Z Makina AS

Transkript

Z Makina AS

Z Makina Teknolojisi A.Ş.Türkiye'nin ve dünyanýn sayýlý delici
ekipman ve zemin teknolojisi üreten firmalarýndan biri olma
hedefi ile kuruldu.
Z Makina Teknolojisi A.Ş., uzman makina mühendislerinin
önderliðinde, tecrübeli teknikerleri, kaynakçýlarý, operatörleri ve
iþçileri ile hedefi doðrultusunda emin adýmlarla ilerlemektedir.
Z Makina Teknolojisi A.Ş.kuruluþundan bu yana ciddi mesafe kat
etmiþ olup zemin makinalarý konusunda uygulamadan aldýðý
tecrübeyi makina imalatýna aktarmýþ ve yýllar içersinde hem
yurtiçi hem de yurtdýþýna makina imalatý yapmýþtýr.
Deðerli müþterilerimiz, bu doðrultuda sizleri Z Makina Teknolojisi A.Ş.'nin zemin teknolojisi geliþtiren ve üreten dünyasýna bekliyoruz.
Z Makina Teknolojisi A.Ş. was founded with the goal of being one
of the Turkey’s and world’s leading companies in the drilling
equipments and foundation technologies.
Z Makina Teknolojisi A.Ş. is progressing with certain steps to its
target under the leadership of expert mechanical engineers,
experienced technicians, welders, operators and workers.
Z Makina Teknolojisi A.Ş. has made serious progress since its
foundation. The experience have been acquired by the application
was put into producing machines. And through the years they
have produced for the domestic and foreign countries.
Our valued customers, In this way, we expect you to the ground
technologies developing and producing world.
Mekanik Grab/Mechanical Grap
ZMG-S ve ZMG-L olmak üzere iki farklý tipte sunulmuþtur.
Ana þase sabit kalmak koþuluyla çene ve klavuz
deðiþtirilerek farklý ölçüde kazý yapma imkaný
saðlar.
Çeneler düz ve yuvarlak olarak iki farklý tipte seçilebilmektedir.
Tüm makaralar bakým gerektirmeyen ve uzun ömür
saðlayan life-time keçeler ve rulmanlý sistemle
üretilmiþtir.
Aþýnmaya maruz yüzeyler Hardox 500 malzemeden
imal edilmiþtir.
Mukavemet gerektiren þase ve kollar Weldox 700
malzemeden üretilmiþtir.
Klavuz ve tutucular S 355 malzemeden üretilmiþtir.
Presented as two different types as being ZMG-S
and ZMG-L.
Provided that the main chassis will be stable, it
enables to make excavation with different sizes by
replacing the jaws and guides.
Jaws can be selected as two different types as being
flat and round.
All the pulleys are manufactured by maintenance
free durable life-time felts and bearing system.
Surfaces exposed to abrasion are manufactured by
Hardox 500 material.
Chassis and arms that require endurance are
manufactured by Weldox 700 material.
Guides and holders are manufactured by S 355
material.
ZMG 400S
BODY WEIGHT
Extention 450
Extention 450
Extention 500
Extention 500
Extention 2800
Extention 2800
JAWS OPENING
Jaws Width
Jaws Weight
TOTAL LENGTH
Total Weight
Total Weight
ZMG 600S
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
kg
kg
kg
kg
kg
kg
kg
mm
mm
mm
mm
mm
mm
7.400
480
2.200
760
4.200
920
4.800
2500
400
1320
450
1600
8.720
8.720
9.480
11.200
2800
500
400
1720 1480
7800
9.880 9.800
13.320 13.680
450
1720
500
1900
10.520
16.120
10.980
18.300
BODY WEIGHT
Extention 800
Extention 800
Extention 1000
Extention 1000
Extention 2800
Extention 2800
JAWS OPENING
Jaws Width
Jaws Weight
TOTAL LENGTH
Total Weight
Total Weight
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
kg
kg
kg
kg
kg
kg
kg
mm
mm
mm
mm
mm
mm
9.030
560
3.370
1.000
6.270
1.170
5.340
2500
600
1.530
800
2.220
10.560
10.560
11.810
14.620
2800
1000 600
2.540 1.860
7800
12.570 12.060
17.840 16.230
800
2.620
1000
3.060
13.380
20.360
14.260
23.700
ZMG 800S
BODY WEIGHT
Extention 1000
Extention 1000
Extention 1200
Extention 1200
Extention 3400
Extention 3400
JAWS OPENING
Jaws Width
Jaws Weight
TOTAL LENGTH
Total Weight
Total Weight
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
kg
kg
kg
kg
kg
kg
kg
mm
mm
mm
mm
mm
mm
10.400
1.000
3.370
1.840
6.270
1.670
10.190
2500
800
2220
1000
2540
12.620
12.620
13.940
16.310
2800
1200 800
3440 3110
7800
15.680 15.180
20.110 23.700
1000
3510
1200
3900
16.580
27.470
17.810
30.760
ZMG 1000S
BODY WEIGHT
Extention 1200
Extention 1200
Extention 1500
Extention 1500
Extention 3400
Extention 3400
JAWS OPENING
Jaws Width
Jaws Weight
TOTAL LENGTH
Total Weight
Total Weight
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
kg
kg
kg
kg
kg
kg
kg
mm
mm
mm
mm
mm
mm
11.600
1.000
3.370
2.140
7.550
1.670
10.200
2800
1000
2540
1200
3440
14.140
14.140
16.040
18.410
3400
1500 1000
4460 3510
7800
18.200 16.780
23.610 25.310
1200
3900
1500
5020
18.170
29.070
20.430
34.370
ZMG 1200S
BODY WEIGHT
Extention 1500
Extention 1500
Extention 1700
Extention 1700
Extention 3400
Extention 3400
JAWS OPENING
Jaws Width
Jaws Weight
TOTAL LENGTH
Total Weight
Total Weight
ZMG 1500S
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
kg
kg
kg
kg
kg
kg
kg
mm
mm
mm
mm
mm
mm
15.045
1.140
4.870
2.140
7.550
1.670
10.190
2800
1200
3440
1500
4460
18.485
18.485
20.645
24.375
3400
1700 1200
4920 3900
7800
22.105 20.615
27.515 29.135
1500
5020
1700
5200
22.875
35.125
24.055
37.985
BODY WEIGHT
Extention 1700
Extention 1700
Extention 2000
Extention 2000
Extention 3400
Extention 3400
JAWS OPENING
Jaws Width
Jaws Weight
TOTAL LENGTH
Total Weight
Total Weight
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
kg
kg
kg
kg
kg
kg
kg
mm
mm
mm
mm
mm
mm
16.320
2.140
7.550
2.400
9.200
1.670
10.190
2800
1500
4460
1700
4920
20.780
20.780
23.380
28.790
3400
2000
5400
1500
5020
7800
24.120 23.010
30.920 31.530
