building insulation

ODE MEMBRAN
BUILDING INSULATION
TS 11758-1
EN 13707
EN 13969
Polymer Bituminous
Waterproofing Membranes
ODE
MEMBRAN SERIES
Polymer modified bituminous membrane is a superior butimine which is obtained by processing bitume
and polymers at high temperatures (through APP or SBS) in order to ameliorate the physical properties
(transformation, softening and bending points, UV and fatigue) of bitumine.
ODE OPAL PREMIUM
(Cold flexibility value is -5°C)
ODE Opal series of waterproofing membranes incorporates the properties of APP modified bitumine. It is manufactured in
fiberglass and non-woven polyester felt carrier types. It provides affordable solutions for waterproofing details, especially for
terrace and groundwork applications.
TECHNICAL
SPECIFICATIONS
STANDARD
UNIT
OC 200
PRM
OC 300
PRM
OP 300
PRM
OP 400
PRM
-
-
Camtülü
Camtülü
Polyester
Polyester
Camtülü
Polyester
TS EN 1849-1
mm
2±0,02
3±0,02
3±0,02
4±0,02
3,5(3,5-3,9)
3,5(3,5-3,9)
Reinforcement
Thickness
OC 400 M
PRM
OP 400 M
PRM
Length
TS EN 1848-1
m
15±0,03
10±0,03
10±0,03
10±0,03
10±0,03
10±0,03
Width
TS EN 1848-1
m
1±0,02
1±0,02
1±0,02
1±0,02
1±0,02
1±0,02
Flow Resistance at Elevated Temperature
TS EN 1110
°C
≥ 110
≥ 110
≥ 110
≥ 110
≥ 110
≥ 110
Cold Flexibility
TS EN 1109
°C
≤ -5
≤ -5
≤ -5
≤ -5
≤ -5
Water Tightness
TS EN 1928
-
Successful
Successful
Peel Resistance
EN 12316-1
N/5cm
≥ 350
≥ 350
≥ 400
≥ 400
≥ 350
Shear Resistance
EN 12317-1
N/5cm
≥ 20
≥ 20
≥ 20
≥ 20
≥ 20
≥ 20
Tensile Strength(Long/Trans)
TS EN 12311-1
N/5cm
-
≥ 400/300
≥ 600/400
≥ 600/400
≥ 400/300
≥ 600/400
Elongation at break(Long/Trans)
TS EN 12311-1
%
≥ 2/2
≥ 2/2
Resistance to Tear (Long/Trans)
TS EN 12310-1
-
≥ 70/70
≥ 70/70
Reaction to Fire
TS EN 13501-1
-
E
E
E
E
E
E
-
15/1
10/1
10/1
10/1
10/1
10/1
Roll dimensions (Length/Width)
≥ 300/200
Successful
Successful
≥ 30/30
≥ 30/30
≥ 130/130
≥ 130/130
Successful
≤ -5
Successful
≥ 400
≥ 2/2
≥ 30/30
≥ 90/90
≥ 130/130
Quantity in Palette
-
30
30
30
20
20
20
Palette Dimesions
cm
100x120
100x120
100x120
95x115
95x115
95x115
Quantity in Palette
m2/palet
450
300
300
200
200
200
ODE GRANAT PREMIUM
(Cold flexibility value is -10°C)
ODE Garanat series of waterproofing membranes incorporates the properties of APP modified bitumine. It is manufactured
in fiberglass and non-woven polyester felt carrier types. It is used with high performance in all waterproofing insulation
details,especially for terrace and groundwork applications.
