Özgeçmiş PDF indir - Mühendislik Mimarlık Fakültesi

Transkript

TÜBİTAK
2237 – Proje Eğitimi Etkinliklerini Destekleme Programı
ÖZGEÇMİŞ
1. Genel
Düzenleme Tarihi:
20/10/2013
Unvanı Adı Soyadı :
Prof. Dr. Erdal ÇELİK
Yazışma Adresi:
Dokuz Eylül Üniversitesi, Mühendislik Fakültesi, Metalurji ve Malzeme
Mühendisliği Bölümü, Üretim Metalurjisi Anabilim Dalı, 35160, Buca, İzmir
Doğum Tarihi ve Yeri:
23/11/1967
Tel:
0.232.301 7459/0.232.301 7445
GSM:
0535.8614273
E-Posta:
[email protected]
Faks:
0.232.301 7452
2. Eğitim: (Son aldığınız dereceden / diplomadan başlayarak yazınız)
Öğrenim Dönemi
Üniversite
Derece (*)
Öğrenim Alanı
Haziran 2000
Doktora
Florida State University (ABD)
ve
Sakarya
Üniversitesi
(Turkiye)
Metalurji Mühendisliği
Eylül 1995
Y. Lisans
Sakarya Üniversitesi (SAU)
Haziran 1993
Lisans
İstanbul
(İTÜ)
Teknik
Üniversitesi
(*) Diploma Türü (Lisans, Y.Lisans, Doktora)
3. Akademik ve Mesleki Deneyim:
Görev Dönemi
Unvan
Üniversite
Bölüm
2010-
Prof. Dr.
Dokuz Eylül Üniversitesi
Metalurji ve Malzeme Mühendisliği
2005-2010
Doç. Dr.
2002-2005
Yrd. Doç. Dr.
2001-2002
Öğretim Görevlisi
1997-2000
Araştırma
Görevliliği
Florida State University (USA)
Magnet Bilimi ve Teknolojisi
1994-2001
Araştırma
Görevliliği
Sakarya Üniversitesi
4. TÜBİTAK İle Olan İlişki:
Yürürlükte olan 1001 proje sayısı
Reddedilmiş olan 1001 başvuru sayısı
Başarı ile tamamlanmış olan 1001 proje sayısı
1001 programı dışındaki TÜBİTAK programlarına ilişkin, yürürlükte olan proje
sayısı, reddedilen proje sayısı ve başarı ile tamamlanmış proje sayısı
TÜBİTAK programları kapsamında yapmış olduğunuz panelist/hakem görev
43
sayısı
Daha önce 2237 programı kapsamında kaç eğitim etkinliğinde yer aldınız?
5. Proje Eğitimi Konusundaki Bilgiler:
Proje Eğitimi konusunda akademik ders vermekte misiniz?/verdiniz mi?
Proje Eğitimi ile ilgili seminer/eğitim aldıysanız, eğitime ilişkin bilgiler
Herhangi bir proje eğitiminde eğitmen/danışman olarak yer aldıysanız,
eğitime ilişkin bilgiler
Daha önce 2237 programı kapsamında kaç eğitim etkinliğinde yer aldınız?
6. Yayın Bilgileri
ISI indeksine kayıtlı dergilerde yayımlanan makale sayısı
171
Diğer indekslere kayıtlı / Hakemli dergilerde yayımlanan makale sayısı
37
İndekslere kayıtlı / Hakemli konferans kitaplarında yayınlanan bildiri sayısı
133
Diğer yayınlar
4
TOPLAM
345
7. Yayınlarınıza aldığınız toplam atıf sayısı (Web of Science‘a göre) :
8. Seçilmiş yayınlarınız: ( Araştırma konusuyla ilgili en önemli 5 yayınınızı referans formatında aşağıya
yazınız)
Yazarlar
Makale Başlığı
Dergi
H. YILMAZ ATAY, L.
ERAL DOGAN and E.
CELIK,
“Investigation of Self-healing Property of Chitosan
Reinforced Epoxy Dye Composite Coatings”
Journal
Materials
of
vol. 213,
pp. 8-15
January
2013.
S.
KAÇMAZ,
K.
ERTEKİN,
M.GÖÇMENTÜRK, A.
SÜSLÜ, Y. ERGUN and
E. ÇELİK
“Selective Sensing of Fe3+ at Pico-molar Level with
Ethyl Cellulose Based Electrospun Nanofibers”
Reactive and
Functional
Polymers
vol.
73,
pp.674-682
March
2013
M. EROL and E. CELIK
“Graphite
Flake-Carbon
Black
Reinforced
Polystyrene Matrix Composite Films Deposited on
Glass Fiber Woven Fabrics as Plane Heaters”
Materiali
in
Tehnologije/M
aterials
and
Technology
vol. 47, pp.
25-28
March
2013
A. PASINLI, O.CULHA,
E. CELIK and M.
TOPARLI
”A Model for the Calculation of Mechanical
Properties of Hydroxyapatite Coatings on Ti6Al4V
Substrate Using Finite Element Methods”
Mathematical
and
Comptational
Applications
vol. 16, pp.
136-147
January
2011
E. CELIK
“Ho2O3-ZrO2 Insulation Coatings on AgMg Sheathed
Bi-2212 Superconducting Tapes by Sol-gel
Technique for Magnet Technology”
Journal
of
Sol-gel
Science and
Technology
vol. 53, pp.
561-569
March
2010
Cilt
Sayfa
Sayı
/
/
Tarih
9. Son 5 yılda yapmış olduğunuz yayınların listesi:
YAYINLAR
Uluslararası hakemlİ dergİ/proceeding
1-(*) A. ŞAKAR-DELIORMANLI, E. CELIK and M. POLAT, “Preparation of Pb(Mg1/3Nb2/3)O3 Films by Aqueous Tape
Casting”, Journal of the European Ceramic Society, vol. 29, pp. 115-123, January 2009.
2-(*) A. ŞAKAR-DELIORMANLI, M. POLAT and E. CELIK, “Influencing of Dispersing Agents on the Solubility of
Perovskite in Water”, Journal of Dispersion Science and Technology, vol. 30, pp. 4-10, January 2009.
3-(*) E. CELIK, I. BIRLIK and Y. KARAKAS, “Synthesis of NiCrAl/MgO-ZrO2 Cermet Powders by Chemical Method for
Functionally Gradient Materials”, Journal of Materials Processing Technology, vol. 209, pp. 695-699, January 2009.
4-(*) O. SAYMAN, F. SEN, E. CELIK and Y. ARMAN, “Thermal stress analysis of WC-Co/Cr-Ni multilayer coatings on
316L steel substrate during cooling process”, Materials and Design, vol. 30, pp. 770-774, January 2009.
5-(*) M. TOPARLI, E. CELIK, I. KAYATEKIN, E. DOKUMACI, M. I. MUGLALI and N. F. AK AZEM, “Tribological
Properties of Electric Arc Sprayed CuSn Coating for Bearing Elements”, Tribology Transaction, vol.52, pp.389-394, March
2009.
6-(*) O.CULHA, D.YILMAZ, M.TOPARLI, H.S. SOYKAN, E.CELIK and T.AKSOY, “Indentation Size Effect on Mechanical
Properties of HVOF Sprayed WC Based Cermet Coatings for a Roller Cylinder”, Surface Coatings and Technology, vol. 2003,
pp.2052-2057, March 2009.
7-(*) M. EROL, Y. OZTURK, I. AVGIN and E. CELIK, “Production, Characterization and Magnetic Properties of BismuthSubstituted Yttrium Iron Garnet Layers Prepared by Sol–Gel Process”, Applied Physics:Conference Series, vol. 153, pp.012049,
April 2009.
