), May 13-15, 2009, Karabuk, Turkey, 14341438.
Gök, M. ve Göloğlu, C., "Genetik Algoritma Kullanılarak Maliyet Tabanlı Bilgisayar
Kongifürasyonu Belirleme", 5th International Advanced Technologies Symposium
(IATS'09), May 13-15, 2009, Karabuk, Turkey, 72-76.
Yüksel, S. ve Göloğlu, C., "Metal Enjeksiyon Kalıplamada Yolluk Tasarı
Sistematiği", 5th International Advanced Technologies Symposium (IATS'09), May
13-15, 2009, Karabuk, Turkey, 1439-1443.
Yapıcı, F. and Göloğlu, C., "Prediction of Thickness Swelling and Weight Increase
on Heat Treated Black Pine (Pinus Nigra) Wood by Fuzzy Logic Classifier", 1st
International Fuzzy Systems Symposium (FUZZYSS'09), Ankara, Turkey, October
1-2, 81-85, 2009.
Göloğlu, C. and Mızrak, C., "Customer Involved Fuzzy Product Assembly
Visualization", 1st International Fuzzy Systems Symposium (FUZZYSS'09),
Ankara, Turkey, October 1-2, 93-98, 2009.
Göloğlu, C., Bulut, C., "Sac Metal Şekillendirme Pozitif Artışlı Şekillendirme
Uygulaması İçin Bir Teorik Çalışma", Proceedings of 12th International Materials
Symposium (IMPS'2008), 1068-1075, October 15-17, Denizli, Türkiye, 2008.
Cevdet Göloğlu, Cihan Mızrak, "Fuzzy Modular Product Assembly Based On
Customer's Needs", IMS'2008, 6th International Symposium on Intelligent and
Manufacturing Systems, Features, Strategies and Innovation, Sakarya, Turkey,
October 14-6, 386-394, 2008.
Cevdet Göloğlu, Cevdet Bulut, "Forming of AA5754 Rectangular Cup through
Incremental Forming Process", IMS'2008, 6th International Symposium on
Intelligent and Manufacturing Systems, Features, Strategies and Innovation,
Sakarya, Turkey, October 14-16, 376-385, 2008.
Zeyveli, M., and Göloğlu, C., "Design Optimisation of Two Stage Gearbox with
Helical Gears", IMS'2006 5th International Symposium on Intelligent
Manufacturing Systems, Agents and Virtual Worlds, 724-733, Sakarya, Turkey,
May 29-31, 2006.
Göloğlu, C. and Arslan, Y., "Zigzag Machining Surface Roughness Modelling Using
Evolutionary Approach", IMS'2006 5th International Symposium on Intelligent
Manufacturing Systems, Agents and Virtual Worlds, 734-742, Sakarya, Turkey,
May 29-31, 2006. (Makale sempozyum bilim kurulu tarafından Journal of
Intelligent Manufacturing dergisinde yayınlanması için seçilmiş, eklemeler
yapılarak ve genişleterek ilgili dergide yayınlanmıştır.)
Zeyveli, M., Göloğlu, C., Dündar, K., "Düz Dişli Hız Kutusunun Genetik Algoritma
İle En İyilenmesi", 4th International Advanced Technologies Symposium, 613-618,
Konya, Türkiye, September 28-30, 2005.
Göloğlu, C., "Ürün Tasarım Sürecinde Eşzamanlılık ve bir İmalat için Tasarım
Sistemi", 4th International Advanced Technologies Symposium, 591-596, Konya,
Türkiye, September 28-30, 2005.
Erkaymaz, H. ve Göloğlu, C., "Mekanik Sistemlerde Doğrusal Hareketin Bulanık
Mantık ile Denetimi", 4th International Advanced Technologies Symposium, 745749, Konya, Türkiye, September 28-30, 2005.
Göloğlu, C., "Intelligent Short Path Planning For Assembly Sequence Automation
In CIM", IMS'2004: 4th International Symposium On Intelligent Manufacturing
Systems, 290-297, July 6-8, 2004.
Göloğlu, C., "A Constraint Based Operation Sequencing for a Knowledge-Based
Process Planning", IMS'2001: Vision for the Future, 3rd International Symposium
on Intelligent Manufacturing Systems, August 30-31, 2001. (Makale sempozyum
bilim kurulu tarafından Journal of Intelligent Manufacturing dergisinde
yayınlanması için seçilmiş ve ilgili dergide yayınlanmıştır.)
Pham, D.T. and Gologlu, C., "Machining Set-up Planning Based on Evaluation of
Feature Relations and Fixturing Constraints", in: Adey, R.A., Rzevski, G., Teti, R.
(Editors), Applications of Artificial Intelligence in Engineering XII, Computational
Mechanics Publication, UK., 174-185, 1997.






Karyağdı, A., Göloğlu, C., Signalisation Requirement Of Irmak-Karabük-Zonguldak
Railway Route, 1st International Workshop on Railway Systems Engineering
(IWRSE’12), Karabük, Türkiye, 11-13 Ekim 2012.
Göloğlu, C., Research Centre in Industry/Academy Collaboration, Symposium of
Collaboration with Industry in Future's Engineering Education, Isparta, 2-3 Kasım
2012.
Göloğlu, C., Kadı, İ., Iron and Steel Institute and Iron and Steel Master's Degree,
Symposium of Collaboration with Industry in Future's Engineering Education,
Isparta, 2-3 Kasım 2012.
Cebeci, H., Göloğlu, C., "Kurumsal Kaynak Planlamasının Kardemir A.Ş.de
Uygulanması", Kuruluşundan Bugüne Karabük ve Demir Çelik Sempozyumu,
Karabük Üniversitesi, 1-3 Nisan 2010,
Cevdet Göloğlu, Engin Atabaş, Uğur Düzgün, "İnsansız Hava Aracı Tasarım
Uygulaması: KIRLANGIÇ-360A", Kayseri VII. Havacılık Sempozyumu, 83-87,
Kayseri, 15-16 Mayıs 2008.
Dizdar, E.N., Göloğlu, C., Özdemir, S., "Teknik Eğitim Atölyelerinde Kullanılan
Makinelerin Antropometrik İncelenmesi", 10. Ergonomi Kongresi (Uluslararası
Katılımlı), Uludağ Üniversitesi, 350-360, Bursa, 7-9 Ekim 2004.

