D-Link DSL 500G için ayarları

Celotex 4016 YAZILIM
İLDVR HARDWARE YAZILIM
DVR2000 25 FPS YAZILIM
EX-3004 YAZILIM
DVR 8008--9808 YAZILIM
TE-203 VE TE-20316 SVDVR YAZILIM
VGUARD EXP YAZILIM
80-8080-8081
80-4500-4600
5050-5555-1999-80
5555
80-9000-9001-9002
80-20002200......2216
48100-48101-48103
ADSL Modemlerde Port yönlendirmeleri örneklerle
anlatılmıştır.Port yönlendirmelerinde kullanılan TCP Port
numaraları örnek vermek amacıyla rastgele seçilmiş
numaralardır. MODEMLERDE FİREWALL MUTLAKA
DİSABLE (KAPALI) OLMALIDIR.
D-Link DSL 500G için ayarları
10- Şimdi internet explorer ı açın ve http://modeminizin internal IP nosunu yazın (not
almıştınız)
(örnek http://192.168.1.1)
11- Size user name ve password soracak değiştirmediyseniz her ikisininde default
değeri admin dir yazın OK deyin Aşağıdaki menu çıkacak.
12- Önce "services" sonrada "NAT" ı yıklayın
13- Sayfanın ortasındaki "NAT Options" açılır menusünde "NAT Rule Entry" seçin.
14- Sayfanın altındaki "Add" butonuna basın
15-Aşağıdaki ayarları yazın (siz 192.168.1.10 yerine 192.168.1.8 veya daha önce
yazdığınız bilgisayarınızın IP nosunu yazın ve aşağıda 4661 yazan yere 4662 yazın)
Submit deyin sonra Rule entry e tekrar girin ve Rule ID yi bir artırın, aynı şeyleriTCP
yerine UDP ve 4662 yarine 4672 yazarak tekrarlayın.
Ekranın solunda admin dropdown menüsünden "Commit and Reboot" seçin ve save
edin. sonra reboot. (Erhan'ın katkılarına teşekkür ediyoruz ;))
Şimdi çıkıp emuleye tekrar girin yüksek ID aldınız demektir.
AŞAĞIDA İNGİLİZCE ÖRNEK VAR
Step 1:
To setup port forwarding on this router your computer needs to have a static ip
address. Take a look at our Static IP Address guide to setup a static ip address.
Step 2:
Open a web browser like internet explorer or Netscape.
Enter the ip address of your router in the address bar of your browser. In the picture
above the address bar has http://www.google.com in it. Just replace all of that with
the ip address of your router. By default the ip address should be set to 10.1.1.1.
Step 3:
You should now be prompted for a username and password. Go ahead and enter the
username and password, to get into your router. By default the username is admin
and the password is also admin . Once you have logged in you should see the
following menu.
Step 4:
Click the plus sign in front of Services on the left hand side of your screen. Go ahead
and click Nat that dropped down under services.
Step 5:
In the middle of this page you will see a NAT Options drop down box. Click the down
arrow and select NAT Rule Entry .
Step 6:
At the bottom of the page click Add . You should now see another window.
Step 7:
This router only allows you to forward one port at a time.
The window you are looking at will most likely not look like the picture above. This
window changes depending upon what is in the Rule Flavor drop down box. Go
ahead and click the drop down arrow now. Select RDR from the list. Now your
window should look something like the screenshot above. Enter a number in the
Rule ID box. This number needs to be unique, so some number that was not listed
on the services page. For port range/ranges information check the Ports list page or
the software manufacture's homepage. Make sure All is selected in the IF Name box.
Once again select the protocol type but this time in the Protocol box. If you are
unsure of the protocol type just set both of the previous boxes to Any . I'm going to
assume that you only want to forward these ports to one ip address. Go ahead and
enter that local ip address in both the Local Address From and the Local Address
To boxes. If you have mutiple external address you can enter a range of private
addresses here. Then you would enter another range of the same size in the external
ip address boxes. Well back to my assumption that you are only trying to forward one
ip. Enter your external ip address in both the Global Address From and the Global
Address To boxes. Your external ip address is 81.213.168.23 . Enter the port you
wish to forward into the Destination Port From , the Destination Port To , and the
Local Port boxes.
Step 8:
Drop down Admin on the left hand side of your screen. Select Commit and Reboot
that dropped down under admin. Use this page to save the settings in your router.
And that's it! You're done!