8-(*) E. CELIK, U. AYBARC, M.F. EBEOGLUGIL, I. BIRLIK and O. CULHA, “ITO Films on Glass Substrate by Sol-gel
Technique: Synthesis, Characterization and Optical Properties”, Journal of Sol-gel Science and Technology, vol. 50, pp. 337347, May 2009.
104-(*) O. CULHA, M.F. EBEOGLUGIL, I. BIRLIK, E. CELIK and M. TOPARLI, “Synthesis, Characterization and Optical
Properties of Tin Oxide Thin Films on Glass Substrate by Sol-Gel Technique for Gas Sensors”, Journal of Materials Processing
Technology, vol. 51, pp. 32-51, May 2009.
9-(*) A. CIRELI AKSIT, N. ONAR, M.F. EBEOGLUGIL, I. BIRLIK, E. CELIK and I. OZDEMIR, "Electromagnetic and
Electrical Properties of Coated Cotton Fabric with Barium Ferrite Doped Polyaniline Film", The Journal of Applied Polymer
Science, vol. 113, pp. 358-366, June 2009.
10-(*) N. ONAR, A. CIRELI AKSIT, M.F. EBEOGLUGIL, I. BIRLIK, E. CELIK and I. OZDEMIR, "Structural, Electrical and
Electromagnetic Properties of Cotton Fabrics Coated with Polyaniline and Polypyrrole”, The Journal of Applied Polymer
Science, vol. 114, pp. 2003-2010, August 2009.
11-(*) A. ŞAKAR-DELIORMANLI, E. CELIK and M. POLAT, “Solubility and Aging of Lead Magnesium Niobate in Water”,
Ceramic International, vol. 35, pp. 503-508, September 2009.
12-(*) E. CELIK, “Ho2O3-ZrO2 Insulation Coatings on AgMg Sheathed Bi-2212 Superconducting Tapes by Sol-gel Technique
for Magnet Technology”, Journal of Sol-gel Science and Technology, vol. 53, pp. 561-569, March 2010.
13-(*) I. BIRLIK and E. CELIK, “Characterization of Buffer Layers on Ni Substrates for YBCO Coated Conductors”, Canadian
Metallurgical Quarterly, vol. 49, pp. 81-89, January 2010.
14-(*) A. PASINLI, M. YÜKSEL, E. CELIK. S. SENER, and A.C.TAS, “A New Approach in Biomimetic Synthesis of Calcium
phosphate Coatings using Lactic acid-Na Lactate Buffered Body Fluid Solution”, Acta Biomaterialia, vol. 6, pp. 2282-2288,
May 2010.
15-(*) I. BIRLIK, M ERBE, T. FREUDENBERG, E. CELIK, L. SCHULTZ and B. HOLZAPFEL, “Flux Pinning Improvement
of YBCO Superconducting Films with BaZrO3 Nanoparticles Prepared by Chemical Solution Deposition Method”, Journal of
Physics: Conference Series, vol. 234, pp. 012004, August 2010.
16-(*) H. YILMAZ ATAY and E. CELIK, “Use of Turkish Hydromagnesite & Huntite Minerals in Plastic Materials as a Flame
Retardant”, Polymer Composite, Vol. 31, pp. 1692-1700, June 2010.
17-(*) M. TOPARLI, O. SAYMAN and E. CELIK, “Numerical Investigation of Residual Stresses in YBCO/CeO2/YSZ/CeO2/Ni
Architextured Materials for Coated Conductors”, Mathematical and Comptational Applications, vol. 16, pp. 125-135, January
2011.
18-(*) A. PASINLI, O.CULHA, E. CELIK and M. TOPARLI, ”A Model for the Calculation of Mechanical Properties of
Hydroxyapatite Coatings on Ti6Al4V Substrate Using Finite Element Methods”, Mathematical and Comptational Applications,
vol. 16, pp. 136-147, January 2011.
19-(*) A. OKUR, R. YİĞİT, E. CELIK, and O. SAYMAN, “Thermal Stress Analysis in ZrO2 Insulation Coatings on Cr-Ni
Substrates During Cooling Process”, Mathematical and Comptational Applications, vol. 16, pp. 598 - 604, January 2011.
20-(*) N. LKHAGVAJAV, I.YASA, E. CELIK, M. KOIZHAIGANOVA and O. SARI, ”Antimicrobial Activity of Colloidal
Silver Nanoparticles Prepared by Sol-gel Method”, Digest Journal of Nanomaterials and Biostructures, vol. 6, pp. 149-154,
February 2011.
21-(*) S. KAÇMAZ, K. ERTEKİN, A. SÜSLÜ, M. ÖZDEMİR, Y. ERGUN, E. CELIK and U. CÖCEN, “Emission Based Subnanomolar Silver Sensing with Electrospun Nanofibers”, Sensor and Actuators B: Chemical, vol. 153, pp.205-213, March 2011.
22-(*) O. SANCAKOGLU, O.CULHA, B. AGADAY, M. TOPRARLI and E. CELİK, “Co-deposited Zn-Submicron Sized
Al2O3 Composite Coatings: Production, Characterization and Micromechanical Properties”, Materials and Design, vol. 32, pp.
4054-4061, April 2011.
23-(*) S. AYDOĞDU, K. ERTEKİN, A. SÜSLÜ, M. ÖZDEMİR, E. ÇELİK and U. CÖCEN, “Optical CO2 Sensing with Ionic
Liquid Doped Electrospun Nanofibers”, Journal of Fluorescence, vol. 21, pp. 607-613, December 2011.
24-(*) Y. ÖZTURK, M. EROL, E. ÇİNKILIÇ, E. ÇELİK and I. AVGIN, “Production of Cerium and Bismuth Doped Yttrium
Iron Garnet Thin Films with Unusual Magnetic Properties Using Sol-gel Method”, International Journal of Material Science and
Electronic Research, Vol. 2, pp. 25-31, December 2011.
25-(*) M.KOIZHAIGANOVA, N.LKHAGVAJAV, I.YAŞA and E.CELIK, “New Gelatin-Hydroxyapatite Nanocomposite
Films Containing Nano Silver: Synthesis, and, Mechanical and Antimicrobial Properties”, Journal of Bionanoscience, 2011
(published).
26-(*) S. KAÇMAZ, K. ERTEKİN, A. SÜSLÜ, Y. ERGUN, E. ÇELİK and U. CÖCEN, “Sub-nanomolar Sensing of Ionic
Mercury with Polymeric Electrospun Nanofibers”, Materials Chemistry and Physics, vol. 133, pp. 457-552, February 2012.
27-(*) A. GURBUZ, N. ONAR, İ. OZDEMİR, A.C. KARAOGLANLI and E. CELİK, “Structural, Thermal and Magnetic
Properties of Barium-Ferrite Powders Substituted with Mn, Cu or Co and X (X=Sr and Ni) Prepared by the Sol-Gel Method”,
Materiali in Tehnologije/Materials and Technology, vol. 46(3), pp.305-310, June 2012.
28-(*) I.YAŞA, N.LKHAGVAJAV, M.KOIZHAIGANOVA, E.CELIK and O. SARI, “Assessment of Antimicrobial Activity of
Nanosized Ag-TiO2 Colloids”, World Journal of Microbiology and Biotechnology, 2012 (published).
29- E. CELIK, F. OZTOPRAK, M.F. EBEOGLUGIL, I. BIRLIK, R. YIGIT, M. TANOGLU and M.H. ASLAN, “Synthesis,
Characterization and Optical Properties of ZnO-CuO-Al2O3 Semiconducting Films on Glass Substrates by Sol-Gel Technique”,
Journal of Material Sciences, vol. 2, pp. 9-36, December 2012.
30- (*) H. YILMAZ ATAY and E. CELIK, “Electrical Behaviours of Flame Retardant Huntite and Hydromagnesite Reinforced
Polymer Composites”, ISRN Polymer Science, pp. 1-9, December 2012.