TECHNICAL
SPECIFICATIONS
Reinforcement
STANDARD UNIT
-
-
GC 200
PRM
GC 300
PRM
GP 300
PRM
GP 400
PRM
Camtülü
Camtülü
Polyester
Thickness
TS EN 1849-1
mm
2±0,02
3±0,02
3±0,02
Polyester
4±0,02
Length
TS EN 1848-1
m
15±0,03
10±0,03
10±0,03
10±0,03
Width
TS EN 1848-1
m
1±0,02
1±0,02
1±0,02
1±0,02
Flow Resistance at Elevated Temperature
TS EN 1110
°C
≥ 120
≥ 120
≥ 120
≥ 120
Cold Flexibility
TS EN 1109
°C
≤ -10
≤ -10
≤ -10
≤ -10
Water Tightness
TS EN 1928
-
Successful
Successful
Successful
Successful
Peel Resistance
EN 12316-1
N/5cm
≥ 350
≥ 350
≥ 400
≥ 400
Shear Resistance
EN 12317-1
N/5cm
≥ 20
≥ 20
≥ 20
≥ 20
≥ 400/300
≥ 400/300
≥ 800/600
≥ 800/600
Tensile Strength(Long/Trans)
TS EN 12311-1 N/5cm
-
Elongation at break(Long/Trans)
TS EN 12311-1
%
≥ 2/2
≥ 2/2
≥ 35/35
≥ 35/35
Resistance to Tear (Long/Trans)
TS EN 12310-1
-
≥ 70/70
≥ 90/90
≥ 150/150
≥ 150/150
Reaction to Fire
TS EN 13501-1
-
E
E
E
E
-
15/1
10/1
10/1
10/1
Roll dimensions (Length/Width)
Quantity in Palette
-
30
30
30
20
Palette Dimesions
cm
100x120
100x120
100x120
90x115
Quantity in Palette
m2/palet
450
300
300
200
ODE
MEMBRAN SERIES
ODE RUBİN PREMIUM
(Cold flexibility value is -20°C)
ODE Rubin series of waterproofing membrane incorporates the superior qualities such as ease of application of SBS modified bitumen
at low temperatures. It is manufactured in fiberglass and non-woven polyester felt carrier types.
TECHNICAL
SPECIFICATIONS
STANDARD UNIT
-
Reinforcement
TS EN 1849-1
Thickness
RC 200
PRM
RC 300
PRM
RP 300
PRM
Camtülü
Camtülü
Polyester
Polyester
Polyester
mm
2±0,02
3±0,02
3±0,02
4±0,02
3,5(3,5-3,9)
-
RP 400
PRM
RP 400 M
PRM
Length
TS EN 1848-1
m
15±0,03
10±0,03
10±0,03
10±0,03
10±0,03
Width
TS EN 1848-1
m
1±0,02
1±0,02
1±0,02
1±0,02
1±0,02
Flow Resistance at Elevated Temperature
TS EN 1110
°C
≥ 100
≥ 100
≥ 100
≥ 100
≥ 100
Cold Flexibility
TS EN 1109
°C
≤ -20
≤ -20
≤ -20
≤ -20
≤ -20
Water Tightness
TS EN 1928
-
Successful
Successful
Successful
Successful
Successful
Peel Resistance
EN 12316-1
N/5cm
≥ 350
≥ 350
≥ 400
≥ 400
≥ 400
Shear Resistance
EN 12317-1
N/5cm
≥ 20
≥ 20
≥ 20
≥ 20
≥ 20
Tensile Strength(Long/Trans)
TS EN 12311-1
N/5cm
-
≥ 400/300
≥ 400/300
≥ 800/600
≥ 800/600
≥ 800/600
Elongation at break(Long/Trans)
TS EN 12311-1
%
≥ 2/2
≥ 2/2
≥ 35/35
≥ 35/35
≥ 35/35
Resistance to Tear (Long/Trans)
TS EN 12310-1
-
≥ 90/90
≥ 90/90
≥ 150/150
≥ 150/150
≥ 150/150
Reaction to Fire
TS EN 13501-1
-
E
E
E
E
E
-
15/1
10/1
10/1
10/1
10/1
Roll dimensions (Length/Width)
Quantity in Palette
-
30
30
30
20
20
Palette Dimesions
cm
100x120
100x120
100x120
90x115
90x115
Quantity in Palette
m2/palet
450
300
300
200
200
CODE OF PRACTICE
• In order to procure a soft twist of the membranes in the
joint inter sections of all vertical and horizantal elements
and in the inter sections where the vertical elements change
direction, bevels of 45° graded and with the width of 8 x 8
cm. should be made.
• The surfaces where the waterproofing membrane shall
be implemented should be smooth, even and should be
preferentially polished with float, and should be cleaned from
any stain or residuals of oil, diesel oil etc. which can harm the
waterproofing.
