Untitled - artofsound.com.tr

STOK KODU
ÜRÜN
ÜRÜN ÖZELLİKLERİ
RENK
BİRİM GRUP
FİYAT
Monitor Series
SMR1B
Monitor Reference
Bookshelf Speaker
SMR1W
SMR2B
Monitor Reference
2 Bookshelf
Speaker
SMR2W
SMR4B
SMR4W
Monitor Reference
4 Floor Standing
Speaker
SMR6B
Monitor Reference
6 Floor Standing
SMR6W
SMRCB
Monitor Reference
Centrer Home
Theather
SMRCW
SMRW10B
Monitor Reference
W10 Subwoofer
SMRW10W
Frequency Response: 55Hz - 30kHz
Sensitivity (1W@1M): 88 dB
Nominal Impedance: 6 ohms
Power Handling (RMS): 70 W
Recommended Amplifier (RMS): 15- 70W Bass
Alignment: Bass reflex. Rear ported. Drive Unit
Compliment: 1 x 5.5" MMP®II bass/mid-range 1 x 1" gold
dome C-CAM®
Dimensions (H x W x D) 26 x 16.5 x 18 cm
Frequency Response 42Hz - 30kHz
Sensitivity (1W@1M): 90 dB
Nominal Impedance: 6 ohms
Power Handling (RMS): 100 W
Recommended Amplifier (RMS): 30- 100W
Bass Alignment: Bass reflex. Front ported. Drive Unit
Compliment: 1 x 6.5" MMP®II bass/mid-range 1 x 1" gold
dome C-CAM® Tweeter
Dimensions 35 x 18.5 x 25 cm
Frequency Response 36Hz - 30kHz
Recommended Amplifier (RMS) 30-120W
Sensitivity (1W@1M) 91 dB
Bass Alignment Bass reflex - Ported front and rear
Nominal Impedance 6 Ohms
Drive Unit Compliment 1 x 6.5" MMP®II bass driver 1 x 6.5"
MMP®II mid-range 1 x 1" gold dome C-CAM® Tweeter
Power Handling (RMS) 150 W
Dimensions (H x W x D) 85 x 18.5 x 25.5 cm
Frequency Response33Hz - 30kHz
Recommended Amplifier (RMS)40-150W
Sensitivity (1W@1M)90 dB
Bass AlignmentBass reflex. Ported front and rear.
Nominal Impedance6 Ohms
Drive Unit Compliment2 x 6.5" MMP®II bass driver 1 x 6.5"
MMP®II mid-range 1 x 1" gold dome C-CAM® Tweeter
Power Handling (RMS)150 W
Dimensions (H x W x D)97 x 20 x 30 cm
Frequency Response 60Hz - 30kHz
Sensitivity (1W@1M) 91 dB
Nominal Impedance 6 Ohms
Power Handling (RMS) 150 W
Recommended Amplifier (RMS) 40-150W
Bass Alignment Bass reflex. Ported front and rear.
Drive Unit Compliment 2 x 5.5" MMP®II bass mid-range 1 x
1" gold dome C-CAM® Tweeter
Dimensions (H x W x D) 16.5 x 46 x 16.5 cm
Low Frequency Limit 28 Hz
Upper Frequency Limit 45 - 150 Hz
Low Pass Filter Alignment 12dB/octave filter
Cabinet Alignment Bass reflex. 18mm construction.
Amplifier Output 100 watts
Drive Unit Compliment 1 x 10" Long throw driver
Input Impedance 20K Ohms
Mains Input Voltage 110 - 120 Vac / 220 - 240 Vac
Dimensions (H x W x D) 32 x 32 x 34 cm
Black
Çift
A
135 £
Walnut
Çift
A
135 £
Black
Çift
A
175 £
Walnut
Çift
A
175 £
Black
Çift
A
340 £
Walnut
Çift
A
340 £
Black
Çift
A
450 £
Walnut
Çift
A
450 £
Black
Adet
A
115 £
Walnut
Adet
A
115 £
Black
Adet
A
300 £
Walnut
Adet
A
300 £
Black Oak
Çift
A
230 £
White Ash
Çift
A
230 £
Rosmah
Çift
A
230 £
Walnut
Çift
A
230 £
Black Oak
Çift
A
280 £
White Ash
Çift
A
280 £
Rosmah
Çift
A
280 £
Walnut
Çift
A
280 £
Black Oak
Çift
A
560 £
White Ash
Çift
A
560 £
Rosmah
Çift
A
560 £
Bronze BX Series
SBRS1B
SBRS1W
SBRS1R
Bronze BX 1
Bookshelf Speaker
SBRS1WN
SBRS2B
SBRS2W
SBRS2R
Bronze BX 2
Bookshelf Speaker
SBRS2WN
SBRS5B
SBRS5W
Bronze BX 5 Floor
Standing Speaker
SBRS5R
Frequency Response +/- 3dB 55Hz - 30kHz
Sensitivity (1W@1m) 88 dB
Nominal Impedance 8 Ohms
Power Handling (RMS) 70 W
Recommended Amplifier (RMS) 15 - 70 W
Cabinet Design Rear ported bass reflex. HiVe®II port
Crossover Frequency 3.2 kHz
Drive Unit Complement 1 x 140mm (5 1/2") C-CAM® bass
mid-range driver.
1 x 25mm (1") gold dome C-CAM® tweeter
Dimensions: (HxWxD) 26 x 16.5 x 18 cm
Frequency Response +/- 3Db 42Hz - 30kHz
Sensitivity (1W@1m) 90 dB
Nominal Impedance 8 Ohms
Power Handling (RMS) 100 W
Recommended Amplifier (RMS) 30 - 100 W
Cabinet Design Front ported bass reflex. HiVe®II port
technology
Crossover Frequency 3.2kHz
Drive Unit Complement 1 x 165mm (6 1/2") C-CAM® bass
mid-range driver
1 x 25mm (1") gold dome C-CAM® tweeter
Dimensions: (HxWxD) 35 x 18.5 x 25.5 cm
Frequency Response +/- 3Db 36Hz - 30kHz
Sensitivity (1W@1m) 90 dB
Nominal Impedance 8 Ohms
Power Handling (RMS) 120 W
Recommended Amplifier (RMS) 30 - 120 W
Cabinet Design Dual chamber bass reflex – Ported front and
rear. HiVe®II port technology
Drive Unit Complement 1 x 140mm (5 1/2") C-CAM® bass.
1 x 140mm (5 1/2") C-CAM® bass mid-range driver.
1 x 25 mm (1") gold dome C-CAM® tweeter.
Crossover Frequency LF: -6dB @ 400Hz MF/HF: 3.2kHz
External Dimensions: (HxWxD ) 85 x 16.6 x 24.8 cm
Bronze BX 5 Floor
Standing Speaker
SBRS5WN
SBRS6B
SBRS6W
SBRS6R
Bronze BX 6 Floor
Standing Speaker
SBRS6WN
SBRSFXB
SBRSFXW
SBRSFXR
Bronze BX FX
Home Theater
SBRSFXWN
SBRSCB
SBRSCW
SBRSCR
Bronze BX FX
Center
SBRSCWN
SBRSW10B
SBRSW10W
Bronze BX W10
Subwoofer
SBRSW10R
SBRSW10WN
Nominal Impedance 8 Ohms
Power Handling (RMS) 120 W
Recommended Amplifier (RMS) 30 - 120 W
Cabinet Design Dual chamber bass reflex – Ported front and
rear. HiVe®II port technology
Drive Unit Complement 1 x 140mm (5 1/2") C-CAM® bass.
1 x 140mm (5 1/2") C-CAM® bass mid-range driver.
1 x 25 mm (1") gold dome C-CAM® tweeter.
Crossover Frequency LF: -6dB @ 400Hz MF/HF: 3.2kHz
External Dimensions: (HxWxD ) 85 x 16.6 x 24.8 cm
Frequency Response +/- 3Db 34Hz - 30kHz
Sensitivity (1W@1m) 90 dB
Nominal Impedance 8 Ohms
Power Handling (RMS) 150 W
Recommended Amplifier (RMS) 40 - 150 W
Cabinet Design Dual chamber bass reflex – Ported front and
rear. HiVe®II port technology
Drive Unit Complement 2 x 165mm (6 1/2") C-CAM® bass
drivers.
1 x 165mm (6 1/2") C-CAM® bass mid-range driver.
1 x 25 mm (1") gold dome C-CAM® tweeter
Crossover Frequency LF: -6dB @ 600Hz MF/HF: 3.4kHz
External Dimensions: (HxWxD ) 98.5 x 18.6 x 31.5 cm
Frequency Response +/- 3Db 65Hz - 30kHz
Sensitivity (1W@1m) 88 dB
Nominal Impedance 8 Ohms
Power Handling (RMS) 80 W
Recommended Amplifier (RMS) 25 - 80 W
Cabinet Design Sealed Cabinet
Drive Unit Complement 1 x 140mm (5 1/2") C-CAM® bass
mid-range driver.
2 x 25 mm (1") gold dome C-CAM® tweeter
Crossover Frequency 2.2 kHz
External Dimensions: (HxWxD) 28.7 x 27.6 x 10.5 cm
Frequency Response +/- 3Db 60Hz - 30kHz
Sensitivity (1W@1m) 90 dB
Nominal Impedance 8 Ohms
Power Handling (RMS) 120 W
Recommended Amplifier (RMS) 20 - 120 W
Cabinet Design Sealed Cabinet
Drive Unit Complement 2 x 140mm (5 1/2") C-CAM® bass
mid-range driver.