31-(*) A. GOKTAS, I.H. MUTLU, Y. YAMADA and E. CELIK, “Influence of pH on the Structural, Optical and Magnetic
Properties of Zn1-xMnxO4 Thin Films Grown by Sol-gel Method”, J. Alloys and Compounds, vol. 553, pp.259-266, January
2013.
32- (*) H. YILMAZ ATAY, L. ERAL DOGAN and E. CELIK, “Investigation of Self-healing Property of Chitosan Reinforced
Epoxy Dye Composite Coatings”, Journal of Materials, vol. 213, pp. 8-15, January 2013.
33-(*) S. KAÇMAZ, K. ERTEKİN, M.GÖÇMENTÜRK, A. SÜSLÜ, Y. ERGUN and E. ÇELİK, “Selective Sensing of Fe3+ at
Pico-molar Level with Ethyl Cellulose Based Electrospun Nanofibers”, Reactive and Functional Polymers, vol. 73, pp.674-682,
March 2013.
34- (*) M. EROL and E. CELIK, “Graphite Flake-Carbon Black Reinforced Polystyrene Matrix Composite Films Deposited on
Glass Fiber Woven Fabrics as Plane Heaters”, Materiali in Tehnologije/Materials and Technology, vol. 47, pp. 25-28, March
2013.
35-(*) Y. ÖZTURK, M. EROL, E. ÇELİK, Ö. MERMER, G. KAHRAMAN and I. AVGIN, "Structural and Magnetic Properties
of Cerium-doped Yttrium Iron Garnet Thin Films Prepared on Different Substrates Using Sol-gel Process", Materiali in
Tehnologije/Materials and Technology, vol. 47, pp. 59-63, March 2013.
36-(*) M. EROL, O. SANCAKOGLU, M. YURDDAŞKAL, S. YILDIRIM and E. CELIK, “A Comparison on Physical,
Structural and Photocatalytical Properties of TiO2 Nanopowders Produced Using Sol-gel and Flame Spray Pyrolysis”,
International Journal of Applied Ceramic Technology, pp. 1-8, April 2013.
37-(*) O.CULHA, I. BIRLIK, M.TOPARLI, E. CELIK, S.ENGEL and B. HOLZAPFEL, “Characterization and Determination
of Mechanical Properties YBCO Superconducting Thin Films with Manganese Using the TFA-MOD Method”, Materiali in
Tehnologije/Materials and Technology, vol. 47, pp.153-160, April 2013.
38-(*) M.Z. ONGUN, K. ERTEKİN, C.G. HIZLIATES, O. OTER, Y. ERGUN and E. ÇELİK, “Determination of Hg (II) Subnanonolar Levels: A Comparative Study with Nanofibrous Materials and Continuous Thin Films”, Sensor & Actuators: B,
Chemical, 2013 (in press).
39-(*) O. SANCAKOGLU, M.EROL, B. AGADAY and E. ÇELİK, “Electro-codeposited Cr-SiC Composite Coatings: Effect of
Pulse Current Frequency on Morphology and Hardness”, Materiali in Tehnologije/Materials and Technology 2012 (in press).
40-(*) M.Z. ONGUN, O. OTER, G. SABANCI, K. ERTEKİN and E. ÇELİK, “Enhanced Stability of Ruthenium Complex in
Ionic Luqid Doped Electrospun Fibers”, Sensor & Actuators: B, Chemical, 2013 (in press).
41- (*) M. ÖZDEMIR, A. SUSLU, Ü. COCEN, E. ÇELIK, “Effect of Viscosity on Production of Alumina Borate Nanofibers via
Electrospinning Technique”, Materiali in Tehnologije/Materials and Technology 2012 (in press).
42-(*) A. ŞAKAR-DELIORMANLI, J.A. LEWIS, M. POLAT and E. CELIK, “Colloidal PMN Inks for Directed Assembly of 2D Arrays and 3-D Periodic Structures”, Journal of the European Ceramic Society, 2012 (in review).
43-(*) A. ŞAKAR-DELIORMANLI, E. CELIK and M. POLAT, “Pb(Mg1/3Nb2/3)O3 Inks for Direct Write Assembly of 3D
Periodic Structures”, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2012 (in review).
44-(*) R. YIGIT, E. CELIK, S. KOKSAL and F. FINDIK, “Performance of Multilayer Coated- and Uncoated- Carbide Tools
When Turning Ductile Cast Iron”, International Tribology, 2012 (in review).
45-(*) A. ŞAKAR-DELIORMANLI, M. POLAT, E. CELIK and W. SIGMUND, “Pb(Mg1/3Nb2/3)O3 Inks for Direct Write
Assembly of 3D Periodic Structures”, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2012 (in review).
46-(*) H. HAVITCIOGLU, B. CECEN, I. INCI, A. PASINLI, M. YÜKSEL and E. CELIK, “Development of Hydroxyapatite
Coated Materials and the Biomechanics Effects”, Journal of Orthopaedic Research, 2012 (in review).
47-(*) O. SANCAKOGLU, B. AGADAY and E. ÇELİK, “Fabrication of Sub-micron Al2O3 Ceramic Reinforced Zn Metal
Matrix Composite Coatings by Electrodeposition Technique”, Canadian Metallurgical Quarterly, 2012 (in review).
48-(*) N.LKHAGVAJAV, M.KOIZHAIGANOVA, I.YAŞA, E.CELIK and O. SARI, “Characterization and Antimicrobial
Performance of Nano Silver Coating on Leather Materials”, Digest Journal of Nanomaterials and Biostructures, 2012 (in
review).
49-(*) H. HAVITCIOGLU, B. CECEN, A. PASINLI, M. YUKSEL, E. ÇELIK, H. YILDIZ, S. AKSOY and I. INCI,
“Biomechanical and Histological Behavior of Ti6Al4V Alloy Substrates Coated with Calcium Phosphate using Lactic Acid-Na
Lactate Buffered Body Fluid”, Journal of Biomedical Science, 2012 (in review).
50-(*) M. OZDEMIR, A. SUSLU, C. TEKMEN, E. CELIK and U. COCEN, “Fabrication of TiO2 Nanofibers by
Electrospinning Technique for Photocatalytic Applications”, Canadian Metallurgical Quarterly, 2010 (in review).
51-(*) M.F. EBEOGLUGIL and E. CELIK, “The Processing and Characterization of Pb(Mg 1/3Nb2/3)O3 (PMN) Nano Scale
Powders for Thin Film Capacitor”, Journal of Sol-gel Science and Technology, 2012 (in review).
52-(*) A.C. AKSIT, N. ONAR, E. ÇELİK, Y. ÇAYDAMLI and I. BIRLIK, “Flame Retardancy Properties of Cotton Fabrics
Treated by Sol-Gel Process”, Journal Applied Polymer Science, 2012 (in review).
53-(*) M. EROL, M. BEKTAS, H. SÖZBİLEN, Ö. MERMER and E. CELIK, “Effects of Ru Substitution on the Microstructure
and Optical Properties of Sol Gel Derived SnO2 Thin Films”, Material Characterization, 2012 (in review).
54-(*) H. YILMAZ ATAY and E. CELIK, “Investigation of Size Dependence of Flame Retardant Polymeric Composite
Coatings/Paints Reinforced with Huntite and Hydromagnesite”, Journal of Composites, 2012 (in review).
55-(*) M.F. EBEOGLUGIL, S. DERINKUYU, A.K. HAMAMCI, I. BIRLIK, M. EROL, M. CAKMAKCI, M.N.