1700
5200
2000
5750
25.330
39.260
26.140
41.460
ZMG 400L
BODY WEIGHT
Extention 450
Extention 450
Extention 500
Extention 500
Extention 2800
Extention 2800
JAWS OPENING
Jaws Width
Jaws Weight
TOTAL LENGTH
Total Weight
Total Weight
ZMG 600L
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
kg
kg
kg
kg
kg
kg
kg
mm
mm
mm
mm
mm
mm
8.720
480
2.200
760
4.200
920
4.800
2500
400
1320
450
1600
10.040
10.040
10.800
12.520
2800
500
400
1720 1480
10000
11.200 11.120
14.640 15.000
450
1720
500
1900
11.840
17.440
12.300
19.620
BODY WEIGHT
Extention 800
Extention 800
Extention 1000
Extention 1000
Extention 2800
Extention 2800
JAWS OPENING
Jaws Width
Jaws Weight
TOTAL LENGTH
Total Weight
Total Weight
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
kg
kg
kg
kg
kg
kg
kg
mm
mm
mm
mm
mm
mm
10.620
560
3.370
1.000
6.270
1.170
5.340
2500
600
1.530
800
2.220
12.150
12.150
13.400
16.210
2800
1000 600
2.540 1.860
10000
14.160 13.650
19.430 17.820
800
2.620
1000
3.060
14.970
21.950
15.850
25.290
ZMG 800L
BODY WEIGHT
Extention 1000
Extention 1000
Extention 1200
Extention 1200
Extention 3400
Extention 3400
JAWS OPENING
Jaws Width
Jaws Weight
TOTAL LENGTH
Total Weight
Total Weight
ZMG 1000L
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
kg
kg
kg
kg
kg
kg
kg
mm
mm
mm
mm
mm
mm
12.270
1.000
3.370
1.840
6.270
1.670
10.190
2800
800
2220
1000
2540
14.490
14.490
15.810
18.180
3400
1200 800
3440 3110
10000
17.550 17.050
21.980 25.570
1000
3510
1200
3900
18.450
29.340
19.680
32.630
BODY WEIGHT
Extention 1200
Extention 1200
Extention 1500
Extention 1500
Extention 3400
Extention 3400
JAWS OPENING
Jaws Width
Jaws Weight
TOTAL LENGTH
Total Weight
Total Weight
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
kg
kg
kg
kg
kg
kg
kg
mm
mm 1000
mm 2540
mm
mm 16.190
mm 16.190
13.650
1.000
3.370
2.140
7.550
1.670
10.200
2800
1200
3440
18.090
20.460
3400
1500 1000
4460 3510
10000
20.250 18.830
25.660 27.360
1200
3900
1500
5020
20.220
31.120
22.480
36.420
ZMG 1200L
BODY WEIGHT
Extention 1500
Extention 1500
Extention 1700
Extention 1700
Extention 3400
Extention 3400
JAWS OPENING
Jaws Width
Jaws Weight
TOTAL LENGTH
Total Weight
Total Weight
ZMG 1500L
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
kg
kg
kg
kg
kg
kg
kg
mm
mm
mm
mm
mm
mm
17.700
1.140
4.870
2.140
7.550
1.670
10.190
2800
1200
3440
1500
4460
21.140
21.140
23.300
27.030
3400
1700 1200
4920 3900
10000
24.760 23.270
30.170 31.790
1500
5020
1700
5200
25.530
37.780
26.710
40.640
BODY WEIGHT
Extention 1700
Extention 1700
Extention 2000
Extention 2000
Extention 3400
Extention 3400
JAWS OPENING
Jaws Width
Jaws Weight
TOTAL LENGTH
Total Weight
Total Weight
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
kg
kg
kg
kg
kg
kg
kg
mm
mm
mm
mm
mm
mm
19.200
2.140
7.550
2.400
9.200
1.670
10.190
2800
1500
4460
1700
4920
23.660
23.660
26.260
31.670
3400
2000 1500
5400 5020
10000
27.000 25.890
33.800 34.410
1700
5200
2000
5750
28.210
42.140
29.020
44.340
Hidrolik Grab/Hydraulic Grap
HİDROLİK GRAB
HYDRAULIC GRAB
Açýsal diklik kontrol sistemi (inclinometre) sayesinde kazýnýn
dik olarak yapýlmasý kontrol altýnda tutulur.
Operatör, kumanda panosundaki indikatörden bom açýsýný
sürekli takip edebilir.
Uzun klavuzlarý sayesinde kazý düþeyliðinin korunmasý
saðlanýr.
Yüksek grap aðýrlýðý, zemine dalmayý ve malzeme koparmayý
kolaylaþtýrýr.
50 tonluk mekanik veya hidrolik vince monte edilebilir.
Kafes bomlarý, grap ve klavuzlarý sökülebilir olduðu için nakliyesi kolaydýr.
Yüksek çene torku sayesinde daha hýzlý ve verimli kazý
yapýlabilir.
Çene ve klavuz sökülüp, deðiþik ebatlarda çene ve klavuzlar
kullanýlarak farklý geniþliklerde kazý yapmaya olanak saðlar.
The construction of excavation to be steep is kept under control
by vertical alignment control system (inclinometer).
Operator can continuously follow the boom angle from the
indicator on the panel board.
The preservation of the verticality of excavation is ensured by
its long guides.
High grab weight eases plunging on ground and cutting of
material.
Can be mounted on mechanic or hydraulic crane of 50 tons.
As the cage booms, grab and guides are demountable, its
transportation is easy.
By high jaw torque faster and more efficient excavation can be
made.
It enables to make excavations of different widths by demounting the current jaw and guides and using jaw and guides of
different sizes.
Hidrolik Grab/Hydraulic Grap
MODEL
TYPE
Kazı Genişiliği
Çene Açık Ölçüsü
Kazı Derinliği
Max. Zeminden Yükseklik
Kelly Uzunluğu
Min. Zeminden Yükseklik
Grap Ağırlığı
Kelly Ağırlığı
Grap Kapasitesi
Maksimum Çene Torku
Dönme Açısı
Hidrolik Güç Ünitesi
Güç
Maks. Debi Max.
Maks. Basınç
Çalışma Basıncı
Yağ Tankı Kapasitesi
Uzunluk
Genişlik
Yükseklik
Ağırlık
Excavation Width
Jaws Opening
Excavation Depth
Max. Height From Ground
Length of Kelly Bar
Min. Height from Ground
Weight of Grab
Kelly Weight
Grab Capacity
Max Jaw Torque
Turn Angle
Power Pack
Power
Flow
Peak Pressure
Working Pressure
Oil Tank Capacity
Length
Width
Height
Weight
mm
mm
m
mm
mm
mm
kg
kg
It
kN
o
KW/HP
It/min
bar
bar
It
mm
mm
mm
kg
ZHG K19H
ZHG K19F
600-1200
2800
55
19000
13000-15000
6000
5000-8000
6000-10000
1250-3200
1900
±45
600-1200
2800
55
19000
13000-15000
6000
5000-8000
6000-10000
1250-3200
1900
± 180
ZHP 300
220/300
348
350
320
800
4400
1600
2400
4500
Kaşık/Bored Pile Grap
Makaralý sistem ve çatallý sistem olmak üzere iki farklý tipte
sunulmuþtur.