Reviewer of













Mechanism and Machine Theory (SCI)
Journal of Materials Processing Technology (SCI)
Journal of Faculty of Engineering and Architecture of Gazi University (SCI)
Journal of Engineering Design (SCI)
International Journal of Systems Science (SCI)
IEEE Transactions on Control Systems Technology (SCI)
Computers and Industrial Engineering (SCI)
Karabük Üniversitesi, Teknoloji
Gazi Üniversitesi, Politeknik
Pamukkale Üniversitesi, Mühendislik Bilimleri Dergisi
Erciyes Üniversitesi, Fen Bilimleri Dergisi
Turkish Journal of Fuzzy Systems, TJFS
Jurnal of Engineering Science and Tecnology, JESTECH

Intelligent Short Path Planning for Transporting and Positioning Robots used in
Flexible Manufacturing Systems and Prototype Robot Manufacturing, Zonguldak
Karaelmas University, Scientific Research Project, 2001-38-02-33, Project
Manager, 2001.
Investigation of Karabuk Air Pollution, State Planning Organization Project,
98K123170, Project Researcher, 1999.
Determination of Machninability on ISO 4957 in Die Feature Machining, Karabuk
University, Scientific Research Project, KBÜ-BAP-C-11-D 004, Project Manager,
2011.

Involved
Projects



Awards



TUBITAK International Scientific Publication Promotion Program, Publication
Promotion Award (2001-2010)
23rd Edition 2006 "Marquis Who's Who in the World" index inclusion,
YOK (Higher Education Council of Turkey), YLS Doctorate Scholarship for Abroad
Membership1. Fuzzy Systems Association, 2007 - nowadays
2. 3rd April Science and Research Association, 1999 – present
Courses
Taught







Manufacturing Processes I-II
Machine Tools
Computer Aided Technical Drawing
Computer Aided Design
Computer Aided Manufacturing
Computer Aided Manufacturing Applications
Computer Integrated Manufacturing









Thesis
Supervision
Systematic Design
Artificial Intelligence Applications in Engineering
Intelligent Manufacturing Systems
Genetic Algorithms and Applications
Genetic Algorithms and Optimization
Micro and Nano Manufacturing Technologies
Sustainable Design and Manufacturing
Design and Manufacturing Systems
Die and Mold Design and Manufacturing
MSc.












Pamukoğlu, Uğur, Development of a knowledge -based system for cost oriented
hole making process, Zonguldak Karaelmas University, Institute of Natural and
Applied Sciences, 2003.
Bunarbaşı, İrfan, Modelling of linear movement mechanisms for robot and
machine tools and prototype production, Zonguldak Karaelmas University,
Institute of Natural and Applied Sciences, 2004.
Erkaymaz, Hande, Linear movement control by fuzzy logic in mechanical systems,
Zonguldak Karaelmas University, Institute of Natural and Applied Sciences, 2004.
Sakarya, Nazım, An investigation of cutter path strategies and cutting parameters
effects on surface roughness in pocket milling, Zonguldak Karaelmas University,
Institute of Natural and Applied Sciences, 2005.
Arslan, Yenal, Genetic programming approach for inverse problem
implemantations in enginering, Zonguldak Karaelmas University, Institute of
Natural and Applied Sciences, 2005.
Bağlan, Halil İbrahim, A concurrent approach in designing and prepretation to
manufacturing of a product for its life cycle, Zonguldak Karaelmas University,
Institute of Natural and Applied Sciences, 2007.
Cevdet Bulut, AA 5754 sheet shaping by incremental forming and theoretical
modeling, Karabuk University, Institute of Natural and Applied Sciences, 2008.
Cihan Mızrak, Customer tailored product development via fuzzy logic, Karabük
University, Graduate School of Natural and Applied Sciences, 2009.
Mustafa Ayyıldız, Renewing of damaged machine components via reverse
engineering for design and manufacturing, Karabük University, Graduate School of
Natural and Applied Sciences, 2009.
Harun Cebeci, "Implementation Of Enterprise Requirement Planning And User
Perception: Kardemir A.Ş. Example", Karabük University, Graduate School of
Natural and Applied Sciences, 2011.
Erman Zurnacı, "Development of Product Design Systematics Based on Kansei
Engineering", Karabük University, Graduate School of Natural & Applied Sciences,
2011.
Yasin Ortakcı, "Comparison of Particle Swarm Optimization Methods in
Applications", Karabük University, Graduate School of Natural & Applied Sciences,
2011.
PhD.
 Arif Gök, "Investigation of Machinability of ISO 4957 in Mould Features'
Machining", Karabük University, Graduate School of Natural and Applied Sciences,
Co-supervisor, 2013.
 Ömer Erkan, "Micro Machining Machine Tool Design - Manufacture and Its
Performance Evaluation", Karabük University, Graduate School of Natural and
Applied Sciences (continues).
 Metin Zeyveli, Gearbox wheels design by genetic algorithm, Gazi University,
Institute of Natural and Applied Sciences, Co-supervisor, 2005.