Data Sheet (English)

Yorumlar

Transkript

Data Sheet (English)
Magnetic field sensor
magnet-inductive proximity sensor
BIM-PST-AP6X-V1131/S235
■ Rectangular, height 16 mm
■ Active face in front
■ Plastic, PA12-GF30
■ Increased sensitivity
■ DC 3-wire, 10…30 VDC
■ NO contact, PNP output
■ Male connector, M8 x 1
Wiring Diagram
BIM-PST-AP6X-V1131/S235
4625020
Pass speed
Repeatability
Temperature drift
Hysteresis
Ambient temperature
ð 10 m/s
ï ± 0.1 mm
ð 0.1 mm
ð 1 mm
-25…+70 °C
Operating voltage
Residual ripple
DC rated operational current
No-load current I0
Residual current
Rated insulation voltage
Short-circuit protection
Voltage drop at Ie
Wire breakage / Reverse polarity protection
Output function
Switching frequency
10… 30VDC
ð 10 % Uss
ð 200 mA
ð 15 mA
ð 0.1 mA
ð 0.5 kV
yes/ cyclic
ð 1.8 V
yes/ complete
3-wire, NO contact, PNP
1 kHz
Construction
Dimensions
Housing material
Active area material
Electrical connection
Vibration resistance
Shock resistance
Protection class
MTTF
Mounting on the following profiles
Cylindrical design
rectangular, PST
23 x 14 x 16 mm
Plastic, PA12-GF30
Plastic, PA12-GF30
Flange connector, M8 x 1
55 Hz (1 mm)
30 g (11 ms)
IP67
2283 years acc. to SN 29500 (Ed. 99) 40 °C
.
E
Switching state
Included in delivery
LED yellow
KLP25
Functional principle
Magnetic field sensors are activated by magnetic fields and are especially suited for piston position detection in pneumatic cylinders.
Based on the fact that magnetic fields can
permeate non-magnetizable metals, it is possible to detect a permanent magnet attached
to the piston through the aluminium wall of the
cylinder.
Edition • 2016-09-21T18:23:06+02:00
Type designation
Ident no.
1/2
Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ [email protected] ñ www.turck.com
Magnetic field sensor
magnet-inductive proximity sensor
BIM-PST-AP6X-V1131/S235
Accessories
Type code
Ident no.
Description
KLP 25 MONTAGESET
69653
Mounting on E cylinders; cylinder diameter 8…25 mm (material: Metal CuZn), 2 tie bolts (material: Metal CuZn), cylinder screw M3 x 20
KLP 80-VA
69654
Mounting on E cylinders; cylinder diameter 25…80 mm
(material: Metal A2 1.4301 (AISI 304), 2 tie bolts (material:
Metal CuZn, alternatively metal A2 1.4301 / AISI 304) cylinder screw M3 x 20; (DIN 912-A20)
KLP 200-VA
6965302
Mounting on E cylinders; cylinder diameter 80…200 mm
(material: Metal A2 1.4301 (AISI 304), 2 tie bolts (material:
Metal CuZn, alternatively metal A2 1.4301 / AISI 304) cylin-
Edition • 2016-09-21T18:23:06+02:00
der screw M3 x 20; (DIN 912-A20)
2/2
Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ [email protected] ñ www.turck.com

Benzer belgeler

Magnetic field sensor

Magnetic field sensor 55 Hz (1 mm) 30 g (11 ms) IP67 2283 years acc. to SN 29500 (Ed. 99) 40 °C

Detaylı

Inductive sensor

Inductive sensor Residual ripple DC rated operational current No-load current I0 Residual current Rated insulation voltage Short-circuit protection Voltage drop at Ie Wire breakage / Reverse polarity protection Out...

Detaylı

Bus cable for CAN (DeviceNet™, CANopen)

Bus cable for CAN (DeviceNet™, CANopen) PE (Veri), PVC (Güç) Power: RD, BK, Data: WH, BU

Detaylı

uprox®+ Inductive factor 1 sensors

uprox®+ Inductive factor 1 sensors 3-wire DC PNP 3-wire DC NPN 4-wire DC PNP 4-wire DC NPN

Detaylı

magnetic field sensor for pneumatic cylinders

magnetic field sensor for pneumatic cylinders 23 x 14 x 16 mm Plastic, PA12-GF30 Plastic, PA12-GF30 Flange connector, M8 x 1 55 Hz (1 mm) 30 g (11 ms) IP67 2283 years acc. to SN 29500 (Ed. 99) 40 °C

Detaylı

Inductive sensor

Inductive sensor ■ Male connector, M8 x 1 Wiring Diagram

Detaylı

inductive sensor

inductive sensor Mounting on E cylinders; cylinder diameter 25…80 mm (material: Metal A2 1.4301 (AISI 304), 2 tie bolts (material: Metal CuZn, alternatively metal A2 1.4301 / AISI 304) cylinder screw M3 x 20; (DIN ...

Detaylı