DURAKBASA, G. BAS and E. CELIK, “V-TiO2 Films by Sol-gel Technique: Synthesis, Characterization and Photocatalytic
Properties”, Journal of Materials Processing Technology (2nd International Conference on Quality andn Innovation in
Engineering and Management 22-24 November, Cluj-Napoca Romania ), 2012 (in review).
56- (*) M. EROL, M. YURDDASKAL, S. YILDIRIM, Ö. MERMER, M. ÇAKMAKCI, M.N. DURAKBASA, and E. ÇELİK,
Nano Scale TiO2 Powders via Flame Spray Pyrolysis:Synthesis, Properties and Photocatalytical Decomposition of Methylen
Blue”, Journal of Materials Processing Technology (Kore), 2012 (in review).
57-(*) M. KAPLAN, M.F. EBEOGLUGIL, E. CELIK and E. AVCI, “Fabrication of New High Temperature Gd2O3-ZrO2
Insulation Coatings on Ag Tapes by Sol-gel Technique for Magnet Technology”, J. Physics and Chemsitry of Solids, 2012 (in
review).
58-(*) M. EROL, M. YURDDAŞKAL, S. YILDIRIM, O. SANCAKOGLU and E. CELIK, “A Comparison on Some Specific
Properties and Photocatalytic Efficiencies of TiO2 Sub-micron Nanopowders Produced Using Flame Spray Pyrolysis and Sol-gel
Processess”, International Journal of Applied Ceramic Technology, 2012 (submitted).
59-(*) E. CELIK, O. KALYONCUOGLU, M.F. EBEOGLUGIL and H. ASLAN, “ZnO Semiconducting Films on Glass
Substrate by Sol-gel Technique for Gas Sensors”, Journal of Material Sciences, 2012 (submitted).
60-(*) M. KAPLAN, M.F. EBEOGLUGIL, R.YIGIT, E. CELIK and E. AVCI, “High Temperature Tb2O3-ZrO2 Insulation
Coatings on Ag Tapes by Sol-gel Technique for Magnet Technology”, J. Metallic Materials, 2012 (in review).
61-(*) I. BIRLIK, E. CELIK, and B. HOLZAPFEL, “Flux Pinning Improvement of GdBCO Superconducting Thin Films with
BaZrO3 Nanoparticles Prepared by Chemical Solution Deposition Method”, IEEE Transactions on Applied Superconductivity,
2011 (in review).
62-(*) M. KAPLAN, M.F. EBEOGLUGIL, I. BIRLIK, E. CELIK and E. AVCI, “Synthesis and Characterization of Sol–gel
Derived Yb2O3-ZrO2 Insulation Coatings on Ag Tapes for Magnet Technology”, J. Ceramic Processing Research, 2012 (in
review).
63-(*) M.F. EBEOGLUGIL and E. CELIK, “Sm doped Pb(Mg(1+x)/3Nb(2–x)/3)O3 Nano Scale Powders for Thin Film Capacitor
Applications”, Advanced Engineering Materials, 2012 (in review).
64-(*) M.F. EBEOGLUGIL and E. CELIK, “Tb doped Pb(Mg1/3Nb2/3)O3 Nano Scale Powders for Thin Film Capacitor:
Synthesis, Characterization and Application”, Journal of Sol-gel Science and Technology, 2012 (in review).
65-(*) C. GUNDOGDU, O. OTER, G. DEMİRYAS, Y. ERGUN and E. CELIK, “Photocharacterization of Newly Synthesized
Carbozole Bearing Oxozolones and Emission Based Selective Response to Zinc Ions”, Journal of Spectroscopy, 2012 (in
review).
66- (*) H. YILMAZ ATAY and E. CELIK, “Barium Hexaferrite Reinforced Polymeric Composite Coatings for Radar
Absorbing Applications”, International Scholarly Research Network Journal, 2012 (in review).
67- (*) H. YILMAZ ATAY, I. YASA and E. CELIK, “Antibacterial Polymer Composite Coatings with Synthesized Silver
Nanoparticles”, ISRN Polymer Science, 2012 (in review).
68-(*) E. SUBAŞI, M.Z. ONGUN, K. ERTEKİN, O. OTER, M.Y. ERGUN and E. ÇELİK, “Synthesis, Characterization,
Catalytic Applications and Optical Sensing Properties of Palladium Complexes of Tetra Dentate Schiff Bases”,
Inorganica Chimica Acta, 2013 (in review).
69-(*) O. SAYMAN, E. CELIK, Y. ARMAN and T. AKSOY, “Numerical Analysis of Residual Stresses in High Temperature
ZrO2 Coatings on Ag Tape for Magnet Technologies”, Journal of Materials Processing Technology, 2012 (submitted).
70-(*) A. PASINLI, H. YILDIZ, E. CELIK and S. AKSOY, “Mechanical Properties of Ca-P Coatings on Ti6Al4V Implant
Materials by Biomimetic Method”, Tribology International, 2012 (submitted).
10.1.2.Ulusal Araştırma Makaleleri
11- A. SUSLU, M. OZDEMIR, C. TEKMEN, E. CELIK and U. COCEN, “Fabrication and Characterization of Ag doped TiO 2
Nanofibers by Electrospinning Method”, Anadolu University Journal of Science and Technology, vol. 10, pp. 277-284, June
2009.
12- O. SANCAKOGLU, M. EROL and E. CELIK, “The Science of Our Age: Nanotechnology”, Machine Specialization, vol.
68, pp. 35-38, July 2009.
13- R. YİĞİT, F. FINDIK and E. ÇELİK, “Performance of Multilayer Coated Carbide Tools When Turning Cast Iron”, Turkish
Journal of Engineering and Environmental Sciences, vol. 33, pp.147-157, December 2009.
14- A.ŞAKAR-DELİORMANLI, E. ÇELİK and M. POLAT, “Factors Affecting the Drying Behaviour of Ceramic Films”,
Afyon Kocatepe University Journal of Science, 100-105, December 2009.
15- A.ŞAKAR-DELİORMANLI, E. ÇELİK and M. POLAT, “Near Net Shape Fabrication of Ceramic Suspension Droplets”,
Afyon Kocatepe University Journal of Science, 155-160, December 2009.
17- A.ŞAKAR-DELİORMANLI, E. ÇELİK and M. POLAT, “Investigation The Drying Behaviour of Ceramic Suspension
Droplets”, Afyon Kocatepe University Journal of Science, 273-277, December 2009.
18- R. YİGİT, S. YILDIRIM and E. ÇELIK, “The Improvement of Metal Cutting Processing Using Al 2O3 Nanoparticles”,
Afyon Kocatepe Üniversitesi Fen Bilimleri Dergisi, 2012 (in press).
19- M. BEKTAŞ, I. BİRLİK, A.N. ÖZCİVAN and E. ÇELİK, “Production and Characterization of BaIrO3 Doped
Superconducting YBCO Thin Films by TFA-MOD Method”, Afyon Kocatepe Üniversitesi Fen Bilimleri Dergisi, 2012 (in
press).
20- R. YIĞIT, S. YILDIRIM and E. ÇELIK, “Investigation of the Effect of CuO Nanofluid in Minimum Quantity Lubrication
Machining”, Afyon Kocatepe Üniversitesi Fen Bilimleri Dergisi, 2012 (in press).
21-S. ELBEYLİ, M. EROL, I. BİRLİK, M.F. EBEOĞLUGİL, Ö. MERMER, R. YİĞİT, S. TAŞ, M. TOPARLI ve E. ÇELİK,
“Gaz Sensörleri İçin Sol-jel Yöntemiyle Cam Altlıklar Üzerine Cu:SnO 2 Filmlerin Üretilmesi ve Karakterizasyonu”, Afyon
Kocatepe Üniversitesi Fen Bilimleri Dergisi, 2012 (in press).
