Plenary Lecture

Thursday, October 21
Room
Chair
8:30-9:20
9:20-9:30
Room
Chair
Ballroom A
Yusuf Menceloglu
Plenary Lecture:
Rubber Elasticity: From Theory to Applications, Burak Erman, Koc University, Istanbul
Ballroom B
Akdeniz 1
S09- Green Polymers,
Reprocessing and Recycling,
Biobased Polymers
S03- Mixing &
Compounding / Reactive
Processing Blends and
Alloys
Break to change Rooms
Akdeniz 2
S04 - Films and Fibers
Yusuf Menceloglu
Ballroom A
Akdeniz 3
S11-Nanocomposites and
Functional Fillers
S06- Rheology and
Flow Analysis
Ulku Yilmazer
9:30-9:50
S03-9 Oxygen Gas
S06-61 Experimental and
S04-20 Structure and
Permeability and
S11-60 Polyurethane/carbon Numerical investigation
Performance of
Processability of
nanotube composites using of the coating process of
Polyolefin/PAPoly(ethylene terephthalate)
melt-transcription
block copolymers as
nanocomposite/Polyolefin
Films Blended with Poly(mmolding process –
dispersing agents - ManasMultilayer Films – Ajji
Zloczower Ica, Loos Marcio
xylene adipamide) – Ozen
Kawaguchi Tatsuya,
Abdellah, Sadeghi
Ilhan, Menceloglu Yusuf
R., Feke Donald L.
Saito Takushi, Satoh
Farhad
Ziya, Cakmak Mukerrem
Isao
9:50-10:10
S03-197 Novel
bitumen/reactive polymer
formulations for the Road
paving and roofing
applications - Sanatkaran
Neda, Dabir Bahram,
Nazokdast Hossein
S04-145 Glassy skin
formation on porous
electrospun polystyrene
fibers - Demir Mustafa,
Çelik Mesut
10:10-10:30
S11-77 Fabrication and
S06-208 Rheology of
characterization of hybrid
toothpaste: a semi-solid,
organic-inorganic
yield stress, thixotropic
nanocomposites using natural
material—Ardakani
rubber, montmorillonite and
Hesam Anvari, Evan
chitosan -Manoel Anderson
Mitsoulis, Hatzikiriakos
Felix, Martins Maria Alice,
Savvas G.
Ferreira Mariselma
Coffee Break
S09-50 Foams based on microand nano-composite
polycaprolactone: foaming
process and mechanical
10:30-10:50
properties – Sorrentino Luigi,
Gargiulo Marcella, Iannace
Salvatore, Karakus Kadir,
Mengeloglu Fatih
S04-28 Analysis of
Deformation Behavior
during Stretching of
S06-31 CrystalloPolytetrafluoroethylene
rheologically simple
(PTFE) Films
fluids: a new approach in
accompanied with Pore
polymer characterization
Formation – Yamada
– Van Puyvelde Peter,
Toshiro, Yoshida Keisuke,
Janssens Vincent, Van
Umeda Yu-uki,
Assche Guy, Van Mele
Yamaguchi Hideaki,
Bruno
Aizawa Seiji, Sanami
Akira, YOKOHAMA
Invited Talk: Polymer/Carbon
Atsushi
Nanotube Composites:
Expanding the Materials
Property Map,
Satish
Kumar
S03-187 Investigation of
Thermal Behavior and
Decomposition Kinetic of
PET/PEN Blends –
Mohammadi Seyedeh
Raziyeh, Khonakdar
Hossein Ali, Ehasani
Morteza, Jafari Seyed
Hassan
S06-65 PEO and Ramie
whiskers based
nanocomposites.
Influence of processing:
extrusion and castingevaporation – El Kissi
Nadia, Alloin Fannie,
Dufresne Alain, Bossard
Frédéric, D Aprea
Alessandra
S09-88 Physicomechanical and
Biodegradation Properties of
LDPE/Starch Nanocomposites
10:50-11:10
Prepared via Twin Screw
Extruder –Inceoglu Funda,
Menceloglu Yusuf Ziya
S01- Injection Molding / Blow
Molding / Rotational Molding
11:10-11:30
11:30-11:50
11:50-12:10
S07-Morphology, Structure
Development and
Properties
S06-196 Velocimetry of
S07-99 Effect of modified
a metallocene linear lowMontmorillonite on the
density polyethylene
morphology and mechanical
during extrusion in a
properties of
capillary die - Pérezpoly(ethyleneterephtalate)/po
González José,
lyolefins blends - Role of the
Rodríguez-González
surfactant – Soulestin
Invited Talk: Influence of
Francisco, Vargas
Jérémie, Dropsit-Leprêtre Hydrogen Bonding, Chain
Lourdes de, MarínInvited Talk: Analysis and
Sophie, Vergnes Bruno
Symmetry and Soft
Santibáñez
Benjamín M.