1 x 25 mm (1") gold dome C-CAM® tweeter
Crossover frequency 3.2 kHz
External Dimensions: (H x W x D) 16.6 x 46 x 16.5 cm
Low Frequency Limit 27 Hz
Upper Frequency Limit 40 – 150 Hz Variable
Low Pass Filter Alignment 12dB/Octave variable + 12dB
Octave fixed @ 150Hz
Amplifier Output 200 W (RMS)
Amplifier Classification Class - D Digital amplifier with switch
mode PSU
Driver Compliment 1 x 10” C-CAM® long throw driver
Dimensions: (HxWxD) 32 x 32 x 33 cm
Input Impedance 20 K Ohms
Standby power consumption 0.17 watts (ErP certified)
Mains Input Voltage 110-120 Vac/ 220-240 Vac - 50-60Hz
Walnut
Çift
A
560 £
Black Oak
Çift
A
700 £
White Ash
Çift
A
700 £
Rosmah
Çift
A
700 £
Walnut
Çift
A
700 £
Black Oak
Adet
A
280 £
White Ash
Adet
A
280 £
Rosmah
Adet
A
280 £
Walnut
Adet
A
280 £
Black Oak
Adet
A
160 £
White Ash
Adet
A
160 £
Rosmah
Adet
A
160 £
Walnut
Adet
A
160 £
Black Oak
Adet
A
500 £
White Ash
Adet
A
500 £
Rosmah
Adet
A
500 £
Walnut
Adet
A
500 £
Black
Çift
A
500 £
OAK
Çift
A
500 £
Rosmah
Çift
A
500 £
Walnut
Çift
A
500 £
Black Gloss
Çift
A
500 £
White Gloss
Çift
A
500 £
Black
Çift
A
650 £
Oak
Çift
A
650 £
Rosmah
Çift
A
650 £
Walnut
Çift
A
650 £
Black Gloss
Çift
A
715 £
White Gloss
Çift
A
715 £
Black
Çift
A
1.000 £
OAK
Çift
A
1.000 £
Rosmah
Çift
A
1.000 £
Walnut
Çift
A
1.000 £
Black Gloss
Çift
A
1.100 £
White Gloss
Çift
A
1.100 £
Silver Series
SSS1B
SSS1O
SSS1R
SSS1WN
Silver 1 Bookshelf
Speaker
SSS1BG
SSS1W
SSS2B
SSS2O
SSS2R
SSS2WN
Silver 2 Speaker
SSS2BG
SSS2W
SSS6B
SSS6O
SSS6R
SSS6WN
SSS6BG
SSS6W
Silver 6 Floor
Standing Speaker
System Format 2-Way
Frequency Response 45Hz - 35kHz
Sensitivity (1W@1M) 87dB
Nominal Impedance 8 Ohms
Maximum SPL (dBA) 110.8 (pair)
Power Handling (RMS) 100W
Recommended Amplifier 40-100W
Bass Alignment Bass reflex - rear ported HiVe®II port
System
Crossover Frequency 3.0kHz
Drive Unit Complement 1 x 6" RST® Bass/Mid driver 1 x 1"
(25mm) C-CAM® gold dome tweeter
Cabinet Dimensions: (Excluding Grille & Terminals)
(HxWxD) 31.2 x 18.5 x 24 cm
Product External Dimensions: (Including Terminals)
(HxWxD) 31.2 x 18.5 x 26.3 cm
Product External Dimensions: (Including Grille & Terminals)
(HxWxD) 31.2 x 18.5 x 27.5 cm
System Format 2-Way
Frequency Response 40Hz - 35kHz
Sensitivity (1W@1M) 88dB
Nominal Impedance 8 Ohms
Maximum SPL (dBA) 112.6 (pair)
Power Handling (RMS) 120W
Recommended Amplifier (RMS) 40-120W
Bass Alignment Bass reflex - rear ported HiVe®II port
System
Crossover Frequency 2.0kHz
Drive Unit Complement 1 x 8" RST® Bass/Mid driver 1 x 1"
(25mm) C-CAM® gold dome tweeter
Grille & Terminals: (HxWxD)37.5 x 23 x 30 cm
including Terminals: (HxWxD) 37.5 x 23 x 32.3 cm
Including Grille & Terminals: (HxWxD) 37.5 x 23 x 33.5 cm
System Format 2 1/2-Way
Frequency Response 35Hz - 35kHz
Sensitivity (1W@1M) 90dB
Nominal Impedance 8 Ohms
Maximum SPL (dBA) 115.5 (pair)
Power Handling (RMS) 150W
Recommended Amplifier (RMS) 60-150W
Bass Alignment Dual Chamber, Bass reflex with differential
tuning. Twin HiVe®II port System
Crossover Frequency LF: 700Hz MF/HF: 2.7kHz
Drive Unit Complement 1 x 6" RST® Bass driver. 1 x 6" RST
Bass/Mid driver, 1 x 1" C-CAM® gold dome tweeter
Cabinet Dimensions excluding Grille, Terminals and Plinth:
(H x W x D) 88.5 x 18.5 x 24 cm
Terminals: (HxWxD)88.5 x 18.5 x 26.3 cm
Grille & Terminals: (HxWxD) 88.5 x 18.5 x 27.5 cm
Plinth & Feet: (HxWxD) 93.6 x 24.5 x 30 cm
SSS8B
SSS8O
SSS8R
SSS8WN
Silver 8 Floot
Standing Speaker
SSS8BG
SSS8W
SSS10B
SSS10O
SSS10R
SSS10WN
Silver 10 Floor
Standing
SSS10BG
SSS10W
SSSCB
SSSCO
SSSCR
SSSCWN
Silver Centre Home
Theather
SSSCBG
SSSCW
SSSFXB
SSSFXO
SSSFXR
SSSFXWN
Silver FX Home
Theather
SSSFXBG
SSSFXW
SSSW12B
SSSW12O
SSSW12R
Silver SW12
Subwoofer
SSSW12WN
SSSW12BG
SSSW12W
System Format 3 Way
Black
Frequency Response 32Hz - 35kHz
Sensitivity (1W@1M) 90dB
Nominal Impedance 4 Ohms
OAK
Maximum SPL (dBA) 116.8 (pair)
Power Handling (RMS) 200W
Recommended Amplifier (RMS) 80 - 200W
Rosmah
Bass Alignment Bass reflex. Twin HiVe®II port System
Crossover Frequency LF/MF: 500Hz MF/HF: 2.7kHz
Drive Unit Complement 2 x 6" RST® Bass drivers. 1 x 4" RST
Walnut
Mid-range driver. 1 x 1" (25mm) C-CAM® gold dome tweeter
Cabinet Dimensions excluding Grille, Terminals & Plinth:
Black Gloss
(HxWxD) 100 x 18.5 x 30 cm
Terminals: (HxWxD)100 x 18.5 x 32.3 cm
Grille & Terminals: (HxWxD)100 x 18.5 x 33.5 cm
White Gloss
Plinth & Feet: (HxWxD) 102.1 x 24.5 x 36 cm
System Format 3 Way
Frequency Response 30Hz - 35kHz
Sensitivity (1W@1M) 90dB
Nominal Impedance 4 Ohms
Maximum SPL (dBA) 117.8 (pair)
Power Handling (RMS) 250W
Recommended Amplifier (RMS) 80 - 200W
Bass Alignment Bass reflex. Twin HiVe®II port System
Crossover Frequency LF/MF: 550Hz MF/HF: 2.7 kHz
Drive Unit Complement 2 x 8" RST® Bass drivers. 1 x 4" RST
Mid-range driver. 1 x 1" (25mm) C-CAM® gold dome tweeter
Cabinet Dimensions: (H x W x D) (Excluding Grille, Terminals
& Plinth) 105 x 23 x 30 cm
Dimensions: (H x W x D) (Including Terminals) 105 x 23 x
32.3 cm
Dimensions: (H x W x D) (Including Grille & Terminals) 105 x
23 x 33.5 cm
Dimensions: (H x W x D) (Including Plinth & Feet)107.1 x 29
System Format 2 Way (M-T-M)
Frequency Response 45Hz - 35kHz
Sensitivity (1W@1M) 90dB
Nominal Impedance 8 Ohms
Maximum SPL (dBA) 112.5
Power Handling (RMS) 150W
Recommended Amplifier (RMS) 60-150W
Bass Alignment Sealed Cabinet
Crossover Frequency 2.6kHz
Drive Unit Complement 2 x 6" RST® Bass/Mid driver 1 x 1"
(25mm) C-CAM® gold dome tweeter
Dimensions: (H x W x D) (Excluding Grille & Terminals) 18.5
x 50 x 20 cm
Dimensions: (H x W x D) (Including Terminals) 18.5 x 50 x
22.3 cm
Dimensions: (H x W x D)(Including Grille & Terminals) 18.5 x
50 x 23.5 cm
System Format 2 Way
Frequency Response 60Hz - 35kHz
Sensitivity (1W@1M) 87dB
Nominal Impedance 8 Ohms
Maximum SPL (dBA) 110.1 (pair)
Power Handling (RMS) 85W
Recommended Amplifier (RMS) 40-85W
Bass Alignment Sealed Cabinet
Crossover Frequency 2.2kHz
Drive Unit Complement 1 x 6" RST® Bass/Mid driver 2 x 1"
(25mm) C-CAM® gold dome tweeters
Cabinet Dimensions: (H x W x D) (Excluding Grille &
Terminals) 25 x 31.1 x 13 cm
Dimensions: (H x W x D) (Including Terminals) 25 x 31.1 x 13
cm
Dimensions: (H x W x D) (Including Grille & Terminals) 25 x
31.1 x 14.3 cm
Low Frequency Response 20Hz (Typical IEC room)
Upper Frequency Limit 40 - 120Hz Variable
Low Pass Filter Alignment Active 4th order 24dB/Octave
Amplifier Power Output 500W Continuous
Amplifier Classification Class-D amplifier with Switch mode
power supply (SMPSU)
Bass EQ Profiles 1: Movie, 2: Music, 3: Impact
Phase Control 0 & 81 degrees
Auto Sensing Line Level >2mV
Input Level Requirements Standby after 20 minutes if no
signal sensed
Driver Compliment 1 x 12" C-CAM® sub-woofer driver
featuring triple suspension, 3" long throw voice coil
12v Trigger Input 5 - 12v via 3.5mm mono mini-jack
Dimensions: (H x W x D) 34 x 34 x 38 cm (Exc Grille & Amp);
37 x 34 x 41 cm (Including Grille, Amp & Feet)
Mains Input Voltage 110 - 120 Vac / 220 - 240 Vac 50/60Hz
(Electronically Auto selected)
Power Consumption 400 Watts / 0.5 Watts in Standby (ErP
approved)
Çift
A
1.250 £
Çift
A
1.250 £
Çift
A
1.250 £
Çift
A
1.250 £
Çift
A
1.375 £
Çift
A
1.375 £
Black
Çift
A
1.500 £
OAK
Çift
A
1.500 £
Rosmah
Çift
A
1.500 £
Walnut
Çift
A
1.500 £
Black Gloss
Çift
A
1.650 £
White Gloss
Çift
A
1.650 £
Black
Adet
A
375 £
OAK
Adet
A
375 £
Rosmah
Adet
A
375 £
Walnut
Adet
A
375 £
Black Gloss
Adet
A
413 £
White Gloss
Adet
A
413 £
Black
Adet
A
500 £
OAK
Adet
A
500 £
Rosmah
Adet
A
500 £
Walnut
Adet
A
500 £
Black Gloss
Adet
A
550 £
White Gloss
Adet
A
550 £
Black
Adet
A
1.000 £
OAK
Adet
A
1.000 £
Rosmah
Adet
A
1.000 £
Walnut
Adet
A
1.000 £
Black Gloss
Adet
A
1.100 £
White Gloss
Adet
A
1.100 £
Piano Black
Çift
A
950 £
White Gloss
Çift
A
950 £
Walnut
Çift
A
950 £
Gold Series
SG50B
SG50W
SG50WN
GX 50 Bookshelf
Speaker
System Format: 2 Way
Frequency Response: 55 Hz - 60 kHz
Sensitivity (1W@1M): 86 dB
Nominal Impedance: 8 ohms
Maximum S.P.L (Per pair in room): 109.8 dBA
Power Handling (RMS): 100 W
Recommended Amplifier (RMS): 50 - 100 W
Bass Alignment: Bass reflex. HiVe port system
Crossover Frequency: 2.3 kHz
Drive Unit Compliment: 1 x 5.5" RST bass/mid-range driver1
x C-CAM H.F ribbon transducer
Ext Dimensions excl Stand (H x W x D) 30x17x26.3 cm
GX 50 Bookshelf
Speaker
SG50E
SG100B
SG100W
GX 100 Bookshelf
Speaker
SG100WN
SG100E
SG200B
SG200W
GX 200 Floor
Standing Speaker
SG200WN
SG200E
SG300B
SG300W
GX 300 Floor
Standing Speaker
SG300WN
SG300E
SGC150B
SGC150W
SGC150WN
GX CENTRE 150
Home Theather
SGC150E
SGC350B
SGC350W
SGC350WN
GX CENTRE 350
Home Theather
SGC350E
SGFXB
SGFXW
SGFXWN
GX FX Home
Theather
SGXFXR
SGCFXE
SGW15B
SGW15W
GX W15 Subwoofer
SGW15N
SGXW15E
Frequency Response: 55 Hz - 60 kHz
Sensitivity (1W@1M): 86 dB
Nominal Impedance: 8 ohms
Maximum S.P.L (Per pair in room): 109.8 dBA
Power Handling (RMS): 100 W