22- E. ÇELIK, I. BIRLIK, M. BEKTAŞ, O. ÇULHA and M. TOPARLI, “Improvement of Flux Pinning Properties of YBCO
Superconducting Films with BaMeO3 (Me:Zr, Mn, Hf and Ir) Perovskite Nanoparticles by TFA-MOD Technique”, Afyon
Kocatepe Üniversitesi Fen Bilimleri Dergisi, 2012 (in press).
23- I. BİRLİK, E. ÇELİK and B. HOLZAPFEL, “GdBaCuO Ceramic Superconducting Films Prepared by Chemical Solution
Deposition Method”, Afyon Kocatepe Üniversitesi Fen Bilimleri Dergisi, 2012 (in press).
24- S. YILDIRIM ve E. ÇELİK, “Alev Geciktirici Huntit ve Hidromanyezit Nanopartikül Takviyeli Polimerik Kompozit
Kaplamalar”, Afyon Kocatepe Üniversitesi Fen Bilimleri Dergisi, 2012 (in press).
25- M. EROL, Ç.G. BAŞKURT, G. ÖNER, A. PALA İYİLİKÇİ ve E. ÇELİK, “Su Bazlı Metilen Mavisi Çözeltisinin
Fotokatalitik Parçalanması İçin K2La2Ti3O10 Filmlerin Üretimi”, Afyon Kocatepe Üniversitesi Fen Bilimleri Dergisi, 2012 (in
press).
26- S. YILDIRIM, M. YURDDAŞKAL, B. ÖZTÜRK, T. BATAR ve E. ÇELİK, “Bir Katalizör Malzeme Olarak Grafen
Üretimi İçin Alev Sprey Piroliz Yöntemiyle Nanoboyutlu MgO Tozlarının Sentezi ve Özellikleri”, Afyon Kocatepe Üniversitesi
Fen Bilimleri Dergisi, 2012 (in press).
27- M. ÖZDEMİR KÖKLÜ, F. SÜMER, Ö. MERMER, S. OKUR, Ü. CÖCEN and E. ÇELİK, “Gas and Humidity Sensing
Properties of Pure and Ru-Doped TiO2 Nanofibers”, Afyon Kocatepe Üniversitesi Fen Bilimleri Dergisi, 2012 (in press).
28- A.N. ÖZCİVAN, I. BİRLİK, M. BEKTAŞ ve E. ÇELİK, “STO Altlık Üzerine Üretilen YBCO Kaplama İçin Kullanılan
PLD Sisteminde Yapılan Parametre Düzenlemeleri ve Karakteristik Verifikasyonu”, Afyon Kocatepe Üniversitesi Fen Bilimleri
Dergisi, 2012 (in press).
29- M. F. EBEOĞLUGİL and E. ÇELİK, “New Insight on Pb(Mg1/3Nb2/3)O3 Nano Scale Powders for Thin Film Capacitor”,
Afyon Kocatepe Üniversitesi Fen Bilimleri Dergisi, 2012 (in press).
30- E. ÇELİK, I. BİRLİK and Y.S. HASCİCEK, “Synthesis and Characterization of Pr 2O3 Buffer Layers by Sol-Gel Process for
YBCO Surface Coated Conductors”, Afyon Kocatepe Üniversitesi Fen Bilimleri Dergisi, 2012 (in press).
31- Ö. MERMER, M. EROL, M. BEKTAŞ ve E. ÇELİK, ”The Effect of Ru Substitution on the Electrical and Humidity
Sensor Properties of Semiconductor Tin Oxide Film”, Afyon Kocatepe Üniversitesi Fen Bilimleri Dergisi, 2012 (in press).
32- N.F. AK AZEM, I. BIRLIK, R. YIĞIT, M. EROL, S. YILDIRIM ve E. ÇELIK, “Preparation and Characterization of SiO 2
Nanofluid by Flame Spray System for Machining Process”, Afyon Kocatepe Üniversitesi Fen Bilimleri Dergisi, 2012 (in press).
33- S. TAŞ, M. EROL, M. TOPARLI ve E. ÇELİK, “Magnetron Saçtırma Tekniğinde Kullanılacak Olan Hedef Malzemeleri
İçin SnO2 Tozların Sol-jel Yöntemi ile Üretilmesi”, Afyon Kocatepe Üniversitesi Fen Bilimleri Dergisi, 2012 (in press).
34- I. BİRLİK, N.F. AK AZEM, R. YİĞİT, M. EROL, S. YILDIRIM, M. YURDDAŞKAL, O. SANCAKOĞLU and E. ÇELİK,
“Preparation and Characterization of TiO2 Nanofluid by Sol-gel Method for Cutting Tools”, Afyon Kocatepe Üniversitesi Fen
Bilimleri Dergisi, 2012 (in press).
35- E. ÇAKIROĞLU, M. EROL, S. KOCAKUŞ and E. ÇELIK, “Synthesis of V, Er and Ce Substitued TiO2 Films via Sol-gel
Method to Degrade Cyanide Content in Waste Water Under UV/Sunlight Source”, Afyon Kocatepe Üniversitesi Fen Bilimleri
Dergisi, 2012 (in press).
36- I. KESKIN, E. OZKAN and E. CELIK, “TiO2 Based Photocatalitic Surfaces: Mechanism and Applications”, Machine
Specialization, 2012 (in press).
37- A. ILERI, I. KAYATEKIN, O. CULHA, M.F. EBEOGLUGIL and E. CELIK, “Production and Characterization of Alumina
Substrates for Gas Sensors”, J. Gazi University, Enginering and Architecture, 2012 (in press).
10.2. Bildiriler
10.2.1. Uluslarası Araştırma Bildirileri
65- N. LKHAGVAJAV, I. YAŞA, E. CELIK and O. SARI, “Antibacterial Effects of Colloidal Nano Silvers on Leather”, 1.
International Leather Engineers Symposium, pp. 187-194, Izmir, Turkey, April 2009.
66- I.BIRLIK, E. CELIK, B. HOLZAPFEL, L. SCHULTZ, “Flux Pinning Improvement of YBCO Superconducting Films with
BaZrO3 Nanoparticles Prepared by Chemical Solution Deposition Method”, 2nd Dresden-Karlsruhe Seminar on Materials and
Applications in Superconductivity, Colditz, Germany, May 2009.
67- A. GURBUZ, N. ONAR, A. AKSIT, E. CELIK and I. OZDEMIR, “Structural, Thermal and Magnetic Properties of Mn, Cu,
Co and X (X=Sr and Ni) Subsituted-Barium Ferrite Powders Prepared by Sol-Gel Method”, 5th Nanoscience and
Nanotechnology Conference- NanoTr-5, pp. 194, Eskişehir, Turkey, June 2009.
68- M.F. EBEOGLUGIL and E. CELIK, “The Processing of Pb(Mg1/3Nb2/3)O3 (PMN) Nano Scale Powders for Thin Film
Capacitor Coatings”, 5th Nanoscience and Nanotechnology Conference- NanoTr-5, pp. 302, Eskişehir, Turkey, June 2009.
69- H. ATAY YILMAZ and E. CELIK, “Use of Huntite and Magnetite Minerals in Plastics as a Flame Retardant”, 5th
Nanoscience and Nanotechnology Conference- NanoTr-5, pp. 368, Eskişehir, Turkey, June 2009.
70- O. SANCAKOGLU, M. EROL and E. CELIK, “Nanoindentation Study on Co-deposited Nano-scale Ceramic Powders
with Metals via Electrodeposition System”, 5th Nanoscience and Nanotechnology Conference- NanoTr-5, pp.418, Eskişehir,
Turkey, June 2009.
71- I. BİRLİK, E. ÇELİK, M. ERBE and B. HOLZAPFEL, “The Zr-doped REBCO Films Grown by TFA-MOD Method”,
International Conference on Superconductivity and Magnetism (ICSM 2010), Antalya, Turkey, April 2010.