Maksimum kapma kapasitesinin yanýnda boþaltma hýzlý ve
kolaydýr.
Kaþýk kazýk yapýmýnda kullanýlan en önemli araçtýr ve sondajýn
ilerlemesini belirler.
Bütün yapýnýn gerilmeleri giderilmiþ ve çok güçlüdür.
Aþýnmaya maruz yüzeyler Hardox 500 malzemeden imal
edilmiþtir.
Mukavemet gerektiren þase ve kollar Weldox 700 malzemeden üretilmiþtir.
Klavuz ve tutucular S 355 malzemeden üretilmiþtir.
Presented as two different types as being pulley and x-linked
system.
Besides maximum capacity of grabbing, emptying of the grab
jaws is rapid and easy.
The hammer grab is the most important tool in pile construction and it determines the drilling progress.
The entire construction is stress relieved and extremely
strong.
Surfaces exposed to abrasion are manufactured by Hardox 500
material.
Chassis and arms that require endurance are manufactured
by Weldox 700 material.
Guide and holders are manufactured by S 355 material.
X-LINKED TYPE
Model Type
ZKL1000
ZKL1200
ZKL1300
ZKL1500
ZKL1600
ZKL1800
ZKL2000
ZKL2200
ZKL 2500
Ağız Açıklığı
Jaws Opening
mm
Uzunluk
Length
mm
Kapasite
Capacity
lt
Ağırlık
Weight
kg
1000
1200
1300
1500
1600
1800
2000
2200
2500
4000
4400
4500
4700
4970
5430
5600
5700
6830
450
600
850
1100
1250
1700
1800
1900
2400
3500
4500
6800
7400
7900
9600
10000
12300
14000
PULLEY TYPE
Model Type
Type
ZKP 600
ZKP640
ZKP 690
ZKP 770
ZKP 850
ZKP 890
ZKP 970
ZKP1050
ZKP1070
ZKP1140
ZKP1170
Ağız Açıklığı
Jaws Opening
Uzunluk
Length
Kapasite
Capacity
Ağırlık
Weight
mm
Muhafaza
Borusu Çapı
Casing Diameter
mm
mm
lt
kg
600
640
690
770
850
890
970
1050
1070
1140
1170
720/640
750/670
800/720
880/800
980/900
1000/920
1180/1100
1180/1100
1180/1100
1250/1170
1300/1220
3650
3700
3750
3770
3785
3790
3800
3850
3900
3985
4000
55
60
70
90
110
125
150
200
250
300
310
1560
2000
2050
2400
2500
2600
3400
3450
3700
3750
3800
Wick Drain
Ýnþaat alanlarýnda, yer altý suyunun düþey drenajýný saðlamak
amacýyla, zemin iyileþtirme projelerinde uygulanýr.
Fitil dren özel tasarlanmýþ mandrel vasýtasý ile zemine
sürülür.
Konut ve büyük alýþveriþ merkezi gibi inþaat yapýlarý, yollar,
havaalaný pistleri, liman ve deniz inþaatý yapýmýnda kullanýlmak için tasarlanmýþtýr.
Zemin þartlarýna göre sadece statik baský veya hem statik
hem vibro çekiçli dizayn mevcuttur.
It is applied in ground improving projects in construction areas
in order to provide a vertical drainage for undersoil water.
Wick drain is specially designed to lay on the ground by
mandrel.
It is designed to use in construction works such as building
residences, malls, harbours, roads and runways for airports.
In respect of ground conditions static press or static press with
vibro design is existent.
Wick Drain
Description
Drain Depth Capacity
ZWD15
m
15
ZWD 20
20
ZWD 25
ZWD 30
25
30
m
18
23
28
33
lt/min
300
360
420
460
Pull Down Force
kN
321
321
321
335
Pull Up Force
kN
195
195
195
251
Pull Down Speed
m/sec
0,50
0,60
0,70
0,73
Pull Up Speed
m/sec
1,02
0,98
1,14
0,98
Height Of Mast
Required Oil Flow Approx. (Min)
Required Excavator
ton
30
45
60
70
Weight
kg
14.000
14.500
15.500
16.000
‘Dünyanın en büyük Havalimanı İnşaatı, İstanbul.
The world biggest airport jobsite, İstanbul.’
Wick Drain
Description
Drain Depth Capacity
ZWD 35
m
35
ZWD 40
40
ZWD 45
ZWD 50
45
50
m
38
43
48
53
lt/min
500
550
600
650
Pull Down Force
kN
335
335
335
335
Pull Up Force
kN
251
251
251
251
Pull Down Speed
m/sec
0,80
0,88
0,96
1,04
Pull Up Speed
m/sec
1,06
1,17
1,27
1,38
Height Of Mast
Required Oil Flow Approx. (Min)
Required Excavator
ton
90
100
110
120
Weight
kg
17.000
18.000
19.000
20.000
Wick Drain
Hidrolik Güç Ünitesi/Power Pack
ZHP Hidrolik güç üniteleri vince monteli hidrolik diyafram
makinasý, ekstraktör, dinamik test üniteleri, enjeksiyon
santralleri gibi harici ihtiyaç duyulan sistemlerde kullanýlmaktadýr.
ZHP Hydraulic power packs are used on externally needed
systems such as hydraulic diaphragm machine mounted on
crane, extractor, dynamic test units, and injection plants.
ZHP hidrolik güç üniteleri mühendislerden oluþan proje
departmanýyla titizlikle projelendirilir ve iç dizaynýnda yüksek
kaliteli malzemeler ve hidrolik ekipmanlar kullanýlýr.
ZHP hydraulic power packs are designed finically with the
project department composed of engineers and high quality
materials and hydraulic equipments are used on interior
design.
Üniteler her türlü vince kolayca monte edilebilecek þekilde
dizayn edilir ve ölçülendirilir. Kasa içi ses ve ýsý geçirgenliðine
karþý yalýtýlmýþtýr. Elektrik panosunda yüksek kalitede malzemeler kullanýlýr.
Power packs are designed and measured in order to be
mounted easily on all kinds of crane. It is isolated against noise
inside the case and thermal transmittance. High quality materials are used on the electrical system.
ZHP hidrolik güç üniteleri çok çeþitlidir ve çalýþma verimliliðine, ekonomik þartlara, isteðe ve ihtiyaca göre dizayn edilebilir.
ZHP hydraulic power packs are various and can be designed
according to work efficiency, economic conditions and requirements.
