Assoc. - Celal Bayar University

Assist. Prof. Dr. Erkan DOGAN
EDUCATION
Degree
University
Department / Program
Undergrad
M.S.
Ataurk University
Civil Engineering
Middle East Technical
University
Graduate School of Natural and Applied
Sciences- Engineering Sciences
Ph.D.
Years
1998-2002
2003-2010
CONTACT INFORMATION
Address
Phone
Fax
e-mail
Web page
Celal Bayar University,
University Faculty of Engineering, Dept. of Civil Engineering,, Muradiye, Manisa
0 236 241 21 41
[email protected]
POSITIONS & EMPLOYMENT
Affiliation
Middle East technical University
Ataturk University
Celal Bayar University
Position
Research Assistant
Research Assistant, Phd
Assistant Professor, Phd
Years
2004-2011
2011-2012
2012-
ADMINISTRATIVE ACTIVITIES & COMMITTEE MEMBERSHIP
Affiliation
Position
Years
THESIS
M.S.
Ph.D.
Optimum design of rigid and semi
semi-rigid steel sway frames including soil-structure
structure interaction
(Advisor:: Prof. Dr. Mehmet Polat SAKA)
Research Interests
Foreign Language
Steel structures, Optimization methods
English
ORIGINAL PUBLICATIONS
Articles Published in Journals Indexed by SCI
O. Hasançebi, S. Çarbaş, E. Doğan, F. Erdal, M. P. Saka, “Performance evaluation of metaheuristic
1
search techniques in the optimum design of real size pin jointed structures”, Computers and
Structures, Vol. 87, No. 5-6, 284-302, (2009).
Hasançebi, O., Çarbaş, S., Doğan, E., Erdal, F. and Saka, M.P., “Comparison of non-deterministic search
2
techniques in the optimum design of real size steel frames”, Computers and Structures, Vol. 88, No.
17-18, 1033-1048, (2010).
F. Erdal, E. Doğan, M. P. Saka, “Optimum design of cellular beams using harmony search and particle
3
swarm optimizers”, Journal of Constructional Steel Research, Vol. 67, No.2, 237- 247 (2011).
E. Doğan and M. P. Saka, “Optimum Design of Steel Frames to LRFD- AISC Using Particle Swarm
4
Optimization”, Advances in Engineering Software, Vol. 46, No.1, 27-34 (2012).
5
6
7
8
Articles Published in Other International Refereed Journals
E. Doğan, O. Hasançebi and M. P. Saka, “A Refinement of Discrete Particle Swarm Optimization for
1
Large-Scale Truss Structures”, Asian Journal of Civil Engineering, Vol. 10, No.3 (2009).
O. Hasançebi, E. Doğan, “Optimizing single span steel truss bridges with simulated annealing”, Asian
2
Journal of Civil Engineering, Vol. 11, No.6, 763- 775 (2010).
O. Hasançebi, E. Doğan, “Evaluation of topological forms for weight-effective optimum design of
3
single-span steel truss bridges ”, Asian Journal of Civil Engineering, Vol. 12, No.4, 431- 448 (2011).
F. Erdal, E. Doğan, M. P. Saka, “The effect of member grouping on the optimum design of grillages
4
with particle swarm method”, International Journal of Engineering and Applied Sciences, Vol. 3, No. 3,
47-59 (2011).
5
6
7
8
Articles Published in National Refereed Journals
1
2
3
4
5
6
7
8
International Conference Proceedings
E. Doğan and M. P. Saka, “Optimum Design of Steel Frames to LRFD- AISC Using Particle Swarm
1
Optimization”, Proceedings of The Ninth International Conference on Computational Structures
Technology, 2-5 September, 2008, Athens, Greece.
E. Doğan and M. P. Saka, " Particle Swarm Optimization Design of Moment Resisting steel frames
2
with Semi-rigid connections to LRFD- AISC ", Proceedings of Eighth World Congress on Structural and
Multidisciplinary Optimization, 1-5 June, 2009, Lisbon, Portugal.
E. Doğan, F. Erdal, M.P. Saka, “Optimum design of grillage systems under code provisions using
3
particle swarm optimization”, Proceedings of Genetic and Evolutionary Computation Conference, 7-
4
5
6
11 July 2010, Portland, Oregon, USA.
E. Doğan, O. Hasançebi, Investigating Economical Lengths of Single-Span Truss Bridge Topologies
under Gravity Loads”, 9th International Congress on Advances in Civil Engineering, 27-30 September
2010, Trabzon, Türkiye.
O. Hasançebi, E. Doğan, “A Comparative Study on Economical Span Lengths of Steel Truss Bridge
Topologies under Gravity Loadings”, 9th International Conference on Pacific Structural Steel
Conference, 19-22 October 2010, Beijing, China.
S. Çarbaş, E. Doğan, F. Erdal, M. P. Saka, “Comparison of Metaheuristic Techniques in Finding The
Solutions of Optimization Problems”, 2nd International Symposium on Computing in Science &
Engineering, 1-4 June 2011, Kuşadası, Aydın, Türkiye.
7
8
National Conference Proceedings
E. Doğan ve M. P. Saka, "Çelik çerçevelerin LRFD-AISC şartnamesine göre parçacık küme
1
optimizasyon yöntemi kullanılarak optimum boyutlandırılması", XVI. Ulusal Mekanik Kongresi , 22- 26
Haziran, 2009, Kayseri, Türkiye.
E. Doğan, F. Erdal, S. Çarbaş, M. P. Saka, “Izgara sistemlerin LRFD- AISC şartnamesine göre parçacık
2
küme yöntemi kullanılarak optimum boyutlandırılması”, XVII. Ulusal Mekanik Kongresi, 5-9 Eylül,
2011, Elazığ, Türkiye.
3
4
5
Books & Chapters in Books
1
2
3
Other Publications
1
2
3
4
5
6
7
8
# of Articles in SCI-Expanded
4
# of Citations in SCI-Expanded
00
PROJECTS
Date
1
2
Institution
Subject
Position
O.Hasançebi, M. P. Saka, Ö. Kurç, S. Çarbaş, E. Doğan, F. Erdal and
T. Bahçelioğlu, “Optimum Design of Three Dimensional Steel
Skeleton Structures Using Stochastic Search Techniques and its
2008-2010 TÜBİTAK
Researcher
National Structural Engineering Applications”, (TUBITAK), Ankara,
Türkiye, Proje No:108M070, (75000 US$) 01/06/2008,
01/12/2010.
Orta Doğu Teknik Üniversitesi Bilimsel Araştırma Projesi 1465
2009-2010 ODTÜ-BAP
Researcher
(BAP-2008-03-03-02)
3
4
5
PATENTS
Date
Subject
1
2
3
MENTORING ACTIVITIES
Masters Students
1
2
3
4
5
Doctoral Students
1
2
3
4
5
EDITED JOURNALS
Name of Journal
Years
1
2
3
REFEREE ACTIVITIES
Journal
International
National
0
0
Congress,
Symposium
International
National
0
0
ORGANIZING ACTIVITIES IN SYMPOSIUM & CONGRESS
Name of Activity
Year
1
2
3
MEMBERSHIPS
Association
1
2
3
Years
AWARDS AND HONORS
Institution
Years
1
2
3
COURSES GIVEN IN THE LAST TWO YEARS
Year
Semester
CV last updated
Place
0
Course Name
Level