72- H. YILMAZ ATAY and E. ÇELİK, ”Investigations of Radar Absorbing Activity of Barium Hexaferrite Reinforced Polymer
Composite Coatings”, International Conference on Superconductivity and Magnetism (ICSM 2010), Antalya, Turkey, April
2010.
73- A. PASİNLİ, O. CULHA, E. CELİK and M. TOPARLI, “A Model for the Calculation of Mechanical Properties of
Hydroxyapatite Coatings on Ti6Al4V Substrate Using Finite Element Methods”, 1st International Symposium of Computing
Science and Engineering, Kuşadası, Aydın, Turkey, June 2010.
74- M. TOPARLI, A. PASİNLİ, H. YILDIZ, E. CELİK and R.S. AKSOY, “Synthesis of Hydroxyapatite Coatings on Ti6Al4V
Substrate by Biomimetic Method”, 2nd International Symposium on Sustainable Development, pp.275-282, Sarjevo, Bosnia and
Herzegovina, June 2010.
75-O. SANCAKOĞLU, M. EROL, M. C. ERTAN, B. AGADAY and E. ÇELİK, “Enhanced Wear Performance of SiC/Al2O3
Nano-Powder Reinforced Composite Coatings”, 6th Nanoscience and Nanotechnology Conference, pp. 176, İzmir, Turkey,
June 2010.
76- I. BİRLİK, B. HOLZAPFEL and E. ÇELİK, “Nanoparticle Doped YBCO Films Prepared by Chemical Solution Deposition
Method”, 6th Nanoscience and Nanotechnology Conference, pp. 221, İzmir, Turkey, June 2010.
77- M. BEKTAŞ, M. EROL, O. SANCAKOĞLU, M. F. EBEOĞLUGİL and E. ÇELİK, “Effect of Ru and Al Substitutions on
Sol-Gel Derived ZnO Thin Films”, 6th Nanoscience and Nanotechnology Conference, pp. 282, İzmir, Turkey, June 2010.
78- M. BEKTAŞ, M. EROL, O. SANCAKOĞLU, M.F. EBEOĞLUGİL, H. SÖZBİLEN, Ö. MERMER and E. ÇELİK,
“Structural, And Electrical Properties of Ru Doped ZnO Film Fabricated By Sol-Gel Technique And Using For Gas Sensing”,
6th Nanoscience and Nanotechnology Conference, pp. 339, İzmir, Turkey, June 2010.
79-M. ÖZDEMİR, A. SÜSLÜ, Ü. CÖCEN and E. ÇELİK, “Fabrication of Alumina Borate Nanofiber by Electrospinning
Technique”, 6th Nanoscience and Nanotechnology Conference, pp. 374, İzmir, Turkey, June 2010.
80- M. ZEYREK, K.ERTEKİN, M. GÖÇMENTÜRK, Y. ERGÜN, M.ÖZDEMİR and E.ÇELİK, “Ionic Liquid Doped
Electrospun Polymer Composite Fibers for Copper (II) Sensing”, 6th Nanoscience and Nanotechnology Conference, pp. 395,
İzmir, Turkey, June 2010.
81-Y. ÖZTÜRK, M. EROL, E.ÇELİK and İ. AVGIN, “Cerium-Doped Yttrium Iron Garnet Thin Films with Nano Regions
Prepared by Sol-Gel Method”, 6th Nanoscience and Nanotechnology Conference, pp. 412, İzmir, Turkey, June 2010.
82- H. SÖZBİLEN, M. EROL, M. F. EBEOĞLUGİL, M. BEKTAŞ, O. SANCAKOĞLU, Ö. MERMER, E. ÇELİK, “Influence
of Al Incorporation on the Structural and Optical Properties of Semiconductor Tin Oxide Film on Glass Substrate by Sol-Gel
Technique and Potential Application of Gas Sensors”, 6th Nanoscience and Nanotechnology Conference, pp. 430, İzmir,
Turkey, June 2010.
83- M. EROL, M. BEKTAŞ, O. SANCAKOĞLU, M. F. EBEOĞLUGİL , H. SÖZBİLEN, Ö. MERMER, and E. ÇELİK, “The
Effect of Ru Substitutions on the Structural, Electrical and Optical Properties of Semiconductor Tin Oxide Film Derived by SolGel Method”, 6th Nanoscience and Nanotechnology Conference, pp. 431, İzmir, Turkey, June 2010.
84- H. YILMAZ ATAY, İ. YAŞA and E. ÇELİK, “Synthesis of Ag Nanoparticles and Investigations of Their Antibacterial
Activity in the Polymer Composite Coatings“, 6th Nanoscience and Nanotechnology Conference, pp. 506 İzmir, Turkey, June
2010.
85-H. YILMAZ ATAV and E. ÇELİK, “Electrical Behaviours of Flame Retardant Huntite and Hydromagnesite Reinforced
Polymer Composites for Cable Applications” 6th Nanoscience and Nanotechnology Conference, pp. 715, İzmir, Turkey, June
2010.
86- S. KAÇMAZ, K.ERTEKİN, Y. ERGÜN, A. SÜSLÜ and E.ÇELİK, “Fluorecence Based Hg(II) with Electrospun
Nanofibers”, 6th Nanoscience and Nanotechnology Conference, İzmir, Turkey, June 2010.
87- H. YILMAZ ATAY and E.ÇELİK, “Barium Ferrite Nanopowder Reinforced Polymeric Composites for Radar Absorbing
Materials”, International Conference on Nanoscale Magnetism (ICNM-2010), pp. 212, Gebze, Turkey, October 2010.
88- O.CULHA, M. TOPARLI, E. CELİK, H. GÜZELAYDIN and T. AKSOY, “Extraction of the Mechanical Properties of
HVOF Sprayed WC-based Cermet Coatings via Instrumented Sharp Indentation Analysis”, 13th International Materials
Symposium (IMSP 2010), pp.92, Denizli, Turkey, October 2010.
89- H. YILMAZ ATAY and E.ÇELİK, “Investigation of Antibacterial Activity of Chitosan in a Dye Material as an Antibacterial
Coating”, 13th International Materials Symposium (IMSP 2010), pp.114, Denizli, Turkey, October 2010.
90- M.F. EBEOGLUGIL, O. ÇULHA, E. CELIK and M. TOPARLI, “Production and Indentation Analysis of Pb(Mg1/3Nb2/3)O3
Capacitor Coatings”, 13th International Materials Symposium (IMSP 2010), pp.172, Denizli, Turkey, October 2010.
91-H. SÖZBİLEN, M.EROL, M. BEKTAŞ, Ö. MERMER and E. CELIK, “Structural, Electrical and Optical Properties of
Semiconductor Ru-SnO2 Films Derived by Sol-gel Method and Humidity Sensor Application”, 7th Nanoscience and
Nanotechnology Conference İstanbul, Turkey, June 2010.
92- K. ERTEKİN, S. KAÇMAZ, A. SÜSLÜ, M. ERGUN, M. GÖÇMENTÜRK, E. ÇELİK and U. CÖCEN, “A Novel
Flourescent Queching Based Fe(III) Nanosensor Prepared By Electrospinning”, Molecular Sensors and Molecular Logic Gates
Conference, Antalya, Turkey, October 2010.
93- M. ZEYREK, K. ERTEKİN, A. SÜSLÜ, E. CELİK and U. CÖCEN, “Ionic Liquid Doped Electrospun Polymer Composite
Nanofibers For Hg(II) Sensing”, Molecular Sensors and Molecular Logic Gates Conference, Antalya, Turkey, October 2010.