ZHP hidrolik güç üniteleri þantiye ve iç sahalarýnda birçok kez
denenmiþtir ve kazanýlan tecrübeler ile çalýþma verimliliði
artýrýlmýþ ve sistemlerin sürekli geliþmesi saðlanmýþtýr.
ZHP hydraulic power packs have been tested many times on
construction and work areas and working efficiency is
increased and continuous development of the systems is
ensured by the experience gained.
Hidrolik Güç Ünitesi/Power Pack
ZHP 200 ZHP 300 ZHP 400
ZHP 500
ZHP 600
220/300
295/400
368/500
155/620
230
348
470
580
720
280
350
350
350
350
350
250
320
320
320
320
320
MODEL
TYPE
Güç
Maks. Debi
Power
KW/HP
65/90
147/200
Max Flow
lt/min
94
Maks. Basınç
Max Pressure
bar
Çalışma Basıncı
Working Pressure
bar
Yağ Tank Kap.
Oil Tank Cap.
Length
Widht
Height
Weight
lt
mm
mm
mm
kg
Uzunluk
Genişlik
Yükseklik
Ağırlık
ZHP 100
400
600
800
1000
1200
400
2400
4000
4400
4600
4600
4800
1200
1700
2700
1500
1600
1700
1700
1800
2200
2400
2500
2500
2550
3500
4500
5000
5600
6200
Kum Eleği/Desander
Kum eleði üniteleri delgi sýrasýnda kullanýlan su-bentonit,
su-polimer, su-çimento veya farklý bentonit karýþýmlarýndan
yabancý maddeleri ayýrmak için kullanýlýr.
Kaba elekte 5 mm büyüklüðünde partiküller ayýklanýr.
Yatay ve dikey elekte 50 mikron (0,05 mm) oranýnda eleme
yapýlýr.
Hidrosiklon çýkýþlarýnda aþýnmaya dayanýklý döküm dirsekler
kullanýr.
Diðer kullaným alanlarý arasýnda çakýl iþleme olduðu gibi,
madencilik ve mikro tünelleme de yer almaktadýr.
Sand screen units are used to separate foreign substances
from water-bentonite, water-polymer, water-cement or different bentonite mixtures used during boring.
Particles of 5 mm size are cleaned out on coarse screen.
On horizontal and vertical screen elimination with 50 micron
(0,05 mm) rate is made.
Abrasion resistant foundry consoles are used on hydro cyclone
exits.
Desanding plants have further applications in gravel pits, in the
mining industry and in microtunneling projects.
Kum Eleği/Desander
1- Depo Tanký / Storage Tank
2- Siklon / Cyclone
3- Elenmemiþ malzeme giriþi / Feeding for treatment
4- Elenmiþ malzeme çýkýþý / Slurry after treatment
5- Pompa / Pump
6- Vibrasyon motorlarý / Vibro motors
7- Elenmiþ kaya ve toprak parçalarý / Excavated soil
MODEL
TYPE
Güç
Tank Kapasitesi
Kaba Elek
Yatay Elek
Dikey Elek
Siklon
Pompa Kapasitesi
Vibrasyon Motorları
Kum Oranı (İşlem Öncesi)
Kum Oranı (İşlem Sonrası)
Ölçüler
Ağırlık
Power
KW
Tank Capacity
It
Primary Screen
mm
Horizontal Screen
mm
Vertical Screen
mm
Cyclone
mm
Pump Capacity
m3/h
KW
Vibro Motors
Sand Content (Before Treatment) %
Sand Content (After Treatment) %
Sand Content (After Treatment) mm
mm
Weight
ZD50
ZD140
ZD250
15
1300
550x1595
550x1200
550x250
Ø300 mm
50
2x0,95
%9-10
%0,5-1,5
3400x1230x2500
1800
30
1800
640x1595
640x1200
640x250
Ø420 mm
140
2x1,1
%9-10
%0,5-1,5
3400x1230x2500
2200
55
2000
700x1595
700x1200
700x250
Ø450 mm
250
2x2
%9-10
%0,5-1,5
3950x1380x2500
2700
Bentonit Santrali/Betonite Plant
ZMB 150-S Operatör Kabini
ZMB 150-S geniþ ve rahat çalýþma ortamý saðlayan operatör
kabinine sahiptir.Kabin içine monteli 10.000 BTU klima ve
duvarlarýndaki yalýtým malzemesi sayesinde sýcak koþullarda
çalýþma verimliliðini artýrýr.
Uzaktan Kumanda Panosu
Operatör ZMB 150-S'in tüm fonksiyonlarýný kumanda panosu
vasýtasýyla kontrol edebilir, mikserin ne kadar malzeme
aldýðýný indikatörden okuyabilir ve oluþabilecek aksaklýklarý
yine pano üzerindeki uyarý ýþýklarýndan görebilir. ZMB 150-S
üzerindeki tüm vanalar pnömatik ve uzaktan kumanda panosundan kontrol edilir.
Su Tankı
ZMB 150-S üzerine monteli 2,5 m su tankýna sahiptir. Su tanký
içinde bulunan sensörleri sayesinde su seviyesi azaldýðýnda
giriþ pnömatik vanasýný açar ve otomatik su dolumu saðlanýr.
Elektronik Tartı Sistemi
Mikserin ayaklarýna 120° açý ile yerleþtirilmiþ load-cell'ler
vasýtasýyla mikser içindeki aðýrlýk ekrandan okunabilir.
Diğer Avantajları
ZMB 150-S tam otomatik kumandalý olmasýndan dolayý
sadece bir kiþi kullanarak çok hýzlý bir þekilde bentonit hazýrlanýr. Zamandan ve insan gücünden tasarruf saðlanýr. Üzerine
monte edilebilen 25 ton kapasiteli ZSB 20 ile ayrý bir siloya ve
konveyöre gerek duymaz.
ZMB 150-S Operator Cabin
ZMB 150-S has an operator cabin which allows wide and
comfortable working conditions. The working efficiency under
hot conditions is increased by 10.000 BTU air conditioner
mounted in cabin and by the isolation material on walls.
Remote Control Panel
Operator can control all the functions of ZMB 150-S by the
panel board, can read the capacity of mixer from the indicator
and can see the possible faults again by the warning lights on
the panel. All valves on ZMB 150-S are pneumatic and can be
controlled by the remote control panel.
Water Tank
ZMB 150-S has a water tank of 2,5 m mounted on it. By the
sensors in the water tank, it opens entrance pneumatic valve
when the water level decreases and automatic water filling is
ensured.
Electronic Weigher System
The weight in mixer can be read from display by the load-cells
placed on the jambs of mixer by 120° angle.
Other Advantages
Because ZMB 150-S is full automatic controlled, it can prepare
bentonite very fast by just only one person. Saving from time
and manpower is ensured. It does not need another silo or
conveyor by ZSB 20 with 25 tons capacity which can be mounted on it.
Bentonit Santrali/Betonite Plant
ZSB 20
ZMB 150-S üzerine monte edilebilir.