Recommended Amplifier (RMS): 50 - 100 W
Bass Alignment: Bass reflex. HiVe port system
Crossover Frequency: 2.3 kHz
Drive Unit Compliment: 1 x 5.5" RST bass/mid-range driver1
x C-CAM H.F ribbon transducer
Ext Dimensions excl Stand (H x W x D) 30x17x26.3 cm
Çift
A
1.140 £
Çift
A
1.250 £
Çift
A
1.250 £
Çift
A
1.250 £
Çift
A
1.250 £
Piano Black
Çift
A
2.300 £
White Gloss
Çift
A
2.300 £
Walnut
Çift
A
2.300 £
Piano Ebony
Çift
A
2.760 £
Piano Black
Çift
A
3.000 £
White Gloss
Çift
A
3.000 £
Walnut
Çift
A
3.000 £
Piano Ebony
Çift
A
3.600 £
Piano Black
Adet
A
650 £
White Gloss
Adet
A
650 £
Walnut
Adet
A
650 £
Piano Ebony
Adet
A
780 £
Piano Black
Adet
A
1.000 £
White Gloss
Adet
A
1.000 £
Walnut
Adet
A
1.000 £
Piano Ebony
Adet
A
1.200 £
Piano Black
Adet
A
700 £
White Gloss
Adet
A
700 £
Walnut
Adet
A
700 £
Piano
Rosewood
Adet
A
700 £
Piano Ebony
Adet
A
840 £
Piano Black
Adet
A
1.750 £
White Gloss
Adet
A
1.750 £
Walnut
Adet
A
1.750 £
Piano Ebony
Adet
A
2.100 £
Piano Ebony
System Format: 2 Way
Frequency Response: 42 Hz - 60 kHz
Piano Black
Sensitivity (1W@1M): 88 dB
Nominal Impedance: 8 ohms
Maximum S.P.L (Per pair in room): 112.6 dBA
White Gloss
Power Handling (RMS): 120 W
Recommended Amplifier (RMS): 60 - 100 W
Bass Alignment: Bass reflex. HiVe port system
Walnut
Crossover Frequency: 2.7 kHz
Drive Unit Compliment: 1 x 6.5" RST bass/mid-range driver 1
x C-CAM H.F ribbon transducer
Piano Ebony
Ext Dimensions exc Stand (H x W x D) 36.2x21x30.3 cm
System Format: 3 Way
Frequency Response: 35 Hz - 60 kHz
Sensitivity (1W@1M): 89 dB
Nominal Impedance: 8 ohms
Maximum S.P.L (Per pair in room): 114.5 dBA
Power Handling (RMS): 150 W
Recommended Amplifier : (RMS): 100 - 150 W
Bass Alignment: Bass reflex. HiVe port system
Crossover Frequency: LF - MF: 400 Hz MF - HF: 2.6 kHz
Drive Unit Compliment: 2 x 5.5" RST bass driver 1 x 4" RST
mid-range driver 1 x C-CAM H.F ribbon transducer
Ext Dimensions excl Stand (H x W x D) 95.1 x 17 x 30 cm
System Format: 3 Way
Frequency Response: 30 Hz - 60 kHz
Sensitivity (1W@1M): 90 dB
Nominal Impedance: 8 ohms
Maximum S.P.L (Per pair in room): 116.8 dBA
Power Handling (RMS): 200 W
Recommended Amplifier (RMS): 100 - 150 W
Bass Alignment: Bass reflex. HiVe port system
Crossover Frequency: LF- MF: 790 Hz MF -HF: 2.3 kHz
Drive Unit Compliment: 2 x 6.5" RST bass driver 1 x 4" RST
mid-range driver 1 x C-CAM H.F ribbon transducer
Ext Dimensions exc Stand (H x W x D) 106 x 21 x 33 cm
System Format: 2 Way
Frequency Response: 55 Hz - 60 kHz
Sensitivity (1W@1M): 89 dB
Nominal Impedance: 8 ohms
Maximum S.P.L (Per pair in room): 111.5 dBA
Power Handling (RMS): 150 W
Recommended Amplifier (RMS): 100 - 150 W
Bass Alignment: Sealed Cabinet
Crossover Frequency: L.F - M.F: 2.8 kHz
Drive Unit Compliment: 2 x 5.5" RST bass/mid-range driver 1
x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D) 17.2 x 46.1 x
30.3 cm
System Format: 3 Way
Frequency Response: 40 Hz - 60 kHz
Sensitivity (1W@1M): 90 dB
Nominal Impedance: 8 ohms
Maximum S.P.L (Per pair in room): 113.8 dBA
Power Handling (RMS): 200 W
Recommended Amplifier (RMS): 100 - 200 W
Bass Alignment: Sealed Cabinet
Crossover Frequency: L.F - M.F: 800 Hz M.F - H.F: 2.3 kHz
Drive Unit Compliment: 2 x 6.5" RST bass/mid-range driver 1
x 4" RST mid-range driver 1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D) 25.4 x 58.1 x
33.3 cm
System Format: 2 Way
Frequency Response: 60 Hz - 60 kHz
Sensitivity (1W@1M): 87 dB
Nominal Impedance: 8 ohms
Maximum S.P.L (Per pair in room): 110.8 dBA
Power Handling (RMS): 100 W
Recommended Amplifier: (RMS): 50 - 100 W
Bass Alignment: Sealed Cabinet
Crossover Frequency: Bi-Pole: 2.3 kHz Di-Pole: 2.6 kHz
Drive Unit Compliment: 1 x 6.5" RST bass driver 2 x 4" RST
mid-range driver 1 x C-CAM H.F ribbon transducer 2 x 1" gold
dome C-CAM Tweeter
Ext Dimensions excl Stand (H x W x D) 31 x 39 x 16 cm
Sealed Cabinet. 25mm MDF construction with internal
bracing. Sealed amplifier compartment
Low Frequency Limit: 18 Hz
Low Pass Filter Alignment: Active 4th order 24dB/octave
(6/12/18/24 dB user adjustable)
Amplifier Output 650 watts cont, 1200 watts (peak)
Equalisation 4 Settings (Off/Music/Movie/Impact)
Drive Unit complem 1 x 15” C-CAM® sub-woofer driver
featuring triple suspension 3” long throw voice coil
Connections Stereo RCA in/out LFE in/out 12V Trigger in
(3.5mm mono jack) LEO* - 3.5mm Microphone input jack
(microphone supplied)
Input Impedance 20 kohms
Power Consumption Maximum 1000W. Standby < 0.5W
(ErP Compliance)
Dimensions (H x W x D) 43 x 40 x 40 cm
GST
GX STAND
Height including spikes 63.5 cm
Height without spikes 61.2 cm
Base dimensions 28 x 37 cm
Top plate dimensions 16 x 25.5 cm
Cable exit diameter 2 cm
Çift
A
420 £
Çift
A
3.300 £
Çift
A
3.300 £
Çift
A
3.300 £
Piano Black
Çift
A
6.610 £
Ebony
Çift
A
6.610 £
Rosewood
Çift
A
6.610 £
Piano Black
Çift
A
8.400 £
Ebony
Çift
A
8.400 £
Rosewood
Çift
A
8.400 £
Piano Black
Çift
A
15.750 £
Ebony
Çift
A
15.750 £
Rosewood
Çift
A
15.750 £
Piano Black
Çift
A
2.200 £
Ebony
Çift
A
2.200 £
Rosewood
Çift
A
2.200 £
Platinium II Series
SP100B
SP100E
PLATINIUM
PL100 II
SP100R
SP200B
SP200E
PLATINIUM
PL200 II
SP200R
SP300B
SP300E
PLATINIUM
PL300 II
SP300R
SP500B
SP500E
PLATINIUM
PL500 II
SP500R
SPC150B
SPC150E
SPC150R
PLATINIUM
PLC150 II
System Format 2 Way - 2 Driver
Frequency Response (-6dB - IEC 268-13) 40Hz - 100kHz
Piano Black
Sensitivity (1W@1M) 88dB
Maximum S.P.L. 111.8dBA (pair)
Nominal Impedance 6Ω (4.5Ω min. @ 160Hz)
Power Handling (RMS) 120W
Recommended Amplifier (RMS) 60 - 120W
Ebony
Cabinet Design Single rear HiVe®II port
Drive Unit Compliment 1 x 61/2" RDT®II bass / mid driver; 1 x
MPD high frequency transducer
Crossover Frequency 3.0kHz
External Dimensions (H x W x D) 370 x 225 x 285mm
Rosewood
(149/16 x 87/8 x 111/4”)
Weight (each) 14.94kg (32lb 14oz)
System Format 3 Way - 4 Driver
Frequency Response (-6dB - IEC 268-13) 35Hz - 100kHz
Sensitivity (1W@1M) 90dB
Maximum S.P.L. 117dBA (pair)
Nominal Impedance 4Ω (4.0Ω min. @ 135Hz)
Power Handling (RMS) 250W
Recommended Amplifier (RMS) 100 - 250W
Cabinet Design Two HiVe®II ports
Sealed mid-range TLE enclosure
Drive Unit Complement 2 x 61/2" RDT®II long-throw bass
drivers; 1 x 4" RDT II mid-range driver
1 x MPD high frequency transducer
Crossover Frequency ; MF/HF: 3.9kHz, LF/MF: 750Hz
External Dimensions (Inc. plinth) (H x W x D)
998 x 360 x 375mm (395/16 x 143/16 x 143/4”)
External Dimensions (Inc. feet & spikes) (H x W x D)
1043 x 360 x 375mm (411/16 x 143/16 x 143/4”)
Weight (each) 36.08kg (79lb 6oz)
System Format 3 Way - 4 Driver
Frequency Response 28Hz - 100kHz
Sensitivity (1W@1M) 90dB
Maximum S.P.L. 117.8dBA (pair)
Nominal Impedance 4Ω (4.2Ω min. @ 111Hz)
Power Handling (RMS) 300W
Recommended Amplifier (RMS) 100 - 300W
Cabinet Design Two HiVe®II ports
Sealed mid-range TLE enclosure
Drive Unit Compliment
2 x 8" RDT®II long-throw bass drivers
1 x 4" RDT II mid-range driver
1 x MPD high frequency transducer
Crossover Frequency MF/HF: 3.4kHz, LF/MF: 500Hz
External Dimensions (Inc. plinth) (H x W x D)
1113 x 410 x 470mm (4313/16 x 161/8 x 181/2”)
External Dimensions (Inc. feet & spikes) (H x W x D)
1158 x 410 x 470mm (459/16 x 161/8 x 181/2”)
Weight (each) 54.52kg (120lb)
System Format 3 Way - 7 Driver
Frequency Response (-6dB - IEC 268-13) 22Hz - 100kHz
Sensitivity (1W@1M) 91dB
Maximum S.P.L. 120dBA (pair)
Nominal Impedance 4Ω (4.2Ω min. @ 120Hz)
Power Handling (RMS) 400W
Recommended Amplifier (RMS) 150 - 400W
Cabinet Design Four HiVe®II ports
Sealed mid-range TLE enclosure
Drive Unit Compliment
4 x 8" RDT®II long-throw bass drivers
2 x 4" RDT II mid-range driver
1 x MPD high frequency transducer
Crossover Frequency MF/HF: 3.6kHz, LF/MF: 460Hz
External Dimensions (Inc. plinth) (H x W x D)
1803 x 504 x 626mm (71 x 1913/16 x 245/8”)
External Dimensions (Inc. feet & spikes) (H x W x D)
1848 x 504 x 626mm (723/4 x 1913/16 x 245/8”)
Weight (each) 99.1kg (218lb)
System Format 21/2 Way - 3 Driver
Frequency Response (-6dB - IEC 268-13) 45Hz - 100kHz
Sensitivity (1W@1M) 89dB
Maximum S.P.L. 112dBA
Nominal Impedance 6Ω (4.5Ω min. @ 170Hz)
Power Handling (RMS) 200W
Recommended Amplifier (RMS) 60 - 200W
Cabinet Design Single rear HiVe®II port
Drive Unit Compliment
1 x 61/2" RDT®II bass driver
1 x 61/2" RDT II bass / mid driver
1 x MPD high frequency transducer
Crossover Frequency
MF/HF: 3.0kHz, LF/MF: 600Hz (-6dB LF)
External Dimensions (H x W x D)
225 x 583 x 291.2mm (2215/16 x 87/8 x 117/16”)
Weight (each) 23.98kg (52lb 12oz)
SPC350B
SPC350E
PLATINIUM
PLC350 II
SPC350R
SGXFXR
GOLD FX II
SPW215B
SPW215E
PLATINIUM
PLW215 ıı
SPW215R
System Format 3 Way - 4 Driver
Frequency Response (-6dB - IEC 268-13) 32Hz - 100kHz
Sensitivity (1W@1M) 90dB
Maximum S.P.L. 114dBA
Nominal Impedance 4Ω (4.0Ω min. @ 115Hz)
Power Handling (RMS) 250W
Recommended Amplifier (RMS) 100 - 250W