• Reinforced concrete surfaces, should be undercoated
with Ode Bitumen Emulsion through cold application in
accordance with the standards, and 24 hours should pass
after the application in order for it to dry. Bitumen emulsion
will increase the adhesion by stabilizing the dust and similar
substances on the surface of adherence.
• All membrane layers should be opened in the same
direction. The transverse joint parts of the first layer of the
membranes should be laid in an obfuscatory manner. The
membranes should be applied by weatherboarding starting
from the water outlets.
• The longitudinal weatherboards of the insulation membrane
should be at least 10 cm and the transverse weatherboards
should be at least 15 cm.
• ODE membrane and the floor should be heated together.
In addition, fusion welding should be applied to the
weatherboards.
• When laying the second layer over the first one, the joint
parts of the first layer should be centered longitudinally and
transversely, and then heated and fully adhered .
• In the applications of mineral coated ODE membranes,
the membrane layers on the bottom and at the top at the
transverse weatherboard parts should be heated with a
welding torch and the joint should be adhered through of a
float which helps to embed the minerals into the membrane.
• In the wooden roof applications, in order to prevent the
wood from the affects of fire, the bituminous membrane
should be set on the wooden surfaces with wide tipped nails
and the ODE Membrane should be adhered by heating.
• If a previous application has to be renewed, the old
application can remain as the bottom layer. The damaged
areas and the blisters should be repaired. A coat (bitumen
emulsion/solution) should be absolutely applied.
SHIPPING DETAILS
Products
OC 200 PRM
OC 300 PRM
OP 300 PRM
OP 400 PRM
OC 400 M PRM
OP 400 M PRM
GC 200 PRM
GC 300 PRM
Truck (45m³)
(Quantity in
palette)
12
13
13
14
17
17
13
12
*Approximate numbers.
Truck (85m³)
(Quantity in
palette)
20
21
21
24
28
28
21
20
40 HC Container
(Quantity in palette)
18
19
19
21
26
26
19
18
Products
GP 300 PRM
GP 400 PRM
RC 200 PRM
RC 300 PRM
RP 300 PRM
RP 400 PRM
RP 400 M PRM
Truck (45m³)
(Quantity in
palette)
13
15
13
13
13
15
18
Truck (85m³)
(Quantity in
palette)
21
24
21
21
21
24
29
40 HC Container
(Quantity in palette)
19
22
19
19
19
22
26
About ODE:
All ODE products have CE certification.
Established in 1985, ODE is among the leading
insulation materials manufacturer, providing its
customers with high quality insulation solutions used
in building and technical (HVAC) insulation.
With its 4 modern production facilities spread over
120.000 m², ODE manufactures ODE MEMBRAN
- waterproofing membranes, ODE ISIPAN - XPS,
thermal insulation boards, ODE R-FLEX - elastomeric
rubber foam and ODE STARFLEX - glass wool
insulation materials. In addition to its well established
distribution network in Turkey, ODE also has a
widespread network of distribution abroad and
exports to 68 countries from Dubai to Uruguay and
from Canada to Ghana. The head quarter of ODE is
located in Istanbul and in 2013 ODE TORGOVLYA
was established in Moscow / Russia with a logistics
center in Rostov / Russia.
CE Certificate is the guarantee that the product
respects the environment and has been supplied to the
consumer in full compliance with the quality criteria
and standards. According to this product standard,
the manufacturing technologies should not harm the
environment or the ozone layer. According to EU
Construction Products Directive, the construction
materials should carry the CE marking. For ensuring
a sustainable future, all ODE products carry this
certificate.
ODE Yalıtım San. Tic. A.Ş.
A: Piyale Paşa Bulvarı Ortadoğu Plaza Kat:12
34384 Okmeydanı - Şişli / İstanbul / Türkiye
T: +90 212 210 49 06
F: +90 212 210 49 07
e-posta: [email protected]
www.ode.com.tr
ODE Torgovlya (ODE RUSSIA)
123317, Moscow, Testovskaya Street, Building 10,
Northern Tower, Enterance 2, Floor 3, Office 304
T: + 7 495 792 50 76
e-mail: [email protected]
www.ode.com.ru