25 tonluk yüksek kapasitesi ile uzun süre bentonit takviyesi yapmaya gerek duymaz.
Ýki adet vibro motor ve iki adet hava giriþi ile silo içinde
oluþabilecek bentonit sýkýþmasýný önler.
Tabanda bulunan helezon konveyörü sayesinde silo
içinde bulunan bentonitin miksere aktarýmý ayrý bir
konveyöre ihtiyaç duymadan yapýlýr.
ZSB 20
Can be mounted over ZMB 150-S.
It does not require bentonite reinforcement for a long
period by its high capacity of 25 tons.
Prevents bentonite compression possible to occur
inside silo by two vibro engines and by two air inlets.
By the screw conveyor at base, the transfer of bentonite
inside silo to the mixer is performed without the requirement of another conveyor.
MODEL
Mikser Kapasitesi
Karıştırma Süresi
Pompa Kapasitesi
Güç
Su Tankı Kapasitesi
Komprasör
Komprasör Tank Kapasitesi
Hidrofor
Ağırlık
Ölçüler
Silo
Depolama Kapasitesi
Aktarma Kapasitesi
Konveyör Motoru
Vibrasyon Motorları
Ağırlık
Ölçüler
TYPE
Mixer Capacity
Mixing Time
Pump Capacity
Power
Water Tank Capacity
Compressor
Compressor Tank Capacity
Water Pump
Weight
Dimension
Silo
Storage Capacity
Transfer Capacity
Conveyor Engine
Vibro Motors
Weight
Dimension
ZMB 150S
It
min
m3/h
KW
It
bar
It
lt/min
kg
mm
m3
It/dk
KW
KW
kg
mm
700
4
150
15
2500
8
100
90
4900
6000x2400x2600
ZSB20
25
400
7.5
2x1,5
2900
6000x2400x2600
Jet Grout Santrali/Jet Grout Plant
AVANTAJLARI
Jet Grout Santralîleri 30 m3/h'e kadar üretim kapasitesi ile
farklý boyutlarda ekipmanlar içerir.
Sürekli madde deðiþ tokuþu sayesinde iki alanda da
karýþtýrýlan en yüksek homojenliðe ulaþýr.
Tortulaþmayý en düþük seviye ye getirir
Kýsa sürede yüksek karýþtýrma performansý
Hammade kullanýmýný en aza indirgeme
Tam otomatik kumandalý operatör kabini
ADVANTAGES
Jet grout plants range includes different sizes equipment with
production capability up to 30 m3/hour.
The continuous mass transfer between the two zones ensures
maximum possible homogeneity of the mixture.
Absolutely minimal sedimentation of the mixture.
High mixing capacity due to short mixing time.
Lowest possible use of raw materials
Operator cabin with full automatic control panel board.
UYGULAMA ALANLARI
Ankraj enjeksiyonu
Jet Grout
Delgi Uygulaman
Betonlama
Dip enjeksiyon
Tünel uygulamalarý
Baraj uygulamalarý
APPLICATIONS
Anchor injection
Jet grouting
Drilling
Concreting
Cavity filling
Bottom injection Tunnel applications
Dam applications
Jet Grout Santrali/Jet Grout Plant
MODEL
TYPE
Karıştırıcı Kapasitesi
Dinlendirici Kapasitesi
Karıştırma Kapasitesi
Mak. Pompa Debisi
Motor
Pompa
Hidrolik Tank
Ölçüler
Ağırlık
Mixer Capacity
Agitator Capacity
Water Tank Capacity
Vertical Screen
Max. Pump Flow Rate
Electric Motor
Pump
Hydraulic Tank
Dimensions
Weight
It
It
It
m/h
It/min
kw
cc
It
mm
It/min
ZM20
ZM 25
ZM30
1400
2750
3000
20
400
22/11
45
200
6000x2400x2600
6000
1750
3000
3000
25
560
22/11
45
200
6000x2400x2600
6400
2000
3400
3000
30
700
22/11
45
200
6000x2400x2600
6800
Enjeksiyon Santrali/Deep Soil Mix (DSM) Grout Plant and Pump Unit
AVANTAJLARI
Enjeksiyon santralleri 30 m3/h'e kadar üretim kapasitesinin
yanýnda tek pistonlu olan enjeksiyon pompasý 150 m3 kadar
basma kapasitesine sahiptir.
Sürekli madde deðiþ tokuþu sayesinde iki alanda da
karýþtýrýlan en yüksek homojenliðe ulaþýr.
Tortulaþmayý en düþük seviye ye getirir
Kýsa sürede yüksek karýþtýrma performansý
Hammade kullanýmýný en aza indirgeme
Tam otomatik kumandalý operatör kabini
ADVANTAGES
Injection plants 30 m3/hour production capacity, and
single-piston injection pump which is capable of injection to
150m3.
The continuous mass transfer between the two zones ensures
maximum possible homogeneity of the mixture.
Absolutely minimal sedimentation of the mixture.
High mixing capacity due to short mixing time.
Lowest possible use of raw materials
Operator cabin with full automatic control panel board.
UYGULAMA ALANLARI
Ankraj enjeksiyonu
Jet Grout
Delgi uygulamalarý
Betonlama
Dip enjeksiyon
Tünel uygulamalarý
Baraj Uygulamalarý
APPLICATIONS
Anchor injection
Jet grouting
Drilling
Concreting
Cavity filling
Bottom injection Tunnel applicatiopns
Dam applications
Enjeksiyon Santrali/Deep Soil Mix (DSM) Grout Plant and Pump Unit
MODEL
TYPE
MİKSER
Mak. Pompa Debisi
ENJEKSİYON POMPASI
INJECTION PUMP
Pompa Sayısı
Piston Çapı
Piston Stroku
Emme Çapı
Basma Çapı
Dakikadaki Strok Sayısı
Mak. Debi
Mak. Basınç
HİDROLİK SİSTEM
HYDRAULIC SYSTEM
Motor
Pompa
Hidrolik Tank
Ölçüler
Ağırlık
MIXER
Mixer Capacity
Agitator Capacity
Water Tank Capacity
Mixing Capacity
Max. Pump Flow Rate
MODEL
TYPE
Silo Kapasitesi
Ölçüler
Silo Capacity
Dimensions
Pump Nos
Piston Diameter
Piston Stroke
Suction Diameter
Delivery Diameter
Stroke Per Minute
Max. Flow Rate
Max. Pressure
Electric Motor
Pump
Hydraulic Tank
Dimensions
Weight
ZM20/ZP150
It
It
It
m3/h
It/min
1400
2750
3000
20
400
It/min
bar
1
127
305
76,2
30
40
150
140
kw
cc
It
mm
kg
22/11
45
200
6000x2400x2600
7500
mm
mm
mm
mm
ZSB20
It
mm
25000
6000x2400x2600
Mini Grout Mixing and Pump Unit
Yarým otomatik kumanda paneli.