Cabinet Design Two HiVe®II ports
Sealed mid-range TLE enclosure
Drive Unit Compliment
2 x 8" RDT®II long-throw bass drivers
1 x 4" RDT II mid-range driver
1 x MPD high frequency transducer
Crossover Frequency MF/HF: 3.3kHz, LF/MF: 780Hz
External Dimensions (H x W x D)
288 x 800 x 368mm (115/16 x 311/2 x 141/2”)
Weight (each) 43.02kg (94lb 10oz)
System Format: 2-Way
Frequency Response : 60 Hz - 60 kHz
Sensitivity (1W@1M) : 87 dB
Nominal Impedance (ohms) : 8
Maximum S.P.L (dBA) : 110.8
Power Handling - R.M.S. (W) : 100
Recommended Amplifier (W) : 50 - 100
Bass Alignment : Sealed Cabinet
Crossover Frequency
Bi-Pole: 2.3 kHz
Di-Pole: 2.6 kHz
Drive Unit Complement
1 x 61/2" RST® bass driver
2 x 4" RST mid-range driver
1 x C-CAM® H.F ribbon transducer
2 x 1" gold dome C-CAM Tweeter
Cabinet Dimensions (HxWxD) : 310 x 390 x 160 mm
Complete Dimensions Inc Terminals (HxWxD)
310 x 390 x 168 mm
Weight (each) : 11.9kg (26lb 2oz)
Amplifier Power Output
Dual Amplifier design with a single amplifier powering each
driver,
Combined 1400W RMS, 2000W Peak (Burst Ratio 1:4
Continuous,
Measured into two non-reactive 4 Ohm Loads) Amplifier
Classification
2x Class-D amplifiers, Balanced Differential Input,
Differentially loaded Power Supply, DSP controlled. High
current Switch mode power supply (SMPSU) 172MHz DSP
Core with 3500 instructions per sample, 139dB of dynamic
range and 56-bit double precision processing, dynamically
updated by an 80MHz MCU
Piano Black
Çift
A
3.300 £
Ebony
Çift
A
3.300 £
Rosewood
Çift
A
3.300 £
Piano
Rosewood
Çift
A
840 £
Piano Black
Çift
A
3.500 £
Ebony
Çift
A
3.500 £
Rosewood
Çift
A
3.500 £
piano
Çift
A
600 £
piano
Adet
A
420 £
Black Gloss
Çift
A
200 £
White Gloss
Çift
A
200 £
Walnut
Çift
A
200 £
Çift
A
350 £
Çift
A
350 £
Çift
A
350 £
Stand Dimensions: (H x W x D)
615 x 380 x 407mm (Ex feet)
652 x 380 x 407mm (Inc feet & Spikes)
PL100 Stand
PLATINIUM PL100
Stand
Stand Dimensions: (H x W x D)
278 x 580 x 407 mm (Ex feet)
312 x 580 x 407mm (Inc feet & Spikes)
PL350STAND
PLATINIUM 350
STAND
Radius Series
SRAD45BL
SRAD45W
Radius 45 HD
Subwoofer
SRAD45WN
SRAD90BL
SRAD90W
SRAD90WN
Radius 90 HD
Bookshelf Speaker
Frequency Response 120Hz - 20KHz
Sensitivity 87dB
Nominal Impedance 8 Ohms
Power Handling Single (RMS) 25 Watts
System Power Handling (RMS) 50 Watts
Recommended Amplifier 15-50 Watts
Maximum SPL (dBA) 101
Bass Alignment Sealed Cabinet
Driver complement 1 x 3" (75mm) MMP2® cone bass/midrange Driver 1 x 3/4" (20mm) C-CAM® gold dome tweeter
Dimensions (H x W x D)
10 x 10 x 10 cm
10 x 10 x 12.4 cm (Inc Grille &amp; Terminals)
10 x 10 x 16.2 cm (Inc Grille &amp; Bracket)
Bracket Optional - MASM
Frequency Response 80Hz - 35KHz
Sensitivity 83dB
Nominal Impedance 8 Ohms
Black Gloss
Power Handling Single (RMS) 75 Watts
System Power Handling (RMS) 100 Watts
Recommended Amplifier 30-100 Watts
Maximum SPL (dBA) 102
Bass Alignment Bass reflex - Rear ported
White Gloss
Driver complement 1 x 4” (100mm) C-CAM® cone bass/mid
driver 1 x 1” (25mm) C-CAM gold dome tweeter
(H x W x D) 19.8 x 12.5 x 14 cm
(H x W x D)(Inc Grille &amp; Terminals) 19.8 x 12.5 x 16.4 cm
Dimensions (H x W x D)(Inc Grille &amp; Bracket) 19.8 x 12.5
Walnut
x 20.3 cm
Bracket Optional - Monitor Audio Speaker Mount (MASM)
SRAD200BL
SRAD200W
Radius 200 HD
Center Speaker
SRAD200WN
SRAD225BL
SRAD225W
Radius 225 HD
Center Speaker
SRAD225WN
SRAD270BL
SRAD270W
Radius 270 HD
Floor Standing
Speaker
SRAD270WN
SRAD1BL
SRAD1W
Radius ONE HD
Home Theather
SRAD1WN
SRAD380BL
SRAD380W
Radius 380 HD
Subwoofer
SRAD380WN
SRAD390BL
SRAD390W
Radius 390 HD
Subwoofer
SRAD390WN
Frequency Response 60Hz - 35KHz
Sensitivity 86dB
Nominal Impedance 6 Ohms
Power Handling Single (RMS) 100 Watts
System Power Handling (RMS) 150 Watts
Recommended Amplifier 40-150 Watts
Maximum SPL (dBA) 106
Bass Alignment Bass reflex - Rear ported
Driver complement 2 x 4” (100mm) C-CAM® cone bass/mid
driver 1 x 1” (25mm) C-CAM gold dome tweeter
Dimensions (H x W x D) 12.5 x 33 x 14 cm
Dimensions (H x W x D)(Inc Grille &amp; Terminals) 12.5 x
33 x 16.4 mm
Frequency Response 80Hz - 35KHz
Sensitivity 87dB
Nominal Impedance 6 Ohms
Power Handling Single (RMS) 100 Watts
System Power Handling (RMS) 150 Watts
Recommended Amplifier 40-150 Watts
Maximum SPL (dBA) 107
Bass Alignment Bass reflex - Front ported
Driver complement 2 x 4” (100mm) C-CAM® cone bass/mid
driver 1 x 1” (25mm) C-CAM gold dome tweeter
Dimensions (H x W x D) 61 x 14 x 6.7 cm
Dimensions (H x W x D)(Inc Grille &amp; Terminals) 61 x 14
x 7.7 cm
Dimensions (H x W x D)(Inc Grille &amp; Bracket) 61 x 14 x
Frequency Response 50Hz - 35KHz
Sensitivity 87dB
Nominal Impedance 6 Ohms
Power Handling Single (RMS) 100 Watts
System Power Handling (RMS) 150 Watts
Recommended Amplifier 40-150 Watts
Maximum SPL (dBA) 107
Bass Alignment Bass reflex - Front and rear ported
Driver complement 2 x 4” (100mm) C-CAM® cone bass/mid
driver 1 x 1” (25mm) C-CAM gold dome tweeter
Cabinet Dimensions (H x W x D) 100 x 17.7 x 20.8 cm Inc
Plinth, Without Spikes
Cabinet Dimensions (H x W x D)(Inc Grille &amp; Terminals)
102.5 x 17.7 x 20.8 cm
Frequency Response 90Hz - 35KHz
Sensitivity 87dB
Nominal Impedance 6 Ohms
Power Handling Single (RMS) 75 Watts
System Power Handling (RMS) 100 Watts
Recommended Amplifier 30-100 Watts
Maximum SPL (dBA) 106
Bass Alignment C:Bass reflex - Front ported L/R:Bass reflex Side ported
Driver complement 3 x 4” (100mm) C-CAM cone bass/mid
driver 3 x 1” (25mm) C-CAM gold dome tweeter
Dimensions (H x W x D) 17.5 x 98 x 6.7 cm
Dimensions (H x W x D)(Inc Grille & Terminals) : 17.5 x 98 x
7.9 cm
System Format Active sub-woofer system – Auxiliary (ABR)
loading. 18mm MDF cabinet
Low Frequency Limit 30Hz (- 6dB)
Upper Frequency Limit Variable 40 – 120 Hz @ 24dB/Octave
Amplifier Power Output 200 Watts @ 1% THD+N
Amplifier Classification Class D amplifier with Switch mode
power supply (SMPSU)
Auto Sensing Line Level >3.5mV
Input Level Requirements Standby after approximately 15
minutes if no signal sensed
Driver Compliment 1 x 8” (200mm) C-CAM® long throw
driver 1 x 8” (200mm) Auxiliary bass radiator
Mains Input Voltage AC 110 - 120 V ~ 50/60Hz; AC 220 - 240 V
~ 50/60Hz (Factory Region Preset)
Dimensions including amp & feet (HxWxD) 30.8 x 29 x 30.5
cm
Power Consumption 200 Watts / 0.5 Watts in Standby (ErP
approved)
System Format Active sub-woofer system – Auxiliary (ABR)
loading. 18mm MDF cabinet
Low Frequency Limit 30Hz (- 6dB)
Upper Frequency Limit Variable 40 – 120 Hz @ 24dB/Octave
Amplifier Power Output 220 Watts @ 1% THD+N
Auto SensingLine Level >3.5mV
Driver Compliment 1 x 10” (250mm) C-CAM® long throw
driver 1 x 10” (250mm) Auxiliary bass radiator
Mains Input Voltage AC 110 - 120 V ~ 50/60Hz; AC 220 - 240 V
~ 50/60Hz (Factory Region Preset)
Dimensions inc amp & feet (HxWxD) 34.8 x 33 x 34.5 cm
Power Consumption: 220 Watts / 0.5 Watts in Standby (ErP
approved
Black Gloss
Adet
A
200 £
White Gloss
Adet
A
200 £
Walnut
Adet
A
200 £
Black Gloss
Adet
A
275 £
White Gloss
Adet
A
275 £
Walnut
Adet
A
275 £
Black Gloss
Çift
A
700 £
White Gloss
Çift
A
700 £
Walnut
Çift
A
700 £
Black Gloss
Adet
A
500 £
White Gloss
Adet
A
500 £
Walnut
Adet
A
500 £
Black Gloss
Adet
A
500 £
White Gloss
Adet
A
500 £
Walnut
Adet
A
500 £
Black Gloss
Adet
A
600 £
White Gloss
Adet
A
600 £
Walnut
Adet
A
600 £
Black
Çift
A
210 £
White
Çift
A
210 £
Speaker stand for radius stands
RADSTBL
Radius Stand HD
RADSTW
Apex Series
SAX10B
Apex A10 Home
Theather
SAX10W
SAX40B
Apex A40 Home
Theather
SAX40W
SAW12B
Apex AW12
Subwoofer
SAW12W
Frequency Response +/- 3dB 60 Hz - 35 KHz
Sensitivity (1W@1M) 87 dB
Driver Compliment 1 x 140mm (5 1/2") RST® mid-bass driver
1 x 25mm (1") C-CAM® gold dome tweeter
Nominal Impedance 8 Ohms
Maximum SPL (each) 110.8 dBA
Recommended Amplifier (RMS) 25 - 100W
Bass Alignment Front ported - bass reflex. HiVE®II port
Power Handling (RMS) 100W
Crossover Frequency 3.0kHz
External Dimensions: (H x W x D) 25 x 14 x 14 cm
Frequency Response +/- 3dB 50Hz - 35KHz
Sensitivity (1W@1M) 90dB
Driver Compliment 2 x 140mm (5 1/2") C-CAM® mid/bass
driver with RST® technology. 1 x 25mm (1") C-CAM® gold
dome tweeter.
Nominal Impedance 8 Ohms
Maximum SPL (each) 116.8 dBA
Recommended Amplifier (RMS) 50 - 200W
Bass Alignment Bass reflex - twin front mounted Dual
HiVE®II ports
Power Handling (RMS) 200W
Crossover Frequency 600Hz & 3.0kHz
External Dimensions: (H x W x D) 61 x 14 x 10 cm
Amplifier Output 500 Watts (RMS) 1000 Watts (Peak)
Low Frequency Limit 27Hz (EQ1) 21Hz (EQ2)
Upper Frequency Limit 40 - 120Hz Variable
Variable Low Pass Filter Alignment Active 4th order
24dB/octave (two-stage filter)
Cabinet Specification Sealed Cabinet with 25mm M.D.F
construction and internal bracing.
Amplifier Classification Class-D amplifier
Driver Compliment 1 x 12" C-CAM® sub-woofer driver
featuring triple suspension, 3" long throw voice coil.
