AutroSafe Manual call-point with SelfVerify® - BF-300

AutroSafe
Manual call-point with SelfVerify® - BF-300
Features
• Addressable
• Max. 3-second response time
• The call-point comprises a built-in indicator (LED)
• Can be tested by means of a special test-key
• With the SelfVerify®-functions
• Short-circuit isolator in each call-point
• Automatic addressing
• Proven technology
• Intended for connection to Autronica’s interactive
alarm system, AutroSafe
• Designed to meet the requirement of the major
maritime classification societies
Applications
BF-300 is a manual call-point for indoor use.
The call-point is designed for use with Autronica’s
interactive fire alarm system, AutroSafe, and comprises the SelfVerify® function. This function ensures the highest grade of reliability and the lowest
degree of manual testing because all units comprising this function are automatically self-tested once
every 24 hours.
Optionally there is a BF-300M version, which is delivered with a metal box fitted with two cable glands.
This version is made for applications where a higher
degree of weather protection is required.
There are also manual call-points for use in hazardous area zone 2. The BF-300M/N has a metal
mounting box with two cable glands.
The BF-500/N has a standard plastic mounting box.
They must be connected to the BSD-310/N loop
driver, but do not require an isolator/barrier unit.
The call-point must be installed according to local
regulations, which normally means along escape
routes, landings and exits.
Principle
Break glass operation, releasing alarm switch.
Reset when a new glass is mounted.
“SelfVerify®”, the call-point’s ability to initiate
alarms is regularly checked.
116-P-BF300/CE - Rev. G, 2006-09-07
Versions
• BF-300
• BF-300M*
• BF-500/EX*
• BF-300M/N*
• BF-500/N
Manual call-point with SelfVerify®
Manual call-point with SelfVerify®,
with metal mounting box and cable
glands
Manual call-point with SelfVerify®.
EExia-version for use in all zones
Manual call-point with SelfVerify®.
Eexn-version for use in zone 2 only
Manual call-point with SelfVerify®.
Eexn-version for use in zone 2 only
* See separate data sheet
Technical Specifications
Weight
Material
Colour
Voltage
Current consumption
Stand by:
Alarm (LED):
Environm. requirement
Degree of protection
Working temperature
Storage temperature
Humidity (non-condensing)
Maintenance
Service
Approvals
Cable wire
Certificate for BF-500/N
108 g
Thermo plastic
Red
10 - 27V DC
0,3mA
6mA
EN-54
IP 24
- 30 to + 50°C
- 55 to + 70°C
Max. 95% RH
Replace broken glass
Replace if faulty
See separate documentation
2
Maximum 2,5 mm
NEMKO 03ATEX217X
Protecting life, environment and property...
Manual call-point with SelfVerify® - BF-300
Connections
Order Numbers
Order number
BF-300
BF-300/GB
Description
Call-point
BF-300 with labels
according to BS5839 part 2
Call-point certified for use in
zone 2.
BF-300/GB without
mounting box
Manual Call-point, yellow
BF-300, Swedish label
BF-500/N
BF-300/GB1
BF-300/Y1
BF-300/S
1
2
3
4
BNB-300
1. Pos (+) in
2. Pos (+) out
3. Neg (-) in
4. Neg (-) out
5. Internal connection
6. Internal connection
Dimensions
Dimensions: HxWxD = 87x87x39mm
Open mounting
20
Flush mounting
19
Fig. 1
Fig. 1
Cable knock-outs
Ø10mm
Fig. 2
60
Fig. 3
Standard mounting box BFW-1
Flush mounting box
Fig. 1: Manual call-point
Fig. 2: Standard mounting box BFW-1
Fig. 3: Box for flush mounting
Autronica Fire and Security AS
Fire and Security, Trondheim, Norway. Phone: + 47 73 58 25 00, fax: + 47 73 58 25 01.
Oil & Gas, Stavanger, Norway. Phone: + 47 51 84 09 00, fax: + 47 51 84 09 99.
Visit Autronica Fire and Security's Web site: www.autronicafire.com
5
6
Manual call point with SelfVerify, weatherproof - BF-510WP-H
Interactive fire detection systems
Product datasheet
Features








For outdoor use
Weatherproof
Degree of protection: IP52 (55)
With SelfVerify function for reduced
maintenance/testing and increased reliability
Maximum 3-second response time
Automatic addressing
Designed to meet the requirement of the major
maritime classification societies
Approved according to EN 54-11 and EN 54-17
Applications
BF-510WP-H is a manual call point for outdoor use. The
call point has been designed for use with Autronica’s
interactive fire detection systems, and comprises the
SelfVerify function. This function ensures the highest
grade of reliability and the lowest degree of manual
testing, because all units comprising this function are
automatically self-tested once every 24 hours.
The high IP degree of the enclosure makes the call point
suitable for outdoor applications.
The call point must be installed according to local
regulations, which normally means along escape routes,
landings and exits.
Technical specifications
Weight
200 g
Material
ABS
Colour
Red
Operating method
Voltage
16 – 26 VDC
 Press white plastic element. Resettable by means of
Current consumption
Stand by:
0,3mA
dedicated test key.
 Optional: Break glass element. Resettable by
mounting new glass element.
SelfVerify: the call point’s ability to initiate alarm is
regularly checked.
Installation
The backbox is provided with three knockouts for M20
cable glands, two at the top and one at the bottom.
Versions
 BF-300V2*
Manual call point with SelfVerify - standard version
 BF-510WP-H
Manual call point with SelfVerify, weatherproof – high
current version
Maximum current on
detection loop
400mA
Environm. requirement
EN 54
CPD certificate
0333-CPD-075245
Degree of protection
IP55 with cover
IP52 without cover
Working temperature
- 40 to + 70°C
Storage temperature
- 55 to + 70°C
Cable inlets
3 x M20
Service
Replace if faulty
Approvals
See website
*see separate datasheet
116-P-BF510WPH/CGB, Rev. A, 2010-06-23
Protecting life, environment and property…
Manual call point with SelfVerify, weatherproof - BF-510WP-H
Part number
116-BF-510WP-H
Description
Manual call point with SelfVerify.
High current, weatherproof
Accessories
116-4860-011.0100
Polycarbonate cover (IP55)
116-6571-011.1920
Cable gland M20x1,5
116-6531-006.1920
Gland back nut M20x1,5
116-BFG-3
Glass element
Connections
Dimensions
AUTRONICA FIRE AND SECURITY AS
Head office, NO-7483 Trondheim, Norway Tel: +47 73 58 25 00, fax: +47 73 58 25 01, e-mail: [email protected]
Oil and Gas division, Stavanger, Norway Tel: +47 51 84 09 00, fax: +47 51 84 09 99
Maritime division, Spikkestad, Norway Tel: +47 31 29 55 00, fax: +47 31 29 55 01
Visit Autronica Fire and Security AS’ website: www.autronicafire.com