94- M. ZEYREK, K. ERTEKİN, S. AYDOĞDU, Ö. HAKLI, S. İÇLİ, A. SÜSLÜ, E. CELİK and U. CÖCEN, “Flourescence
Based Ag(I) Sensing With Electrospun Nanofibers”, Molecular Sensors and Molecular Logic Gates Conference, Antalya,
Turkey, October 2010.
95- K.ERTEKİN, M.ZEYREK, M. OZDEMİR, A. SÜSLÜ and E.CELİK, “Electrospun Polymer Composite Fibers For Oxygen
Sensing”, X. Europen Conference on Optical Chemical Sensors and Biosensors, Prague, Czech Republic, March 2010.
96- Y. BABUR, A. TUMBUL, H.I. MUTLU and E. ÇELİK, “Dielectric Properties of Thin Films”, 29th International Physics
Congress, Bodrum, Turkey, September 2012.
97- M.EROL, M. YURDDAŞKAL, Ö. MERMER and E. ÇELİK, “Graphite Nanoparticles Reinforced Polymeric
Nanocomposites for Flexibles temperature Sensors”, 8th Nanoscience and Nanotechnology Congress, Ankara, Turkey, June
2012.
98- M. YURDDAŞKAL, S. YILDIRIM, M.EROL and E. ÇELİK, “Production and Characterization of Fe2O3 Nanoparticles via
Flame Spray Pyrolysis”, 8th Nanoscience and Nanotechnology Congress, Ankara, Turkey, June 2012.
99- M.Z. ONGUN, K. ERTEKİN, C. GÜNDOĞDU, Ö. ÖTER, Y. ERGUN and E. ÇELİK, “Determination of Silver (I) , Iron
(III), Mercury Ions at Nanomolar and/or Sub-nanomolar Levels with Nanofibrous Materials and Continous Thin Films”, 8th
Aegan Analytic Chemistry Days, pp. 151, Urla, İzmir, Turkey, September 2012.
100- S. KAÇMAZ, K. ERTEKİN, Ö. ÖTER, C. GÜNDOĞDU, Y. ERGUN and E. ÇELİK, “A Nano-scale Fluorescent pH
Sensor for Alkaline Reagion”, 8th Aegan Analytic Chemistry Days, Urla, İzmir, Turkey, September 2012.
101- M. Z. ONGUN, K. ERTEKIN, S. AYDOGDU, D. MERCAN, O. OTER, E. CETINKAYA and E. CELIK, “Intensity and
Lifetime Based Sensing of Fe (III) with Electrospun Nanosensors”, 8th Aegan Analytic Chemistry Days, pp. 42, Urla, İzmir,
Turkey, September 2012.
102- M. Z. ONGUN, K. ERTEKIN, L. GUNDOGDU, O. OTER, Y. ERGUN and E. CELIK, “Multiple Sensing of Fe (III) and
Hg (II) with Embedded Carbazole Derivatives”, 8th Aegan Analytic Chemistry Days, pp. 40, Urla, İzmir, Turkey, September
2012.
103- M.Z. ONGUN, K. ERTEKİN, M. GÖÇMENTÜRK, O. OTER, Y. ERGÜN and E. CELİK, “Selective Sub-nanomolar
Determination of Fe (III) Ions with Electrospun Nanofibers”, 8th Aegan Analytic Chemistry Days, pp. 16-20, Urla, İzmir,
Turkey, September 2012.
104- G. SABANCI, O. OTER, P. KOSE, E. SUBASI, K. ERTEKIN, H. TEMEL and E. CELIK, “Characterization of Novel
Fluorescent Palladium Complexes by Steady State and Time Resolved Fluorescence Spectroscopy”, 8th Aegean Analytical
Chemistry Days, pp.2, 138, 16-20 September 2012, Urla, İzmir, Turkey.
105- S. KACMAZ, K. ERTEKIN, D. MERCAN, O. OTER , E. CETİNKAYA and E. CELİK, “Design of a Nano-Scale
Fluorescent Optical Chemical Sensor for Ca (II)”, 8th Aegean Analytical Chemistry Days, pp.3 43, 189,16-20 September 2012,
Urla, İzmir, Turkey.
106-S. KACMAZ, K. ERTEKIN, D. MERCAN, O. OTER, E. CETİNKAYA and E. CELİK, “A Novel Fluorescent Nanosensor
for Picomolar Determination of Cu (II)“, 8th Aegean Analytical Chemistry Days, pp. 3 41, 187, 16-20 September 2012, Urla,
İzmir, Turkey.
107- R. AZRAK, K. ERTEKIN, O. OTER, M.Y. ERGÜN and E. CELIK, “Optical Chemical Nano-sensor for Picomolar
Sensing of Fe (III) Ions”, 8th Aegean Analytical Chemistry Days, 16-20, pp. 3 50, 196, September 2012, Urla, İzmir, Turkey.
108- R. AZRAK, K. ERTEKIN, O. OTER and E. CELIK, “Fluorescence Lifetime Based Sensing Attempt Exploiting HPTS in
Form of Nano-fibers”, 8th Aegean Analytical Chemistry Days, pp. 3 51, 197,16-20 September 2012, Urla, İzmir, Turkey
109- S. KACMAZ, O. OTER, K. ERTEKIN, D. MERCAN, E. CETINKAYA and E. CELIK, “A Nano-Based Fluorescent
Optical Chemical Sensor for Cu (II) Ions”, NanoTR-9: 9. Nanoscience and Nanotechnology Conference, Book of
Abstracts, pp. 445, 24-28 June 2013, Erzurum, Turkey.
110- S. KACMAZ, O. OTER, K. ERTEKIN, C.G. HIZLIATES, M.Y. ERGUN and E. CELIK, “Multi-functional
Fluorescent Nanosensor for pH and Ag (I) ions”, NanoTR-9: 9. Nanoscience and Nanotechnology Conference, Book
of Abstracts, pp. 45224-28 June 2013, Erzurum, Turkey.
111- S. KACMAZ, O. OTER, K. ERTEKIN, C.G. HIZLIATES, M.Y. ERGUN and E. CELIK, “A Nano-based Optical
Sensor for pH/Ag(I) ions prepared by Electrospinning”, NanoTR-9: 9. Nanoscience and Nanotechnology Conference,
Book of Abstracts, pp.446, 24-28 June 2013, Erzurum, Turkey.
112- M.EROL, O. SANCAKOĞLU, M. YURDDAŞKAL, S. YILDIRIM and E. ÇELİK, “Sol-gel and Flame Spray Pyrolysis
Assisted TiO2 Nanopowders: Production, Characterization and Photocatalytical Kintetics”, 1st International Porous and Powder
Materials Symposium & Exhibition, Book of Abstracts, pp.91, Izmir, Turkey, 3-6 September 2013.
113- S. YILDIRIM, E. ÇELİK and E.B. ERTUŞ, “Usage of Flame Retardant Nanopwder in Paints”, 1st International Porous and
Powder Materials Symposium & Exhibition, Book of Abstracts, pp.115, Izmir, Turkey, 3-6 September 2013.
114- S. YILDIRIM, T. DİKİCİ, O. ÖTER, K. ERTEKİN and E. ÇELİK, “Structural and Photoluminescent Properties of CeO 2
and Eu+3/Sm+3 Doped CeO2 Nanopowders Prepared by Sol-Gel Method”, 1st International Porous and Powder Materials
Symposium & Exhibition, Book of Abstracts, pp.121, Izmir, Turkey, 3-6 September 2013.
115- E.B. ERTUŞ, S. YILDIRIM and E. ÇELİK, “Sol-gel Synthesis and Characterization of BaFe12O19 as a Radar Absorbing
Material”, 1st International Porous and Powder Materials Symposium & Exhibition, Book of Abstracts, pp.123, Izmir, Turkey,
3-6 September 2013.