Dimensions: (H x W x D) 34 x 34 x 41 cm
Mains Input Voltage 100 - 120, 220 - 240 Vac, 50/60Hz
Speaker stand for Apex series
Height 916.50mm x Width 240mm Depth 280mm
AXSTB
Metallic
Pearl White
High Gloss
Adet
A
300 £
Metallic
Black High
Gloss
Adet
A
300 £
Metallic
Pearl White
High Gloss
Adet
A
500 £
Metallic
Black High
Gloss
Adet
A
500 £
Metallic
Pearl White
High Gloss
Adet
A
1.000 £
Metallic
Black High
Gloss
Adet
A
1.000 £
Metallic
Pearl White
High Gloss
Çift
A
330 £
Metallic
Black High
Gloss
Çift
A
330 £
Black Cloth
Adet
A
90 £
White
Adet
A
90 £
Black Cloth
Adet
A
90 £
Black Cloth
SET
A
450 £
Apex A10 STAND
AXSTW
Mass Series
SMASS10
MASS 10 Home
Thather
SMASS10W
MASS 10 Home
Thather
SMASSC
MASS CENTRE
Home Theather
SMASS50
MASS 5.0 Home
Theather
Frequency Response 80Hz – 30kHz
Sensitivity 84dB
System Configuration 2- way
Driver complement 1 x 4" C-CAM Bass/Mid-range Driver 1 x
25mm C-CAM® tweeter with vented loading system
Nominal Impedance 8 Ohms
Maximum SPL (each @1M) 104 dBA
Power Handling with amplifier crossover set to 100hz
(RMS) 100 watts
Power Handling (individual) 40 watts
Recommended Amplifier 25-100 watts
Recommended High Pass Crossover Freq. 80-120Hz
Overall Dimensions (H x W x D) 22.4 x 12.8 x 12.8 cm
Frequency Response 80Hz – 30kHz
Sensitivity 84dB
System Configuration 2- way
Driver complement 1 x 4" C-CAM Bass/Mid-range Driver 1 x
25mm C-CAM® tweeter with vented loading system
Nominal Impedance 8 Ohms
Maximum SPL (each @1M) 104 dBA
Power Handling with amplifier crossover set to 100hz
(RMS) 100 watts
Power Handling (individual) 40 watts
Recommended Amplifier 25-100 watts
Recommended High Pass Crossover Freq 80-120Hz
Overall Dimensions (H x W x D) 22.4 x 12.8 x 12.8 cm
Frequency Response 80Hz – 30kHz
System Configuration 2- way drivers complement 1 x 4" CCAM Bass/Mid-range Driver 1 x 25mm C
Nominal Impedance 8 Ohms
Maximum SPL (each @1M) 104 dBA
Power Handling with amplifier crossover set to 100hz
(RMS) 100 watts
Power Handling (individual) 40 watts
Recommended Amplifier 25-100 watts
Recommended High Pass Crossover Freq. 80-120Hz
Overall Dimensions (H x W x D) 12.8 x 22.8 x 12.8 cm
Home Theater Speaker set
Mass 10 22.4 x 12.8 x 12.8 cm
Mass Centre 12.8 x 22.8 x 12.8 cm
MASS W200
Subwoofer
SMASSW200
System FormatActive sub-woofer system - Auxilary (ABR)
loading. 18mm MDF cabinet (CARB2 approved)
Low Frquency Limit 30Hz (-6dB)
Upper frequency limit Variable 40 - 120Hz @ 24dB/Octave
Amplifier Power Output 220 watts @ 1% THD+N
Driver Compliment 1 x 10" (250mm) C-CAM® Long Throw
Driver 1 x 10" (260mm) Auxilary bass radiator
Mains input voltage 100 - 120 Vac / 220 - 240 Vac 50/60Hz
(Factory Region Present)
Dimensions (H x W x D)(Including grilles and feet) 42 x 38.5
x 38.5 cm
Power Consumption 200 watts / 0.5 watts in Standby (ErP
approved)
Black Cloth
Adet
A
350 £
Black
Çift
A
150 £
OEM
Adet
A
400 £
OEM
Adet
A
500 £
Adet
A
450 £
Adet
A
450 £
Adet
A
450 £
Adet
A
450 £
Adet
A
450 £
Adet
A
450 £
Adet
A
225 £
Adet
A
225 £
114 cm x 22.2 cm x 22.2 cm WxHxD
MASSST
MASS Stand
Passive Sound Bar
SB2B
Passive Soundbar50" Panel
SB3B
Passive Soundbar50" Panel
Frequency Response (-3dB) : 90Hz – 30kHz
Sensitivity (1W@1M) : 84dB
Nominal Impedance (ohms) : 8
Power Handling Single - R.M.S. (W) : 40
System Power Handling - R.M.S. (W) : 100 (High pass filter
set to 100Hz)
Recommended Amp Requirements (W) : 30 - 100
Recommended High Pass Crossover Freq : 80 - 120Hz
Maximum SPL (dBA) : 104 (108.8 all channels driven)
Bass Alignment : 3 x Auxiliary Bass Reflex (ABR)
Drive Unit Complement
3 x 4” (100mm) C-CAM® cone bass/mid driver
3 x 1” (25mm) C-CAM gold dome tweeter
Cabinet Dimensions (HxWxD)
145 x 1110 x 89mm (511/16 x 4311/16 x 31/2 inch)
External Dimensions Inc Bracket (HxWxD)
145 x 1110 x 100mm (511/16 x 4311/16 x 315/16 inch)
Weight (lbs) : 7.64Kg (16lb 12oz)
Frequency Response (-3dB) : 90Hz – 30kHz
Sensitivity (1W@1M) : 84dB
Nominal Impedance (ohms) : 8
Power Handling Single - R.M.S. (W) : 40
System Power Handling - R.M.S. (W) : 100 (High pass filter
set to 100Hz)
Recommended Amp Requirements (W) : 30 - 100
Recommended High Pass Crossover Freq : 80 - 120Hz
Maximum SPL (dBA) : 104 (108.8 all channels driven)
Bass Alignment : 3 x Auxiliary Bass Reflex (ABR)
Drive Unit Complement
3 x 4” (100mm) C-CAM® cone bass/mid driver
3 x 1” (25mm) C-CAM gold dome tweeter
Cabinet Dimensions (HxWxD)
145 x 1110 x 89mm (511/16 x 4311/16 x 31/2 inch)
External Dimensions Inc Bracket (HxWxD)
145 x 1110 x 100mm (511/16 x 4311/16 x 315/16 inch)
Weight (lbs) : 7.64Kg (16lb 12oz)
Sound Frame Series
SSF1B
SSF1W
SF1 Portrait
Cumstom Install
SSF1P
SSF2B
SSF2W
SF2 Landscape
Cumstom Install
SSF2P
SSF3B
SSF3W
SF3 Landscape
Cumstom Install
Frequency Response: 55Hz - 35KHz
High Gloss
Impedance (nominal): 8 ohms
Black
Power handling (RMS): 100 W
Lacquer
Maximum SPL (each @1M): 106 dBA
Amplifier (RMS): 25 - 100 W
Bass Alignment: Sealed Box
High Gloss
Crossover Frequency: 550Hz & 3.3KHz
White
System Configuration: 3 Way
Lacquer
Driver Compliment: 1 x 165mm (6.5 inches) C-CAM®
mid/bass driver with RST®II; 1 x 102mm (4 inches) IDC® midrange driver with dual concentric 25mm (1 inches) C-CAM®
Primed
gold dome tweeter
Finish
Inc Frame: (H x W x D) 55.2 x 40.2 x 8.7 mm
(Paintable)
Cut-out (H x W x D) 50 x 35 x 7.5 cm
Frequency Response 55Hz - 35KHz
High Gloss
Sensitivity (1W@1m) 86 dB
Black
Impedance (nominal) 8 Ohms
Power handling (RMS) 100 W
Lacquer
Maximum SPL (each @1M) 106 dBA
Amplifier (RMS) 25 - 100 W
High Gloss
Bass Alignment Sealed Box
White
Crossover Frequency 550Hz & 3.3KHz
Lacquer
System Configuration 3-Way
Driver Compliment 1 x 165mm (6.5 inches) C-CAM®
mid/bass driver with RST®II 1 x 102mm (4 inches) IDC® midPrimed
range driver with dual concentric 25mm (1 inches) CFinish
CAM®gold dome tweeter
(Paintable)
Inc Frame: (HxWxD) 79 x 24 x 8.7 cm
Depth from wall 87.5 mm
Frequency Response 75Hz – 35kHz
High Gloss
Sensitivity 86dB
Black
System Configuration 2-Way
Lacquer
Driver Complement 1 x 4" C-CAM mid-range driver 1 x 1"
pivoting gold dome tweeter
High Gloss
Power Handling (RMS) 50W
White
Maximum SPL (each @1m) 102.5dBA
Lacquer
Recommended Amplifier (RMS) 25 – 50W
Bass Alignment Ported Box
Nominal Impedance 8 Ohms
Crossover Frequency 3.2kHz
Inc Frame:(HxWxD) 28.9 x 28.9 x 7.7 cm
Depth from wall: 77.5 mm (3 Inches)
SF3 Landscape
Cumstom Install
SSF3P
SSF1BI
SSF1WI
SF1 Portrait
Cumstom Install
SSF1PI
SSF2BI
SSF2WI
SF2 Landscape
Cumstom Install
SSF2PI
SSF3BI
SSF3WI
SF3 Landscape
Cumstom Install
SSF3PI
Frequency Response 75Hz – 35kHz
Sensitivity 86dB
System Configuration 2-Way
Driver Complement 1 x 4" C-CAM mid-range driver 1 x 1"
pivoting gold dome tweeter
Power Handling (RMS) 50W
Maximum SPL (each @1m) 102.5dBA
Recommended Amplifier (RMS) 25 – 50W
Bass Alignment Ported Box
Nominal Impedance 8 Ohms
Crossover Frequency 3.2kHz
Inc Frame:(HxWxD) 28.9 x 28.9 x 7.7 cm
Depth from wall: 77.5 mm (3 Inches)
Frequency Response 55Hz - 35KHz
Impedance (nominal) 8 Ohms
Power handling (RMS) 100 W
Maximum SPL (each @1M) 106 dBA
Amplifier (RMS) 25 - 100 W
Bass Alignment Sealed Box
Crossover Frequency 550Hz & 3.3KHz
System Configuration 3-Way
Driver Compliment 1 x 165mm (6.5 inches) C-CAM®
mid/bass driver with RST®II 1 x 102mm (4 inches) IDC® midrange driver with dual concentric 25mm (1 inches) CCAM®gold dome tweeter
Inc Frame: (HxWxD) 55.2 x 40.2 x 8.7 cm
Cut-out: (HxWxD) 50 x 35 x 7.5 cm
Depth from wall : 19 mm (3/4 Inches)
Frequency Response 55Hz - 35KHz
Sensitivity (1W@1m) 86 dB
Impedance (nominal) 8 Ohms
Power handling (RMS) 100 W
Maximum SPL (each @1M) 106 dBA
Amplifier (RMS) 25 - 100 W
Bass Alignment Sealed Box
Crossover Frequency 550Hz & 3.3KHz
System Configuration 3 Way
Driver Compliment 1 x 165mm (61/2 inches) C-CAM®
mid/bass driver with RST®II 1 x 102mm (4 inches) IDC® midrange driver with dual concentric 25mm (1 inches) CCAM®gold dome tweeter
Inc Frame: (Hx WxD) 80.2 x 25.2 x 8.7 cm
Cut-out: (HxW xD) 75 x 20 x 7.5 cm
Depth from wall 19 mm (3/14 Inches)
Frequency Response 75Hz – 35kHz
Sensitivity 86dB
System Configuration 2-Way
Driver Complement 1 x 4" C-CAM mid-range driver 1 x 1"
pivoting gold dome tweeter
Power Handling (RMS) 50W
Maximum SPL (each @1m) 102.5dBA
Recommended Amplifier (RMS) 25 – 50W
Bass Alignment Ported Box
Nominal Impedance 8 Ohms
Crossover Frequency 3.2kHz
Inc Frame:(HxWxD) 30.1 x 30.1 x 7.7 cm
Cut-out: (HxWxD) 25.1 x 25.1 x 5.9 cm
Depth from wall : 18 mm (3/4 Inches)
Primed
Finish
(Paintable)
Adet
A
225 £
High Gloss
Black
Lacquer
Adet
A
450 £
High Gloss
White
Lacquer
Adet
A
450 £
Primed
Finish
(Paintable)
Adet
A
450 £
High Gloss
Black
Lacquer
Adet
A
450 £
High Gloss
White
Lacquer
Adet
A
450 £
Primed
Finish
(Paintable)
Adet
A
450 £
High Gloss
Black
Lacquer
Adet
A
225 £
High Gloss
White
Lacquer
Adet
A
225 £
Primed
Finish
(Paintable)
Adet
A
225 £
White
Adet
B
105 £
White
Adet
B
135 £
White
Adet
B
135 £
Custom Install
SCT165
CT165
Custom Install
SCT165T2
CT165-T2
Custom Install
SCT180
CT180
Custom Install
Frequency Response 60 Hz - 25 kHz
Impedance (Nominal) 6 Ohms
Sensitivity (1W@1M) 88.5 dB
Maximum SPL 107.4 dBA
Power Handling (RMS) 65 W
Recommended Amp Requirements 20 - 65 W
Drivers Unit Complement 6.5” MMP®II cone bass driver 1”
C-CAM® pivoting gold dome tweeter
Adjustment Controls HF Level Switch (+3dB / 0dB / -3dB)
Overall Diameter:(including grille) 250 mm
Overall Depth:(including grille) 118 mm
Cut Out Diameter 211 mm
Mounting Depth 114 mm
Fixing Type 3 position Tri-Grip® dog leg fixings
Construction Material Mineral Filled ABS Plastic (UL V0 Fire
Retardant, RoHS2 Compliant)
Frequency Response 60 Hz - 25 kHz
Impedance (Nominal) 6+6 Ohms
Sensitivity (1W@1M) 88.5 dB
Maximum SPL 107.9 dBA
Power Handling (RMS) 65 W
Recommended Amp Requirements 20 - 65 W
Drivers Unit Complement 6.5” MMP®II cone bass driver 2 x
1” C CAM® pivoting gold dome tweeters
Overall Diameter:(including grille) 250 mm
Overall Depth:(including grille) 118 mm
Cut Out Diameter 211 mm
Mounting Depth 114 mm
Construction Material Mineral Filled ABS Plastic (UL V0 Fire
Retardant, RoHS2 Compliant)
Frequency Response 50 Hz - 25 kHz
Impedance (Nominal) 6 Ohms
Sensitivity (1W@1M) 90 dB
Maximum SPL 111.6 dBA
Power Handling (RMS) 120 W
Recommended Amp Requirements 30 - 120 W