Hýzlý karýþtýrma kapasitesinin yanýnda kýsa sürede karýþtýrýcý
dolumu.
Boyutunun küçük olmasý inþaat alanlarýnda kolaylýk saðlar.
ZM5 ve ZM10 olmak üzere iki farklý tipte sunulmuþtur.
Ankraj enjeksiyonu, Jet grout, betonlama, delgi uygulamalarýnda kullanýlmaktadýr.
Tartý sistemi mevcuttur.
Semi-automatic control panel
In addition to the mixing capacity is also the rapid mixer filling.
Because of its small format size, it is very useful at construction areas.
Presented as two different types as being ZM5 and ZM10 .
It is used drilling applications as such Anchor injection, jet
grouting, concreting.
We have weight system
Mini Grout Mixing and Pump Unit
MODEL
TYPE
MİKSER
ENJEKSİYON POMPASI
INJECTION PUMP
Pompa Sayısı
Piston Çapı
Piston Stroku
Emme Çapı
Basma Çapı
Mak. Debi
Mak. Basınç
HİDROLİK SİSTEM
HYDRAULIC SYSTEM
Motor
Pompa
Hidrolik Tank
Ölçüler
Ağırlık
MIXER
Mixer Capacity
Agitator Capacity
Mixing Capacity
Pump Nos
Piston Diameter
Piston stroke
Suction Diameter
Delivery Diameter
Stroke Per Minute
Max. Flow Rate
Max. Pressure
Electric Motor
Pump
Hydraulic Tank
Dimensions
Weight
ZM5/ZP90
ZM10/ZP150
350
550
5
500
700
10
It/min
bar
1
100
350
60
42
40
90
100
1
127
305
76.2
42
40
150
100
kw
cc
It
mm
kg
7,5/15
28
180
2200x1800x2000
2250
11/22
28
200
2500x1800x2000
2500
It
It
m3/h
mm
mm
mm
mm
Enjeksiyon Pompası/Grout Pump
Yarým otomatik kumanda ve kablolu uzaktan kumanda
imkaný.
Kesintisiz çalýþma süresi.
ZP90 ve ZP150 olmak üzere iki farklý tipte sunulmuþtur.
Semi-automatic control and wired remote control options.
Continuous working time.
ZP150 ZP90 and presented two different types.
There are two different types as ZP 150 and ZP 90
Enjeksiyon Pompası/Grout Pump
MODEL
TYPE
Pompa Sayısı
Piston Çapı
Piston Stroku
Emme Çapı
Basma Çapı
Mak. Debi
Mak. Basınç
Motor
Ölçüler
Pump Nos
Piston Diameter
Piston Stroke
Suction Diameter
Delivery Diameter
Stroke Per Minute
Max. Flow Rate
Max. Pressure
Electric Motor
Dimensions
mm
mm
mm
mm
It/min
bar
kw
mm
ZP 90
ZP 150
1
100
305
60
30
40
90
100
75/15
500x750x1200
1
127
305
76,2
42
40
150
100
11/12
600x850x1600
Ekstraktör/Extractor
MODEL
TYPE
Ekstraktör Genişliği (W)
Ekstraktör Yüksekliği (H)
Çekme Kapasitesi
Width of Extractor
Height of Extractor
Pulling Capacity
mm
mm
kN
ZE 100
ZE 150
500-1000
2350
2000
1000/1800
2350
2000
Tırpan/Chiesl (Hammer)
Ýstenilen ölçü ve aðýrlýkta imal edilmektedir.
Aþýnmaya maruz yüzeyler Hardox 500 malzemeden imal
edilmektedir.
Ana gövde S 355 malzemeden üretilmektedir.
Manufactured by required sizes and weights.
Surfaces exposed to abrasion are being manufactured by
Hardox 500 material.
Main body is manufactured by S 355 material.
İhtiyaca göre ölçülendirilir. As per your requirements
Manuel Mikser/Manuel Mixer
Manuel mikser yardýmýyla insan gücü azaltýlarak
kýsa zamanda homojen bir karýþým elde edilebilmektedir.
ZM100 ve ZM150 olmak üzere iki farklý tipte
sunulmuþtur.
Boyutlarýnýn küçük olmasý inþaat alanlarýnda
kolaylýk saðlar.
By means of manual mixer, homogen mixing
can be obtained in short time interval by reducing the manpower.
Presented as two different types as being ZM100
and ZM150.
It is very useful in construction areas due to its
small dimensions.
MODEL
TYPE
Güç
Mikser Kapasitesi
Üretim Kapasitesi
Karıştırma Süresi
Pompa Kapasitesi
Ölçüler
Ağırlık
Power
Mixer Capacity
Mixing Capacity
Production Capacity
Mixing Time
Pump Capacity
Sand Content (After Treatment)
Weight
KW
It
It
m3/h
min
m3/h
mm
kg
ZM100
ZM150
7,5
1100
1000
20
2
100
2350x1900x1440
1100
15
1700
1500
25
2
150
2900x2150x1540
2000
Tremi Boruları/Tremie Pipes
Tremiler, betonu besleme hunisinden fore kazýðýn en altýna
kadar doldurmak için kullanýlan birleþebilen borulardýr.
Tremileri birbirine ekleme ve birbirinden ayýrma iþlemi
oldukça kolaydýr.
Müþterilerin isteðine göre çeþitli boy ve çaplarda üretim
yapýlabilmektedir.
Üretimini yaptýðýmýz tremi ekipmanlarý aþaðýdaki gibidir:
• Tremi Borusu
• Tremi Platformu
• Kravat
• Tremi Hunisi
• Tremi Kaldýrma Baþlýðý
• Tremi Yýkama Baþlýðý vs.
TREMI BORULAR
TREMIE PIPES
Boru Çapı
Boru Et Kalınlığı
Soket Çapı
Tremi Boyu
Tremi Ağırlığı (1 m)
Huni Ağırlığı
Pipe Diameter
Wall Thickness
Socket Diameter
Length of Tremie
Weight of Tremie (1 m)
Weight of Hopper
They are connectable pipes used to transfer concrete from the
buckets and hopper to the bottom of the pile.
They are easy to connect and disconnect.
Products in various lengths and diameters can be provided as
customer requirements.