Simulation of Crystallinity
Segment Entanglement on Invited Talk: Nanoparticle
Development in sPS Injection
Amphiphiles - Sanat Kumar
the Morphology and
Molded PartsProperties of Segmented
Giuseppe Titomanlio
Elastomers - Iskender
Yilgor
S07-22 Real-time monitoring
of polymer structure
S06-165 The Rheological
development under
Properties of Polymeric
processing-like cooling
Non-Newtonian Fluids –
conditions - Cavallo Dario,
Özel Burcu, Yıldız
Alfonso Giovanni Carlo,
Mehmet, Mencelo lu
Azzurri Fiorenza, Balzano
Yusuf Ziya
Luigi, Peters Gerrit W.,
Portale Giuseppe
S01-3 Effects of Injection
Molding Conditions on
Residual Stresses in Injection
Molded Amorphes and SemiCrystalline Flat Plates:
Simulation and Experiments –
Katmer Sükran, Karatas
Cetin, Ünal Halil brahim
S01-32 Water Assisted
Injection Molding (WAIM): A
Study on the Influence of Melt,
Mold and Process Parameters
12:10-12:30 on the Product Quality of WaterAssisted Injection Molded
Tubes - Sannen S.,
Versleegers J., De Keyzer J.,
Naelaerts L., Van Puyvelde P.
S11-98 Influence of the
S06-171 The Effects Of
dispersion degree on the inS05-59 Vulcanization rate
Process Conditions On
use properties of polyamide 6
dependence of the thermal
Dispersion Quality And
nanocomposites films
conductivity of rubber –
The Properties Of Water
–Soulestin Jérémie, Baralu
CHEHEB zied
Based Paint - Deniz Veli,
Rashmi, Bourbigot Serge,
Bekircan Elif Asude
Krawczak Patricia
Invited Talk: Model
Experiments to Understand
and Model Structure
Development in Polymer
Processing- Severine Boyer
12:30-14:00
Room
Chair
Dilhan Kalyon
14:00-14:50
14:50-15:00
Room
Chair
S05- Elastomers and
Elastomer Processing
S05-11 Effects of polymer
S11-66 Biofilm formation on
viscoelasticity on dynamicS06-151 Process
silicone nanocomposites
mechanical properties of
Monitoring of Resin
containing various
cured elastomer
Transfer Molded
antimicrobial agents –
compounds – Coppola
Composite Structures by
Atarijabarzadeh Sevil,
Salvatore, Bacchelli
Fiber Optic Sensors
Stromberg Emma, Karlsson
Fabio, Vitalini Sacconi
–Yildiz Mehmet
Sigbritt
Luca
Lunch
Ballroom A
Plenary Lecture:
Reactive Organoboron Polymers, Yoshiko Chujo, Kyoto University, Japan
Ballroom B
Akdeniz 1
Break to change Rooms
Akdeniz 2
S01- Injection Molding / Blow
Molding / Rotational Molding
S06- Rheology and Flow
Analysis
Dilhan Kalyon
Kazim Acatay
Ballroom A
S12- Functional
Polymers / Organic
Electronics
Phil Coates
S11-146 Smart PolyolefineLDH-Nanocomposites:
Interdependency of filler
preparation and
nanocomposite exfoliation
–Kutlu Burak, Leuteritz
Andreas, Wagenknecht Udo,
Heinrich Gert
15:00-15-20
Invited Talk: Polymer
Processing by Pressure, Metin
Acar
S11-51 Cell Structure,
Mechanical and Thermal
Properties of
Polyethylene/Clay
Nanocomposite Foams –Seraji
Mohsen, Razavi Aghjeh Mir
Karim, Davari Mehdi
15:20-15:40
15:40-16:00
S01-154 Excellent processing
of engineering plastics –
Bernnat Anka
S07-164 Pressure Influences
on the Kinetics of Polymer
Crystallization - Eder
Gerhard, Hierzenberger
Peter, Amorim Paulo
Akdeniz 3
Iskender Yilgor
Invited Talk: One
polymer for all:
Benzotriazole Containing
Donor-Acceptor Type
Polymer as a MultiPurpose Material,
Levent Toppare
S04-203 Transparent
Flexible/Deformable
Electrically Conductive
Film Manufacturing With
A Novel Hybrid
Casting/Electrospinning
Process – Cakmak
Mukerrem, Zhao Wei,
Yalcin Baris
S06-123 In-line
rheophotometry during
polymer extrusion Canevarolo Sebastião ,
Soares Kinglston
Invited Talk: Impact
Modified Polymer-Organoclay
Nanocomposites - Ulku
Yilmazer
S06-35 Application of
Rheological Analysis in
S07-12 Interfacial properties S01-138 Surface Replication
Characterization of the
crystallization kinetics and Its Structure Development
Morphology of Clay
16:00-16:20
morphologies’ relationship in
in Ultrasonic Micro-Injection
Filled PE/EVA Blend
PET/polyolefins systems Molding – Ito Hiroshi
Nanocomposites - Razavi
BOYER Séverine A.E
Aghjeh Mir Karim,
Mehravaran Arezoo
S07-19 PolarizationSensitive Optical Coherence
Tomography as a Novel Tool
S01-102 Micro-blow molding:
for Observing Shear-induced
16:20-16:40 Designing of an angioplasty
Crystallization balloon - Daver Fugen
Hierzenberger Peter, Eder
Gerhard, Leiss-Holzinger
Elisabeth, Stifter David
S07-22 Morphology
development of
S01-121 Speeding-Up Strategy
polytetrafluoroethylene in a
For The Rotational Foam
16:40-17:00
Molding Process - Pop-Iliev polypropylene melt – Md Ali
Remon
Mohd Amran, Yamaguchi
Masayuki
Invited Talk: Ultrahigh
Density Array of
Nanopatterns on
Baroplastic Block
Copolymer Films by
Phase Transition at Room
Temperature - Jin Kon
Kim
S12-170 Structural
Studies on Oligomers for
Semiconductor
Applications - Bader
Mamoun, Pham
Phuong-Truc T.
S11-175 The Quantitative
S12-17 Wavelength
Analysis of Nano-clay
dispersion of
Dispersion in Polymer
birefringence for oriented
Nanocomposites by Smallcellulose esters angle X-ray Scattering
Yamaguchi Masayuki,
Manaf Mohd. Edderozey
Combined with Electron
A, Okada Kyoko,
Microscopy - Bandyopadhyay
Shiroyama Yasuhiko
Jayita Bandyopadhyay
S11-190 Preparation of
S12-186 Dynamic
Dynamically Vulcanized
covalent reorganization
Thermoplastic Elastomer
of polymer/polymer
Nanocomposite based on
systems: alcoholysis
PP/EPDM Using Twin Screw catalyst effect on kinetic
Extruder – Naderi Ghasem, and secondary reactions Khosrokhavar Ramin,
Becquart Frédéric, Taha
Mohamed, Touhtouh
Bakhshandeh Gholamreza,
Samira
Ghoreishy Mir Hamid Reza
17:00-17:20
S06-26 Determination of
Order-Disorder Transition
of “Baroplastic” PSPEHA-PS Triblock
Copolymer by Using
Rotational Rheometry Ozen Ilhan, Inceoglu
Sebnem, Acar Metin
Hayri, Menceloglu Yusuf
Ziya
17:20-17:40
S05-64 Baroplastics:
S11-52 Rheology and
Recyclability and
Morphology of ABS/Clay
Processing Aid Behaviour
Nanocomposites Prepared via
- Inceoglu Sebnem, Aytun
Melt Intercalation Method –
Taner, Bilal Ari S, Tuzer
Khanali Mohammad Hossein,
Atilay, Buyukaslan
Razavi Aghjeh Mir Karim,
Evrim, Ow-Yang Cleva W
Pourabbas Behzad
, Acar Metin H
18:00-24:00
Banquet
S11-27 Effect Of Oil Fly Ash
On The Mechanical Properties
Of Low-Density Polyethylene
– Khan Muhammad Jamal,
Hussein Ibnelwaleed Ali,
Shawabkeh Reyad Awwad, AlJuhani Abdulhadi A.