Drivers Unit Complement 8” MMP®II cone bass driver 1” CCAM® pivoting gold dome tweeter
Adjustment Controls HF Level Switch (+3dB / 0dB / -3dB)
Diameter:(including grille) 285 mm
Depth:(including grille)125 mm
Cut Out Diameter 247 mm
Mounting Depth 121 mm
Construction Material Mineral Filled ABS Plastic
SCT18T2
CT180-T2
Custom Install
SCT265
CT265
Custom Install
SCT265FX
CT265-FX
Custom Install
SCT265IDC
CT265-IDC
Custom Install
SCT280
CT280
Custom Install
SCT280IDC
CT280IDC
Custom Install
SCT380FX
CT380FX
Custom Install
Frequency Response 50 Hz - 25 kHz
Impedance (Nominal) 6+6 Ohms
Sensitivity (1W@1M) 90 dB
Maximum SPL 111.6 dBA
Power Handling (RMS) 120 W
Recommended Amp Requirements 30 - 120 W
Drivers Unit Complement 8” MMP®II cone bass driver 2 x 1”
C-CAM® pivoting gold dome tweeters
Overall Diameter:(including grille) 285 mm
Overall Depth:(including grille) 125 mm
Cut Out Diameter 247 mm
Mounting Depth 121 mm
Construction Material Mineral Filled ABS Plastic
Frequency Response 60 Hz - 30 kHz
Impedance (Nominal) 6 Ohms
Sensitivity (1W@1M) 88.5 dB
Maximum SPL 108 dBA
Power Handling (RMS) 75 W
Recommended Amp Requirements 20 - 75 W
Drivers Unit Complement 6.5” C-CAM® cone bass driver 1”
C-CAM pivoting gold dome tweeter
Overall Diameter:(including grille)250 mm
Overall Depth:(including grille)118 mm
Cut Out Diameter 211 mm
Mounting Depth 114 mm
Construction Material Mineral Filled ABS Plastic
Frequency Response 60 Hz - 30 kHz
Impedance (Nominal) 6 Ohms
Sensitivity (1W@1M) 88.5 dB
Maximum SPL 108 dBA
Power Handling (RMS) 85 W
Recommended Amp Requirements 20 - 85 W
Drivers Unit Complement 6.5” C-CAM® cone bass driver 2 x
1” C-CAM fixed angle gold dome tweeters
Overall Diameter:(including grille) 250 mm
Overall Depth:(including grille) 153 mm
Cut Out Diameter 211 mm
Mounting Depth 149 mm
Fixing Type 3 position Tri-Grip® dog leg fixings
Construction Material Mineral Filled ABS Plastic
Frequency Response 60 Hz - 30 kHz
Impedance (Nominal) 6 Ohms
Sensitivity (1W@1M) 88.5 dB
Maximum SPL 108 dBA
Power Handling (RMS) 85 W
Recommended Amp Requirements 20 - 85 W
Drivers Unit Complement 6.5” C-CAM® cone bass driver,
pivoting IDC module housing: 4” C-CAM RST® inverted mid
range driver 1” C-CAM gold dome tweeter
Overall Diameter:(including grille) 250 mm
Overall Depth:(including grille) 153 mm
Cut Out Diameter 211 mm
Mounting Depth 149 mm
Construction Material Mineral Filled ABS Plastic
Frequency Response 50 Hz - 30 kHz
Impedance (Nominal) 6 Ohms
Sensitivity (1W@1M) 90 dB
Maximum SPL 111.6 dBA
Power Handling (RMS) 120 W
Recommended Amp Requirements 30 - 120 W
Drivers Unit Complement 8” C-CAM® cone bass driver 1” CCAM pivoting gold dome tweeter
Overall Diameter:(including grille) 285 mm
Overall Depth:(including grille) 125 mm
Cut Out Diameter 247 mm
Mounting Depth 121 mm
Construction Material Mineral Filled ABS Plastic
Frequency Response 50 Hz - 30 kHz
Impedance (Nominal) 6 Ohms
Sensitivity (1W@1M) 90 dB
Maximum SPL 111.6 dBA
Power Handling (RMS) 120 W
Recommended Amp Requirements 30 - 120 W
Drivers Unit Complement 8” C-CAM® cone bass driver,
pivoting IDC module housing: 4” C-CAM RST® inverted mid
range driver 1” C-CAM gold dome tweeter
Overall Diameter:(including grille) 285 mm
Overall Depth:(including grille) 160 mm
Cut Out Diameter 247 mm
Mounting Depth 156 mm
Construction Material Mineral Filled ABS Plastic
Frequency Response 45 Hz - 30 kHz
Impedance (Nominal) 6 Ohms
Sensitivity (1W@1M) 90 dB
Maximum SPL 111.6 dBA
Power Handling (RMS) 120 W
Recommended Amp Requirements 30 - 120 W
Drivers Unit Complement 8” C-CAM® cone bass driver
featuring RST® 2 x 1” C-CAM fixed angle gold dome
tweeters
Overall Diameter:(including grille) 285 mm
Overall Depth:(including grille) 160 mm
Cut Out Diameter 247 mm
Mounting Depth 156 mm
Construction Material Mineral Filled ABS Plastic
White
Adet
B
170 £
White
Adet
B
155 £
White
Adet
B
180 £
White
Adet
B
215 £
White
Adet
B
185 £
White
Adet
B
245 £
White
Adet
B
420 £
SCT380IDC
CT380IDC
Custom Install
SWT165
WT165
Custom Install
SWT180
WT180
Custom Install
SWT265
WT265
Custom Install
SWT280
WT280
Custom Install
SWT280IDC
WT280IDC
Cumstom Install
Frequency Response 45 Hz - 30 kHz
Impedance (Nominal) 6 Ohms
Sensitivity (1W@1M) 90 dB
Maximum SPL 112 dBA
Power Handling (RMS) 150 W
Recommended Amp Requirements 40 - 150 W
Drivers Unit Complement 8” C-CAM® cone bass driver
featuring RST®pivoting IDC module housing: 4” C-CAM RST
inverted mid range driver 1” C-CAM gold dome tweeter
Overall Diameter:(including grille) 285 mm
Overall Depth:(including grille) 160 mm
Cut Out Diameter 247 mm
Mounting Depth 156 mm
Construction Material Mineral Filled ABS Plastic (UL V0 Fire
Retardant,
Frequency Response 60 Hz - 25 kHz
Impedance (Nominal) 6 Ohms
Sensitivity (1W@1M) 88.5 dB
Maximum SPL 107.4 dBA
Power Handling (RMS) 65 W
Recommended Amp Requirements 20 - 65 W
Drivers Unit Complement 6.5” MMP®II cone bass driver 1”
C-CAM® pivoting gold dome tweeter
Overall Dimensions:(including grille) (HxW) 370 mm x 250
mm
Overall Depth:(including grille) 89.5 mm
Cut Out Dimensions:(HxW) 332 mm x 213 mm
Mounting Depth 85.5 mm
Construction Material Mineral Filled ABS Plastic (UL V0 Fire
Retardant, RoHS2 Compliant)
Pre-Construction BracketWB6 (Purple)
Frequency Response 50 Hz - 25 kHz
Impedance (Nominal) 6 Ohms
Sensitivity (1W@1M) 90 dB
Maximum SPL 111.6 dBA
Power Handling (RMS) 120 W
Recommended Amp Requirements 30 - 120 W
Drivers Unit Complement 8” MMP®II cone bass driver 1” CCAM® pivoting gold dome tweeter
Overall Dimensions:(including grille) (H x W) 441 mm x 288
mm
Overall Depth:(including grille) 97.5 mm
Cut Out Dimensions:(H x W) 387 mm x 234 mm
Mounting Depth 93 mm
Construction Material Mineral Filled ABS Plastic (UL V0 Fire
Retardant, RoHS2 Compliant)
Pre-Construction Bracket WB8 (Green)
Frequency Response 55 Hz - 30 kHz
Impedance (Nominal) 6 Ohms
Sensitivity (1W@1M) 88.5 dB
Maximum SPL 107.4 dBA
Power Handling (RMS) 65 W
Recommended Amp Requirements 20 - 65 W
Drivers Unit Complement 6.5” C-CAM® cone bass driver 1”
C-CAM pivoting gold dome tweeter
Overall Dimensions:(including grille) (H x W) 370 mm x 250
mm
Overall Depth:(including grille) 89.5 mm
Cut Out Dimensions:(H x W) 332 mm x 213 mm
Mounting Depth 85.5 mm
Construction Material Mineral Filled ABS Plastic (UL V0 Fire
Retardant, RoHS2 Compliant)
Pre-Construction Bracket WB6 (Purple)
Frequency Response 45 Hz - 30 KHz
Sensitivity (1W@1M) 90 dB
Impedance (Nominal) 6 Ohms
Maximum SPL(Single unit in free space) 111.6 dBA
Power Handling (RMS) 120 W
Recommended Amp Requirements 30 - 120 W
Drivers 1 x 8” C-CAM® cone bass driver 1 x 1” C-CAM
Pivoting gold dome tweeter
Overall Dimensions: (including grille) (H x W) 441 mm x 288
mm
Overall Depth:(including grille) 97.5 mm
Cut-Out Dimensions: (H x W) 387 mm x 234 mm
Mounting Depth 93 mm
Cable Connection Gold plated ‘push’ type terminals
Construction Material Mineral filled ABS plastic (UL94/V0
Frequency Response 45 Hz - 30 kHz
Impedance (Nominal) 6 Ohms
Sensitivity (1W@1M) 90 dB
Maximum SPL 111.6 dBA
Power Handling (RMS) 150 W
Recommended Amp Requirements 40 - 150 W
Drivers Unit Complement 8” C-CAM® cone bass driver,
pivoting IDC module housing: 4” C-CAM RST® inverted mid
range driver 1” C-CAM gold dome tweeter
Overall Dimensions:(including grille) (H x W) 441 mm x 288
mm
Overall Depth:(including grille) 97.5 mm
Cut Out Dimensions:(H x W) 387 mm x 234 mm
Mounting Depth 93 mm
Construction Material Mineral Filled ABS Plastic (UL V0 Fire
Retardant, RoHS2 Compliant)
Pre-Construction Bracket WB8 (Green)
White
Adet
B
270 £
White
Adet
B
120 £
White
Adet
B
150 £
White
Adet
B
170 £
White
Adet
B
200 £
White
Adet
B
275 £
SWT380IDC
WT380IDC
Cumstom Install
Frequency Response 45 Hz - 30 kHz
Impedance (Nominal) 6 Ohms
Sensitivity (1W@1M) 90 dB
Maximum SPL 111.6 dBA
Power Handling (RMS) 120 W
Recommended Amp Requirements 30 - 120 W
Drivers Unit Complement 8” C-CAM® cone bass driver
featuring RST®, pivoting IDC module housing: 4” C-CAM
RST inverted mid range driver 1” C-CAM gold dome tweeter
Overall Dimensions:(including grille) (H x W) 441 mm x 288
mm
Overall Depth:(including grille) 101.5 mm
Cut Out Dimensions: (H x W) 387 mm x 234 mm
Mounting Dept 97.5 mm
Construction Material Mineral Filled ABS Plastic (UL V0 Fire
Retardant, RoHS2 Compliant)
Pre-Construction BracketWB8 (Green)
Adet
B
350 £
Adet
B
105 £
Adet
B
105 £
OEM
Adet
B
155 £
OEM
Adet
B
155 £
Adet
B
130 £
Adet
B
130 £
Adet
B
160 £
Adet
B
160 £
Adet
B
185 £
White
Custom Install
SCWT140R
CWT140
Custom Install
SCWT140S
SCWT240R
CWT240
Series 200
SCWT240S
SCWT160R
CWT160
Custom Install
SCWT160S
SCWT180R
CWT180
Custom Install
SCWT180S
SWT150LCR
WT150-LCR Custom
Install
Frequency Response 75Hz - 30kHz
Impedance (nominal) 6 Ohms
Sensitivity (1W@1M) 85dB
Maximum SPL (single unit in free space) 102.8 dBA
Power Handling (R.M.S) 50 W
Recommended Amp Requirements 10 - 50 W
Drive Unit Complement 1 x 4” MMP®II cone bass driver. 1 x
1” (25mm) C-CAM® pivoting gold dome tweeter
Acoustic Configuration 2-Way
Overall Size Round: 180.2mm Square: 176.7 x 176.7mm
Mounting Depth 98.6mm Cut-out Hole Diameter 149mm
Cable Connection Gold plated ‘push’ type terminals
Grille Attachment Magnetic
Construction Material Mineral filled ABS, RoHS compliant
Frequency Response 75Hz - 30kHz
Impedance (nominal) 6 Ohms
Sensitivity (1W@1M) 85dB
Maximum SPL (single unit in free space) 102.8 dBA
Power Handling (R.M.S) 50 W
Recommended Amp Requirements 10 - 50 W
Drive Unit Complement 1 x 4” MMP®II cone bass driver. 1 x
1” (25mm) C-CAM® pivoting gold dome tweeter
Acoustic Configuration 2-Way
Overall Size Round: 180.2mm Square: 176.7 x 176.7mm
Mounting Depth 98.6mm Cut-out Hole Diameter 149mm
Cable Connection Gold plated ‘push’ type terminals
Grille Attachment Magnetic
Construction Material Mineral filled ABS, RoHS compliant
Frequency Response 60Hz - 30kHz
Impedance (nominal) 6 Ohms
Sensitivity (1W@1M) 88dB
Maximum SPL (single unit in free space) 107.2 dBA
Power Handling (R.M.S) 70 W
Recommended Amp Requirements 15 - 70 W
Drive Unit Complement 1 x 6” MMPII cone bass driver. 1 x 1”
(25mm) C-CAM
pivoting gold dome tweeter
Acoustic Configuration 2-Way
Overall Size Round: 204.2mm Square: 199.2 x 199.2mm
Mounting Depth 99mm Cut-out Hole Diameter 170mm
Cable Connection Gold plated ‘push’ type terminals