The equipments of tremie set which we can manufacture are
as follows:
• Tremie Pipe
• Tremie Platforms
• Suspension Jig
• Hopper
• Holder
• Pipe Cleaner and so on.
mm
mm
mm
mm
kg
kg
kg
kg
kg
195
8
225
1000-6000
40
46
52
58
245
219
8
255
1000-6000
80
92
104
116
250
245
8
272
1000-6000
120
138
156
174
255
275
8
310
1000-6000
240
276
312
348
260
Çift Cidarlı Muhafaza Boruları/Double Wall Casings
ÇİFT CİDARLI MUHAFAZA BORULARI - DOUBLE WALL CASINGS
Ağırlık/Weight (kg)
D1/D2 (mm)
620/540
750/670
800/720
880/800
1000/920
1080/1000
1200/1120
1280/1200
1300/1220
1500/1400
1600/1500
1800/1700
2000/1880
2120/2000
2200/2080
2500/2380
3000/2880
S1 (mm)
12
12
12
12
12
12
16
16
16
20
20
20
20
20
20
20
20
S2 (mm)
8
8
8
8
8
8
8
8
8
10
10
10
15
15
15
15
20
T (mm)
40,00
40,00
40,00
40,00
40,00
40,00
40,00
40,00
40,00
50,00
50,00
50,00
60,00
60,00
60,00
60,00
60,00
Bağlantı/Bolts
8
10
10
10
10
10
12
12
12
12
12
16
12
12
12
16
16
1m
420
490
550
600
680
780
850
900
950
1,450
1,600
1,750
2,500
2,600
2,750
3,500
5,000
2m
756
882
990
1,080
1,224
1,404
1,530
1,620
1,710
2,610
2,880
3,150
4,500
4,680
4,950
6,300
9,000
3m
1,096
1,279
1,436
1,566
1,775
2,036
2,219
2,349
2,480
3,785
4,176
4,568
6,525
6,786
7,178
9,135
13,050
4m
1,535
1,790
2,010
2,192
2,485
2,850
3,106
3,289
3,471
5,298
5,846
6,395
9,135
9,500
10,049
12,789
18,270
5m
1,918
2,238
2,512
2,741
3,106
3,563
3,882
4,111
4,339
6,623
7,308
7,993
11,419
11,876
12,561
15,986
22,838
6m
2,302
2,686
3,015
3,289
3,727
4,275
4,659
4,933
5,207
7,947
8,770
9,592
13,703
14,251
15,073
19,184
27,405
Tek Cidarlı Muhafaza Boruları /Single Wall Casings
TEK CİDARLI MUHAFAZA BORULARI - SINGLE WALL CASINGS
Ağırlık/Weight (kg)
D1/D2 (mm)
620/540
750/670
800/720
880/800
1000/920
1080/1000
1200/1120
1280/1200
1300/1220
1500/1400
1600/1500
1800/1700
2000/1880
2120/2000
2200/2080
2500/2380
3000/2880
S (mm)
15
15
16
16
20
20
20
20
20
25
25
25
30
30
30
30
30
T (mm)
40,00
40,00
40,00
40,00
40,00
40,00
40,00
40,00
40,00
50,00
50,00
50,00
60,00
60,00
60,00
60,00
60,00
Bağlantı/Bolts
8
10
10
10
10
10
12
12
12
12
12
16
12
12
12
16
16
1m
350
408
458
500
567
650
708
750
792
1,208
1,333
1,458
2,083
2,167
2,292
2,917
4,167
2m
630
735
779
850
963
1,105
1,204
1,275
1,346
1,933
2,133
2,333
3,333
3,467
3,667
4,667
6,667
3m
914
1,066
1,130
1,233
1,397
1,602
1,746
1,849
1,951
2,803
3,093
3,383
4,833
5,027
5,317
6,767
9,667
4m
1,279
1,492
1,582
1,726
1,956
2,243
2,444
2,588
2,732
3,925
4,331
4,737
6,767
7,037
7,443
9,473
13,533
5m
1,599
1,865
1,977
2,157
2,444
2,804
3,056
3,235
3,415
4,906
5,413
5,921
8,458
8,797
9,304
11,842
16,917
6m
1,918
2,238
2,373
2,588
2,933
3,365
3,667
3,882
4,098
5,887
6,496
7,105
10,150
10,556
11,165
14,210
20,300
Çarık/Casing Shoe
ÇARIK/CASING SHOES
D1/D2 (mm)
620/540
750/670
800/720
880/800
1000/920
1080/1000
1200/1120
1280/1200
1300/1220
1500/1400
1600/1500
1800/1700
2000/1880
2120/2000
2200/2080
2500/2380
3000/2880
Açıklama/Description
Cassing Shoe/Çarık
Boy/Length
500,00
500,00
500,00
500,00
500,00
500,00
500,00
500,00
500,00
750,00
750,00
750,00
750,00
750,00
750,00
750,00
750,00
Ağırlık/Weight
286
350
375
414
473
513
572
611
621
1,340
1,433
1,618
2,152
2,285
2,374
2,706
3,261
Elmas Adedi/Teeth Qty.
15
19
20
22
25
27
30
32
33
38
41
46
51
54
56
64
77
Sürükleyiciler/Twister
SÜRÜKLEYİCİLER/TWISTER
D1/D2 (mm)
620/540
750/670
800/720
880/800
1000/920
1080/1000
1200/1120
1280/1200
1300/1220
1500/1400
1600/1500
1800/1700
2000/1880
2120/2000
2200/2080
2500/2380
3000/2880
Açıklama/Description
Twister/Sürükleyici
Boy / Length
1.200,00
1.200,00
1.200,00
1.200,00
1.200,00
1.200,00
1.200,00
1.200,00
1.200,00
1.500,00
1.500,00
1.500,00
1.500,00
2.000,00
2.000,00
2.000,00
2.000,00
Ağırlık/Weight
789
902
1,021
1,268
1,320
1,380
1,400
1,520
1,650
2,160
2,250
2,650
3,200
3,240
3,600
4,200
6,500
Bentonit Tankları /Bentonite Tanks
Teleskopik Sistem
Telescobic System
MODEL
TYPE
Genişlik
Yükseklik
Uzunluk
Kapasite
Ağırlık
Widht
Height
Length
Capacity
Weight
mm
mm
mm
m2
kg
ZTS20
ZTS30
ZTS40
ZTL40
ZTL 60
ZTL 80
1720
2000
5220
18
2200
2060
2200
5610
25
3100
2400
2400
6000
35
4000
1920
2300
11220
40
7000
2260
2500
11610
60
7500
2600
2700
12000
80
8170
Delgi Ekipmanları/Drilling Tools
İhtiyaca göre ölçülendirilir. As per your requirements
CFA (Continuous Flight Auger)
Continuous flight auger (CFA), forekazýk yapýmýnda kullanýlan
bir delgi ekipmanýdýr.
CFA vasýtasý ile önce yapýlacak kazýk boyutunda zeminin delinmesi saðlanýr ve sonrasýnda CFA içindeki boþluktan beton
dökme iþlemi gerçekleþtirilir.
Müþterilerimizin istediði çap ve boyutlarda, birçok zemin
þartlarýna uygun CFA üretimimiz mevcuttur.
Continuous flight auger (CFA) is a drilling tool to obtain the pile
by firstly drilling the ground and then injecting concrete from
its hole.
They can be manufactured in required diameters and dimensions for several ground conditions.
Tüm zemin makinalarına ihtiyaç olan ölçüde CFA üretilmektedir. We are produing CFA for all type machines.