116- E.B. ERTUŞ and E. ÇELİK, “Sol-gel Synthesis and Characterization of SrAl14O25: Eu+3/Dy+3 Powder for Afterglow
Painting Applications”, 1st International Porous and Powder Materials Symposium & Exhibition, Book of Abstracts, pp.123,
Izmir, Turkey, 3-6 September 2013.
117- N. ALTUĞ KAHRAMAN, F. BAKAL, M. EROL, G. KURŞUN, A. PALA and E. ÇELİK, “Production, Characterization
and Photocatalytical Kintetics of Sol-gel Derived K2La2Ti3O10 Powders”, 1st International Porous and Powder Materials
Symposium & Exhibition, Book of Abstracts, pp.129, Izmir, Turkey, 3-6 September 2013.
Not: (*) Makalelerin SCI’de yayınlandığını ve yayınlanacağını göstermektedir.
10.3. Ulusal Konferans Bildirileri
3- E. CELIK, O. KALYONCUOGLU, M.F. EBEOGLUGIL and H. ASLAN, “ZnO Semiconducting Films on Glass Susbtrate
by Sol-gel Technique for Gas Sensors”, I. Ulusal Metal, Yarıiletken ve Oksit Materyallerin Üretiminde Kullanılan Sistemler ve
Analiz Teknikleri Kongresi, Eskişehir, Turkey June 2009.
4- M. EROL, O. SANCAKOĞLU, E. ÇELİK, “İzmir Sanayisi Kirli Su Örneklerinin Sol-jel Yöntemi ile Üretilmiş Fotokatalitik
Özellik Gösteren Ru-TiO2 Kaplamalar Kullanılarak Organik İçerikçe Temizlenmesi I. Ulusal Metal, Yarıiletken ve Oksit
Materyallerin Üretiminde Kullanılan Sistemler ve Analiz Teknikleri Kongresi, Eskişehir, Turkey June 2009.
5- H. ATAY YILMAZ, E. CELIK, “Alev Geçiktirici Olarak Plastiklerde Huntit ve Hidromanyezit Minerallerinin Kullanımı”, I.
Ulusal Metal, Yarıiletken ve Oksit Materyallerin Üretiminde Kullanılan Sistemler ve Analiz Teknikleri Kongresi, Eskişehir,
Turkey June 2009.
6- M. F. EBEOĞLUGİL, Ş. TURAN, E. ÇELİK, “Sol-jel Yöntemi Kullanılarak Kurşun Magnezyum Niyobat İnce Film Üretimi
ve Karakterizasyonu”, I. Ulusal Metal, Yarıiletken ve Oksit Materyallerin Üretiminde Kullanılan Sistemler ve Analiz Teknikleri
Kongresi, Eskişehir, Turkey June 2009.
7- E. ÇİNKILIÇ, M.Ç. GEBİZLİ, M. EROL, Y. ÖZTÜRK, İ. AVGIN, E. ÇELİK, “Ce0,1Y2,9Fe5O12 ve Ce0,1Yb0,05 Y2,85Fe5O12
Stokiometrisine Sahip Garnet Esaslı Manyeto-optik İnce Filmlerin Sol-jel Metodu Kullanılarak Üretilmesi ve
Karakterizasyonu”, I. Ulusal Metal, Yarıiletken ve Oksit Materyallerin Üretiminde Kullanılan Sistemler ve Analiz Teknikleri
Kongresi, Eskişehir, Turkey June 2009.
8- O. SANCAKOĞLU, M. EROL, B. AGADAY, E. ÇELİK, “Mikron-altı Al2O3 Seramik Takviyeli, Zn Metal Matriksli
Kompozit Kaplamaların Elektrodepozitleme Tekniğiyle Üretimi”, I. Ulusal Metal, Yarıiletken ve Oksit Materyallerin
Üretiminde Kullanılan Sistemler ve Analiz Teknikleri Kongresi, Eskişehir, Turkey June 2009.
9- O. SANCAKOĞLU, D. SADILLIOGLU, M.C. ERTAN, B. AGADAY, İ. ÖZDEMİR, E. ÇELİK, “Mikron-altı Boyutta
Seramik Partiküllerin Cr Metali ile Elektrokimyasal Yöntemle Depozitlenmesi”, I. Ulusal Metal, Yarıiletken ve Oksit
Materyallerin Üretiminde Kullanılan Sistemler ve Analiz Teknikleri Kongresi, Eskişehir, Turkey June 2009.
10- M. EROL, O. SANCAKOĞLU, E. ÇELİK, “Seramik Katkılarla Elde Edilen Polistren Matriksli Kompozit Kaplamaların
Yanmaya Karşı Özelliklerinin İncelenmesi”, I. Ulusal Metal, Yarıiletken ve Oksit Materyallerin Üretiminde Kullanılan Sistemler
ve Analiz Teknikleri Kongresi, Eskişehir, Turkey June 2009.
11- H. YILMAZ ATAY ve E. ÇELİK, “Mineral Katkılı Polimer Malzemelerin Yanmazlık ve Mekanik Özelliklerinin
Araştırılması”, 3. Ulusal Polimer Bilimi ve Teknolojisi Kongresi, Kocaeli, Turkiye, Mayıs 2010.
12-O. ÇULHA, M.F. EBEOĞLUGİL, M. TOPARLI, E. ÇELİK, Ö. MERMER ve H.B. ÜNAL, “Seralarda Yarıiletken Sensör
Teknolojisinin Kullanımı ve Üretim Olanakları” , I.Ulusal Sulama ve Tarımsal Yapılar Sempozyumu, Kahramanmaraş, Mayıs
2010.
13- M. ZEYREK, K. ERTEKİN, A. SUSLU, E. CELİK, E. SUBASI and H. TEMEL, “Kalay (II) Katyonunun Elektro-eğirme
Yöntemi ile Hazırlanmış Fiberler ile Sub-nanomolar Düzeyde Tayini”, 24. National Chemistry Conference, Zonguldak, Turkey
June-July 2010.
14-M. BEKTAŞ, I. BİRLİK, O. CULHA, M.TOPARLI and E. ÇELİK, “Synthesis and Characterization of BZO doped YBCO
Superconducting Films with Different Type of Precursors”, 5th National Superconductivity Symposium, İzmir, 03-06 July 2011.
15- O. CULHA, I. BİRLİK, M. BEKTAŞ, A. H. GÜZELAYDIN, M.TOPARLI and E. ÇELİK, “Indentation Modelling of
YBCO Based Thin Films”, 5th National Superconductivity Symposium, İzmir, 03-06 July 2011.
16- Y. BABUR, A. TUMBUL, H.I. MUTLU and E. ÇELİK, “Polimerik İnce Filmlerein Dielektrik Özellikleri”, 29. Uluslar arası
Türk Fizik Derneği Konferansı, Temmuz 2012.
10.4. Davetli Makaleler
2-I. BIRLIK, O. CULHA, M. TOPARLI and E. CELIK, “Flux Pinning Propeties of YBCO Superconducting Films by TFAMOD Method”, 4. Ulusal Süperiletkenler Sempozyumu, Trabzon, 10-13 Ağustos 2009.
Superconducting Films with BaMeO3 (Me:Zr, Mn, Hf and Ir) Perovskite Nanoparticles by TFA-MOD Technique”, 8.
Uluslararası Katılımlı Seramik Kongresi, Afyon, 22-24 Kasım, 2012.
Superconducting Films with BaMeO3 (Me:Zr, Mn, Hf and Ir) Nanoparticles by TFA-MOD Technique for Health Applications”,
Biyo Nano Teknoloji Kongresi, Fatih Üniversitesi, İstanbul, 1-3 Ekim, 2013.

Özgeçmiş PDF indir - Mühendislik Mimarlık Fakültesi

Transkript

Benzer belgeler

özgeçmiş - Bahçeşehir Üniversitesi