Grille Attachment Magnetic
Construction Material Mineral filled ABS, RoHS compliant
Frequency Response 48Hz - 30kHz
Impedance (nominal) 6 Ohms
Sensitivity (1W@1M) 90dB
Maximum SPL (single unit in free space) 110.6 dBA
Power Handling (R.M.S) 120 W
Recommended Amp Requirements 30 - 120 W
Drive Unit Complement 1 x 8” MMPII cone bass driver. 1 x 1”
(25mm) C-CAM
pivoting gold dome tweeter
Acoustic Configuration 2-Way
Overall Size Round: 251.7mm Square: 246.7 x 246.7mm
Mounting Depth 99.4mm Cut-out Hole Diameter 213mm
Construction Material Mineral filled ABS, RoHS compliant
Frequency Response 60Hz - 30kHz
Impedance (nominal) 8 Ohms
Sensitivity (1W@1M) 88dB
Maximum SPL (single unit in free space) 108 dBA
Power Handling (R.M.S) 100 W
Recommended Amp Requirements 30 - 100 W
Drive Unit Complement 2 x 5" MMP®II cone bass driver. 1 x
1" (25mm) C-CAM® pivoting gold dome tweeter
Acoustic Configuration 2-Way
Overall Frame Dimensions 165.8 x 373.6mm without grille
177.4 x 385.2mm - with grille
Mounting Depth 100.2mm
Cut-out Hole Dimensions Minimum 145 x 353mm
White Grill
White Grill
White Grill
White Grill
SWT250LCR
WT250-LCR
Custom Install
Frequency Response 60Hz - 30kHz
Impedance (nominal) 8 Ohms
Sensitivity (1W@1M) 88dB
Maximum SPL (single unit in free space) 108 dBA
Power Handling (R.M.S) 100 W
Recommended Amp Requirements 30 - 100 W
Drive Unit Complement 2 x 5" C-CAM® cone bass driver. 1 x
1" (25mm) C-CAM® pivoting gold dome tweeter
White Grill
Acoustic Configuration 2-Way
Overall Frame Dimensions 165.8 x 373.6mm - without grille
177.4 x 385.2mm - with grille
Mounting Depth 100.2mm
Cut-out Hole Dimensions Minimum 145 x 353mm
Required Clearance for Doglegs in Centre Configuration 400
x 197mm
Construction Material Mineral filled ABS, RoHS compliant
Adet
B
250 £
Çift
B
75 £
Çift
B
75 £
Çift
B
75 £
Çift
B
75 £
Adet
B
140 £
Adet
B
200 £
Adet
B
300 £
Adet
B
360 £
Adet
B
180 £
Custom Install
SCPC120B
Series 100 CP
Ceiling 2"
SCPC120C
Series 100 CP
Ceiling 2"
SCPC120S
Series 100 CP
Ceiling 2"
SCPC120W
Series 100 CP
Ceiling 2"
SCPCT150
CP-CT150 Cumstom
Install
SCPCT260
CP-CT260
Cumstom Install
SCPCT380
CP-CT380
Cumstom Install
SCPCT380IDC
CP-CT380 IDC In
Ceiling
SCPWT150
CP-WT150
Frequency Response 100 Hz – 20 KHz
Impedance (Nominal) 8 Ohms
Brass
Sensitivity (1W@1M) 85 dB
Maximum SPL 101.9 dBA
Recommended Crossover frequency 200 Hz
Power Handling 20 W 50 W (using crossover)
Chrome
Recommended Amp Requirements 5 - 20 W 5 - 50 W (using
crossover)
Drive Unit Complement 2” Full range micro-driver
Overall Diameter 80 mm
Brushed
Overall Depth 96 mm
Steel
Cut-Out Hole Diameter 65 mm
Mounting Depth 91.5 mm
Fixing Type 2 x Spring clip fixings
White
Connection Gold plated "push" type terminals
Enclosure Material; Steel Bezel Aluminium
Frequency Response 75 Hz - 25 kHz
Impedance (Nominal) 6 Ohms
Sensitivity (1W@1M) 85 dB
Maximum SPL 102.8 dBA
Power Handling (RMS) 50 W
Recommended Amp Requirements 20 - 50 W
Black Body
Crossover Frequency / Slope 2.8 kHz @ 12 dB / Octave
White Grill
Drivers Unit Complement 2-Way 5” MMP®II cone bass
driver 1” C-CAM® pivoting gold dome tweeter
Overall Diameter:(including grille) 250 mm
Overall Depth:(including grille) 155mm
Cut Out Diameter 212mm
Mounting Depth 151mm
Frequency Response 66Hz - 25kHz
Impedance (Nominal) 6 Ohms
Sensitivity (1W@1M) 88 dB
Maximum SPL 106.9 dBA
Power Handling (RMS) 65 W
Recommended Amp Requirements 20 - 65 W
Black Body
Crossover Frequency / Slope 2.6 kHz @ 12 dB / Octave
White Grill
Drivers Unit Complement 2-Way 6˝ C-CAM® cone bass
driver 1˝ C-CAM pivoting gold dome tweeter
Overall Diameter:(including grille) 285 mm
Overall Depth:(including grille) 155mm
Cut Out Diameter 244mm
Mounting Depth 151mm
Frequency Response 50Hz - 25kHz
Impedance (Nominal) 6 Ohms
Sensitivity (1W@1M) 89 dB
Maximum SPL 109.6 dBA
Power Handling (RMS) 120 W
Recommended Amp Requirements 30 - 120 W
Black Body
Crossover Frequency / Slope 2.5 kHz @ 12dB / Octave
Drivers Unit Complement 2-Way 8˝ C-CAM® RST® cone bass White Grill
driver 1˝ C-CAM pivoting gold dome tweeter
Overall Diameter:(including grille) 309 mm
Overall Depth:(including grille) 187mm
Cut Out Diameter 274mm
Mounting Depth 172.80mm
Frequency Response 50Hz - 25kHz
Impedance (Nominal) 6 Ohms
Sensitivity (1W@1M) 89 dB
Maximum SPL 109.6 dBA
Power Handling (RMS) 120 W
Recommended Amp Requirements 30 - 120 W
Crossover Frequency / Slope 2.5 kHz @ 12dB / Octave
Drivers Unit Complement 2-Way 8˝ C-CAM® RST® cone bass
driver 1˝ C-CAM pivoting gold dome tweeter
Overall Diameter:(including grille) 309 mm
Overall Depth:(including grille) 187mm
Cut Out Diameter 274mm
Mounting Depth 172.80mm
Frequency Response 75 Hz - 25 kHz
Impedance (Nominal) 6 Ohms
Sensitivity (1W@1M) 85 dB
Maximum SPL 102.8 dBA
Power Handling (RMS) 50 W
Recommended Amp Requirements 20 - 50 W
Crossover Frequency / Slop 2.8 kHz @ 12 dB / Octave
Drivers Unit Complement 2-Way 5” MMP®II cone bass
driver 1” C-CAM® pivoting gold dome tweeter
Overall Dimensions:(including grille) (H x W) 360.5 x 242
mm
Overall Depth:(including grille) 102 mm
Cut Out Dimensions:(H x W) 326 x 207 mm
Mounting Depth 96 mm
Black Body
White Grill
SCPWT260
SCPWT380
CP-WT260
Cumstom Install
CP-WT380
SCPWT380IDC
CP-WT380IDC
Cumstom Install
SCPWT140LCR
CP-WT140LCR
Cumstom Install
SCPWT240LCR
CP-WT240LCR
Custom Install
SCPIW260X
CP-WT260
Custom Install
Frequency Response 65 Hz - 25 kHz
Impedance (Nominal) 6 Ohms
Sensitivity (1W@1M) 88 dB
Maximum SPL 106.9 dBA
Power Handling (RMS) 65 W
Recommended Amp Requirements 20 - 65 W
Crossover Frequency / Slope 2.6 kHz @ 12 dB / Octave
Black Body
Drivers Unit Complement 2-Way 6˝ C-CAM® cone bass
White Grill
driver 1˝ C-CAM pivoting gold dome tweeter
Overall Dimensions:(including grille) (H x W) 415 x 262.5 mm
Overall Depth:(including grille) 102 mm
Cut Out Dimensions:(H x W) 381 x 228 mm
Mounting Depth 96 mm
Frequency Response 50 Hz - 25 kHz
Impedance (Nominal) 6 Ohms
Sensitivity (1W@1M) 89 dB
Maximum SPL 109.6 dBA
Power Handling (RMS) 120 W
Recommended Amp Requirements 30 - 120 W
Crossover Frequency / Slope 2.5 kHz @ 12 dB / Octave
Drivers Unit Complement 2-Way 8” C-CAM® RST® cone
bass driver 1” C CAM pivoting gold dome tweeters
Overall Dimensions:(including grille) (H x W) 472.5 x 303.5
mm
Overall Depth:(including grille) 106 mm
Cut Out Dimensions:(H x W) 438 x 269 mm
Mounting Depth 99 mm
Frequency Response 50 Hz - 30 kHz
Impedance (Nominal) 6 Ohms
Sensitivity (1W@1M) 89 dB
Maximum SPL 109.6 dBA
Power Handling (RMS) 120 W
Recommended Amp Requirements 30 - 120 W
Crossover Frequency / Slope Bass low pass: 300 Hz @ 6 dB /
Octave Mid: 300 Hz @ 6 dB / Octave & 3 kHz @ 12 dB /
Octave
Drivers Unit Complement 3-Way 8˝ C-CAM® RST® cone bass
driver 4˝ C-CAM IDC® cone mid range drive 1˝ C-CAM gold
dome tweeter
Overall Dimensions:(including grille) (H x W) 472.5 x 303.5
mm
Overall Depth:(including grille) 106 mm
Cut Out Dimensions:(H x W) 438 x 269 mm
Mounting Depth 99 mm
Frequency Response 60 Hz - 25 kHz
Impedance (Nominal) 6 Ohms
Sensitivity (1W@1M) 88 dB
Maximum SPL 108.8 dBA
Power Handling (RMS) 100 W
Recommended Amp Requirements 20 - 100 W
Crossover Frequency / Slope 2.6 kHz @ 12 dB / Octave
Drivers Unit Complement 2 x 4” MMP®II cone bass driver 1”
C-CAM® pivoting gold dome tweeter
Overall Dimensions: (inc grille) (H x W) 217 x 333 mm
Overall Depth:(including grille) 103 mm
Cut Out Dimensions:(H x W) 183 x 299 mm
Mounting Depth 97 mm
Adet
B
250 £
Black Body
White Grill
Adet
B
360 £
Black Body
White Grill
Adet
B
420 £
Black Body
White Grill
Adet
B
225 £
Adet
B
300 £
Adet
B
850 £
Frequency Response 60 Hz - 25 kHz
Impedance (Nominal) 6 Ohms
Sensitivity (1W@1M) 88 dB
Maximum SPL 108.8 dBA
Power Handling (RMS) 100 W
Black Body
Recommended Amp Requirements 20 - 100 W
White Grill
Crossover Frequency/Slope 2.6 kHz @ 12 dB/Octave
Drivers Unit Complement 2 x 4” C-CAM® cone bass driver 1”
C-CAM pivoting gold dome tweeter
Overall Dimensions: (including grille) (H x W x D)
217 x 333 x 103 mm
Cut Out Dimensions:(H x W x D) 183 x 299 x 97 mm
Frequency Response 65 Hz - 25 kHz
Impedance (Nominal) 6 Ohms
Sensitivity (1W@1M) 89 dB
Maximum SPL 106.9 dBA
Power Handling (RMS) 65 W
Recommended Amplifier 20 - 65 W
Crossover Frequency / Slope Bass low pass: 300 Hz @ 6 dB /
OEM
Octave & 2,6 kHz @ 12 dB / Octave
Drivers Unit Complement 2-Way 6˝ C-CAM® RST® cone bass
driver 1˝ C-CAM gold dome tweeter
Overall Dimensions:(inc grille) (H x W) 415 x 262.5 mm
Overall Depth:(including grille) 102 mm
Cut Out Dimensions: (H x W) 381 x 228 mm
Mounting Depth 96 mm
SCPIW460X
CP-WT460
Custom Install
SCPPLW
PLATINIUM PL II
Inwall Custom
Install
Frequency Response : 50Hz - 30kHz (-6dB in room)
Impedance (Nominal) 6Ω
Sensitivity (1W@1M) 89dB
Maximum SPL (@1M. Installed/in room) 113.8 dBA
Power Handling (RMS) 150W
Recommended Amp Requirements 60 - 150W
Crossover Frequency / Slope : L.F - 500Hz @ 12dB/Octave
M.F -500Hz @ 12dB/Octave. 3KHz @ 18dB/Octave H.F 3KHz @ 18dB/Octave
Drivers Unit Complement: 2 x 6.5” C-CAM® Bass drivers 2 x
4” C-CAM Mid-range drivers both with RST cone technology
1 x C-CAM H.F ribbon transducer
Adjustment Controls
Boundary Compensation (On/Off) MF Level: +1/0/-1 (dB) HF
Level: +1/0/-1 (dB)
Overall Dimensions:(including grille) (H x W x D)
907 x 257 x 102 mm (35 3/4” x 10 1/8” x 4”)
Cut Out Dimensions:(H x W x D) : 880 x 230 x 96 mm
Fixing Type 10 x Tri-Grip® Dog leg fixings
Construction Material : Cast Polymer enclosure with die-cast
Aluminium baffle (RoHS2 Compliant)
Weight : 12.98kg (28lb 6oz)
Cable Connection : High quality bi-wire terminals
System Format : 3 Way - 4 Driver
Frequency Response (-6dB) : 52Hz - 100kHz
Sensitivity (1W@1M) : 90dB
Maximum S.P.L. : 117dBA (pair)
Nominal Impedance : 4Ω (3.7Ω min. @ 2.8KHz)
Power Handling (RMS) : 200W
Recommended Amplifier (RMS) : 100 - 200W
Cabinet Design : Sealed Cabinet
Drive Unit Complement : 2 x 61/2" RDT®II bass drivers
1 x 4" RDT II mid-range driver, 1 x MPD high frequency
transducer
Mid/ H.F Crossover Frequency (Hz) : 4.1KHz 3rd Order
(18dB/Octave) Bass/Midrange Crossover Frequency (Hz) :
700Hz/ 2nd Order (12dB/Octave)
Fixings : 10 x Tri-Grip™ dog leg type fixing system
Overall Dimensions (H x W x D)
1205 x 330 x 102 mm (477/16 x 13 x 4 inch)
Cut Out Depth 97.5mm (313/16 In.)