DSM (Deep Soil Mixing)
Kelly
Tüm zemin makinalarına ihtiyaç olan ölçüde Kelly üretilmektedir. We are produing Kelly for all type machines.
Hydraulic Waterstopend
Hidrolik Su Tutucu Bantlı (Water Stop-End) Geçirimsizlik Perdesi Uygulaması
Geçirimsizlik perdesi, yüksek yeraltý su seviyesi altýnda inþa edilecek kazý iksa sistemlerinde yeraltý suyu geçirimsizliðini temin
etmek üzere perde duvar dökümü sýrasýnda iki perde duvar arasýna su tutucu bant yerleþtirme iþlemi uygulamasýdýr.
Z Makina Teknolojisi A.Þ. tarafýndan geliþtirilmiþ olan ve patenti alýnmýþ olan hidrolik water stop-end ekipmanlarý ile su tutucu
bant betonlama iþlemi sonucunda duvar arasýnda yerleþtirilerek su geçirimsizliðini saðlamaktadýr.
Uygulama Yöntemi
1. Diyafram Duvar makinasý ile proje kapsamýnda panel açýlýr. Açýlan panelin her iki tarafýna su tutucu bantlý stop-end yerleþtirilir.
Su tutucular hidrolik stop-end üzerine önceden yerleþtirilir.
2. Açýlan panel içerisine demir donatý yerleþtirilir.
3. Demir donatý yerleþtirilen panelin içersine beton dökülür.
4. Beton dökülmüþ hidrolik stop-end'in her iki yanýndan panel duvarýn devamý kazýlýr.
5. Her iki tarafa da panel açýldýktan sonra hidrolik pistonlar devreye girerek stopend kendisini betonlanmýþ duvardan ayýrýr ve su
tutucu bant duvarda býrakýlýr.
6. Hidrolik water stop-end kuyudan kolayca çýkartýlýr.
7. Kuyudan çýkartýlan Water stop-end'ler su tutucu bant yerleþtirilerek ayný kuyunun kazý yapýlmamýþ duvarýna yaslayarak aþaðý
indirilir.
8. Açýlan her iki panele demir donatý yerleþtirilir.
9. Demir donatý yerleþtirilen panellere beton dökülür ve iþlem tekrarlanarak devam eder. Su tutucu bantlar her bir panelin
arasýnda su geçirimsizliðini saðlamaktadýr.
Hydraulic Waterstopend
Cut-off Wall With Water Stop-End Application
Cut-off wall systems are shoring systems applied to ensure the impermeability of the shoring system that will be constructed
under high ground water table. The main function of this shoring system is to prevent ground water intrusion into the excavation,
which can be implemented with diaphragm walls and intersecting bored piles.
The Hydraulic Water Stop-End equipments which were developed and patented by Z Makina Teknolojisi A.S.
provide water-tightness with water-holding band concreting process.
1. The pannel should be opened with the diaphragm wall machine within the project scope. It requires to replace Stop-Ends with
water-holding band to opened pannel. Water-holding parts should be replaced on hydraulic stop-ends initially.
2. The iron equipment should be replaced in the opened pannel.
3. Concrete should be poured in the iron equipment.
4. The pannel wall should be digged from the end of both sides of concrete poured hydraulic stop-end.
5. After opening panels to both sides, stop-end separates itself by hydraulic pistons. The water-holding band should be stayed on
the wall.
6. Hydraulic water stop-end can be easily taken from the well.
7. The water stop-ends that taken from the well, should be bringed down through the same well by leaning against the wall. The
water-holding bands should also be placed.
8. The iron equipment should be placed on both pannels.
9. Concrete should be poured on the pannels which the iron equipment's placed on. It can be repeated in needed quantity.
Water-holding bands provide water-tightness between each pannel.
Marine Works
Z Makina Teknolojisi A.Ş.; makina imalatý konusundaki tecrübesini deniz uygulamalarýna da geçirmiþtir. Tecrübemiz ile modüler
duba imalatýna baþlayarak spesifik iþlerde de kalitemizi ortaya koymuþ bulunmaktayýz. Deniz üzerinde sondaj, foraj, dolgu, kazýk
ve benzeri uygulamalarý yapabilmek adýna geliþtirdiðimiz özel dubalar; bugün, tasarýmlarýmýzla esnek uygulama alanlarý
sayesinde müþterinin her türlü ihtiyacýna cevap verebilmektedir.
Özel dizayný sayesinde su üzerinde kolayca monte edilebilen dubalar oldukça pratik bir uygulama saðlar. Özel kilitleri sayesinde
çok emniyetli ve kolay uygulanýr.
Özel Avantajlarımız;
* Kolay monte edilebilirler.
* Modüler þekilde konteynýr boyutunda olup nakliyesi kolaydýr.
* Büyütülüp küçültülebilir.
* Montaj deniz üzerinde olduðundan çok avantajlýdýr.
* Ayak eklenerek Jack up duba haline getirilebilir.
Jack Up Duba
Modüler dubaya ayak mekanizmasý ve ayaklar ilave edilerek mevcut dubamýz Jack up duba haline gelir.
Avantajları;
* Ýstenilen derinliðe ulaþýlabilecek baðlantýlý ayaklar kullanýlabilir.
* Hidrolik piston hareketi ile ayaklar indirilip kaldýrýlabilir.
* Kilit mekanizmasý otomatik kumandalýdýr.
* Elektrik veya dizel tahrikli hidrolik sistem kullanýlýr.
Marine Works
Z Makina Teknolojisi A.Ş. started to manufacture Spud Barges as used our many yeared experience. These Spud Barges can
use drilling, made-up ground, piling etc. because Spud Barges applications area is too huge and we are providing our clients all
needs with this application.
Spud Barges can setting up on the water (sea or lake etc.) due to its special design and its provide easy application. It has special
locking system in this way our application used easy and more safety.
Special advantages;
* Its montage is too easy.
* Its transportation is easy because manufacture dimensions are same container sizes and you can fit it container easily.
* It can be maximised and minimised.
* You can montage it on the water and its big advantage for this application.
* You can add feet our Spud Barge and so it can be Jack-up Spud Barge.
Jack-up Spud Barges;
Our Jack-up Barges are like Spud Barges and difference is its feets. Its advantages are;
* Can be use connetion feets for go down depth which you want.
* Feets can go down and go up with hydraulic pistons.
* Locking system is working with automatic controller.
* Used electric or diesel excitation hydraulic system.
Eylül,2014 – September,2014
Z MAKİNA TEKNOLOJİSİ A.Ş.
Alemdað Merkez Mah. Resadiye Cad. No:69/G 34794 Çekmeköy-Ýstanbul
Tel: +90-216-430 06 00 • Faks: +90-216-484 41 74
www.zmakina.com.tr • [email protected]

Z Makina AS

Transkript

Benzer belgeler