FDT / DTM HART programming adapter

FDT / DTM HART programming adapter
IM-PROG
■ PC adapter for programming of TURCKPACTware devices
Ausgabe • 2016-08-23T22:44:16+02:00
■ Galvanically isolated transmission of signals
1/2
Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ [email protected] ñ www.turck.com
FDT / DTM HART programming adapter
IM-PROG
Dimensions
Tip kodu
İdent no.
IM-PROG
6890422
Tekil veri sayfaları için metin modülü
The IM-PROG is intended for the parametrization of
TURCK devices with PACTware via the serial interface of a PC.
For this, the interface module to be parametrized is
connected via the IM-PROG to the serial interface of
the PC, using the included connection cable.
The interface device has to be powered for parametrization.
The IM-PROG converts the signal level and implements the galvanic isolation.
Additionally, the parameters can be stored on the
PC or printed.
TM
Tekil veri sayfaları için metin modülü
Tekil veri sayfaları için metin modülü
Tekil veri sayfaları için metin modülü
Tekil veri sayfaları için metin modülü
116 g
Ausgabe • 2016-08-23T22:44:16+02:00
Weight
2/2
Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ [email protected] ñ www.turck.com