Weight (each) 27KG (59.4lb)
OEM
Adet
B
1.300 £
OEM
Adet
B
3.150 £
Black Body
White Grill
Adet
B
350 £
Black Body
Adet
B
150 £
Black
Adet
B
350 £
OEM
Adet
B
300 £
InWall Subwoofer Series
IWS10
IWS-10
Custom Install
IWB10
IWB-10
Custom Install
IWA250
IWA-250
Custom Install
Frequency Response 28 Hz – 120 Hz (when mounted in
optimum enclosure)
Impedance (Nominal) 8 Ohms
Sensitivity (1W@1M) 86 dB
Maximum SPL (Partnered with IWA-250) Single unit 109.8
dB; Pair 115.8 dB
Power Handling 150 W
Cut-Out Hole Dimensions 280 x 280 mm
Mounting Depth 89.98 mm (3 1/2 inches)
Connection Gold plated "push" type terminals
Construction Materials Mineral Filled ABS Plastic (RoHS2
Compliant)
Dimensions (H x W x D) 324 x 324 x 25.6 mm
Internal Volume 16.5 Litres
Dimensions (H x W x D) 850 x 351 x 85 mm
Construction Materials MDF (CARB level 2 approved)
Construction 3mm thick fabricated steel case, moulded ABS
front trim panel
Low Frequency Response 25 Hz-120 Hz
Maximum Power Output 250 W @ 4 Ohms
Dimensions (H x W x D) 43.7 x 432 x 263mm
Professional In Ceiling Series
SPROIC65
Pro- In Ceiling 6.5"5 piece carton
Frequency Response 60Hz - 25kHz
Impedance 6 Ohms
Sensitivity (1W@1m) 87dB
Maximum SPL 105dBA
Power Handling (RMS) 60W
Recommended Amp Requirements 20 - 60W
Drive Unit Complement
1" C-CAM® tweeter
6.5" MMP®II driver
Cut-out Diameter: 203 mm +1 mm clearance
Depth surround/frame to magnet: 74.3 mm
Depth including surround/frame: 79.8 mm
Depth including grille: 85.2 mm
Diameter including surround/frame: 240 mm
SPROIC80
Pro- In Ceiling 8"-5
piece carton
BPROIC65
BPROIC65
BCB4
BCB5
BCB6
BCB8
BCB10
BWB5
BWB6
BWB8
BWB10
BWB4LCR
BWB5LCR
G20PKCT6SQ
G20PKCT8SQ
G20PKCPCT8SQ
MASMS
Pro IC 65
Pro IC 80
CB4
CB5
CB6
CB8
CB10
WB5
WB6
WB8
WB10
WB4LCR
WB5LCR
Grille
Grille
Grille
UWB
BSB
SB
Frequency Response 50Hz - 25kHz
Impedance 6 Ohms
Sensitivity (1W@1m) 88.5 dB
Maximum SPL 107.5dBA
Power Handling (RMS) 100W
Recommended Amp Requirements 30 - 100W
Drive Unit Complement
1" C-CAM® tweeter
8" MMP®II driver
Cut-out Diameter: 244 mm +1 mm clearance
Depth surround/frame to magnet: 90.7 mm
Depth including surround/frame: 96.7 mm
Depth including grille: 102.6 mm
Diameter including surround/frame: 279.5 mm
OEM
Adet
B
375 £
Pre Construction Bracket - 20 pc carton
Pre Construction Bracket - 20 pc carton
Pre Construction Bracket
Pre Construction Bracket
Pre Construction Bracket
Pre Construction Bracket
Pre Construction Bracket
Pre Construction Bracket
Pre Construction Bracket
Pre Construction Bracket
Pre Construction Bracket
Pre Construction Bracket
Pre Construction Bracket
OEM
Adet
B
OEM
Adet
B
OEM
Adet
A
OEM
Adet
A
OEM
Adet
A
OEM
Adet
A
OEM
Adet
A
OEM
Adet
A
OEM
Adet
A
OEM
Adet
A
OEM
Adet
A
OEM
Adet
A
OEM
Adet
A
CT 6.5" & CPCT150 Square grille
OEM
Adet
A
CT 8" & CPCT260 Square grille
OEM
Adet
A
CP-CT380 / 380IDC Square grille
OEM
Adet
A
Universal Wall Bracket
OEM
Adet
A
200 £
200 £
20 £
20 £
20 £
20 £
20 £
20 £
20 £
20 £
20 £
20 £
20 £
280 £
420 £
420 £
25 £
Soundbar Bracket - AB2, SB2 & SB3
OEM
Adet
A
28 £
Black
Adet
A
280 £
White
Adet
A
280 £
Black
Adet
A
400 £
Consumer Electronic Series
AS150B
Airstream S150
AS150W
SB2B
Soundbar ASB2
Home Theather
Frequency Response : 80Hz - 25kHz
Maximum SPL (each @ 1M) : 99dBA
Power Output (RMS) : 2 x 25 W Bass,10 W Tweeter
Drive Complement : 2 x 3" bass drivers with C-CAM® metal
cone technology, 1" Gold C-CAM dome tweeter
System Configuration : 'Race-track' profile ABR (Auxiliary
Bass Radiator) rear mounted
Auxiliary Input Impedance/Sensitivity:10kOhms/300mV
Signal to Noise Ratio : 92dB
A.C. Input Voltage : 90-264V (auto-range)
Amplifier : Category Class D
Power Consumption : 0.3 w (standby), 40 w (max)
Models Supported : iPhone 6, iPhone 6 Plus, iPhone 5s,
iPhone 5c, iPhone 5, iPhone 4s, iPhone 4, iPhone 3GS,
iPhone 3G, iPhone, iPod touch (1st through 5th generation),
iPod nano (2nd through 7th generation), iPod classic
(2009), iPod classic (2007), iPod classic
Works With Any Bluetooth Device
Bluetooth Version : 4.0 with aptX support
Dimensions (H x W x D) : 274 x 120 x 137mm
Colour/Finish : Charcoal Grey with black grille cloth / White
with light grey grille cloth
Approvals : ETL/ CE/ Fcc/CB/ Erp
Weight (each) : 2.26 kg
Inputs 3 x HDMI inputs Digital coaxial input (S/PDIF) Digital
optical input (Toslink) Analogue stereo RCA inputs, 3.5mm
Jack (auto-sensing between each input, via analogue
switch)
Outputs: HDMI output (supporting ARC) RCA LFE subwoofer output (auto sensing changes filter/crossover
settings)
Frequency Range 40Hz - 20kHz
Drive unit complement 2 x 51/2” (140mm) C-CAM
subwoofers 2 x 4” (100mm) C-CAM midrange drivers 2 x 1”
(25mm) Gold Dome C-CAM tweeters
Amplifier Power Output 160W
Connectivity Wireless AirPlay/ DLNA / UPnP music
streaming
Power input voltage universal 100 - 240Vac, 50 - 60Hz
Weight (each) 25lbs 6oz (11.52Kg)
Rated Power consumption 200W
Standby power consumption <0.5W (increased to 20W
when HDMI passthrough is enabled)
Decodes: Stereo 5.1 Linear PCM 7.1 Linear PCM
Dimensions inc grille, excluding rubber base (HxWxD) 180 x
1005 x 167mm
SB3B
Soundbar ASB3
Home Theather
Inputs 3 x HDMI inputs Digital coaxial input (S/PDIF) Digital
optical input (Toslink) Analogue stereo RCA inputs, 3.5mm
Jack (auto-sensing between each input, via analogue
switch)
Outputs: HDMI output (supporting ARC) RCA LFE subwoofer output (auto sensing changes filter/crossover
settings)
Frequency Range 40Hz - 20kHz
Drive unit complement 2 x 51/2” (140mm) C-CAM
subwoofers 2 x 4” (100mm) C-CAM midrange drivers 2 x 1”
(25mm) Gold Dome C-CAM tweeters
Amplifier Power Output 160W
Connectivity Wireless AirPlay/ DLNA / UPnP music
streaming
Power input voltage universal 100 - 240Vac, 50 - 60Hz
Weight (each) 25lbs 6oz (11.52Kg)
Rated Power consumption 200W
Standby power consumption <0.5W (increased to 20W
when HDMI passthrough is enabled)
Decodes: Stereo 5.1 Linear PCM 7.1 Linear PCM
Dimensions inc grille, excluding rubber base (HxWxD) 180 x
1005 x 167mm
Black
Adet
A
500 £
Black
Çift
A
250 £
White
Çift
A
250 £
Black
Çift
A
350 £
White
Çift
A
350 £
Black
Adet
A
200 £
White
Adet
A
200 £
Black
Çift
A
450 £
White
Çift
A
450 £
Climate Series
SCL50B
Climate 50
Outdoor Speakers
SCL50W
SCL60B
Climate 60
Outdoor Speakers
SCL60W
SCL60T2B
Climate 60 T2
Outdoor Speakers
SCL60T2W
SCL80B
Climate 80
Outdoor Speakers
SCL80W
Not: Tüm Fiyatlara KDV ilave edilecektir.
Frequency Response 75Hz - 30KHz
Sensitivity (1W@1m) 87 dB
Impedance (nominal) 8 Ohms
Maximum S.P.L dBA (per pair) 106.8
Power Handling (RMS) 80W
Amplifier (RMS) 10-80W
Drivers 1 x 140mm (5 1/2”) C-CAM® bass/ mid-range driver 1
x 25mm (1”) C-CAM® gold dome tweeter
Ext Dimensions: (H x W x D) 285 x 172.5 x 158.5 mm
Total Depth Including Wall Bracket (inches) 210 mm
Frequency Response 63Hz - 30KHz
Sensitivity (1W@1m) 88 dB
Impedance (nominal) 8 Ohms
Maximum S.P.L dBA (per pair) 108.8
Power Handling (RMS) 100W
Amplifier (RMS) 15 - 100W
Drivers 1 x 165mm (6 1/2”) C-CAM® bass/ mid-range driver 1
x 25mm (1”) C-CAM® gold dome tweeter
External Dimensions: (H x W x D) 325 x 185 x 178.5 mm
Total Depth Including Wall Bracket 235 mm
Frequency Response 63Hz - 30KHz
Sensitivity (1W@1m) 88 dB
Impedance (nominal) 2 x 8 Ohms
Maximum S.P.L dBA (per pair) 108.8
Power Handling (RMS) 2 x 50W
Amplifier (RMS) 15 - 100W
Drivers 1 x 165mm (6 1/2”) C-CAM® bass/ mid-range driver
with dual voice coil. 2 x 25mm (1”) C-CAM® gold dome
tweeter
External Dimensions: (H x W x D) 325 x 185 x 178.5 mm
Total Depth Including Wall Bracket 235 mm
Frequency Response 50Hz - 30KHz
Sensitivity (1W@1m) 89.5 dB
Impedance (nominal) 8 Ohms
Maximum S.P.L dBA (per pair) 111.1
Power Handling (RMS) 120W
Amplifier (RMS) 20 - 120W
Drivers 1 x 203mm (8”) C-CAM® bass/ mid-range driver 1 x
25mm (1”) C-CAM® gold dome tweeter
External Dimensions: (H x W x D) 405 x 230 x 221 mm
Total Depth Including Wall Bracket 272.5 mm