PDF Olarak İncele - Eskişehir Osmangazi Üniversitesi

Adı Soyadı: Hüseyin AVCI
Tel: +90 222 239 3750 - 3688
E-Posta: [email protected]
Öğrenim Durumu
Lisans
Dokuz Eylül Üniversitesi, 2005
Yüksek Lisans
NC State University, Raleigh NC, Textile Chemistry, College of Textiles, 2010
Doktora
NC State University, Raleigh NC, Fiber and Polymer Science, College of Textiles, 2013
Araştırma İlgi Alanları
Polimerler, Polimer Nanokompozitler, Medikal Uygulamalar, Hava ve Sıvı Filtrasyonu,
Nanolifler, Teknik Tekstiller, Nanobilim
Mesleki Deneyim
Yrd. Doç. Dr., Metalurji ve Malzeme Mühendisliği, Eskisehir Osmangazi Üniversitesi,
Türkiye, 2014 - devam ediyor
Research Fellow, Istanbul Technical University&The Boeing Company, Türkiye
2013 – 2014
Post-Doc, NC State University, USA
2013 – 2014
Graduate Research Assistant, NC State University, USA
2008 – 2013
Team Leader, Product and Development Department, Calik Denim, Türkiye
2005 - 2007
Textile Engineering, Sanko Textile, Inc., Türkiye
2005
Yürütülen Projeler
1. NSF project: 0809520. US-Egypt Cooperative Research: Production of New
Biocidal Textiles Using Advanced Nano and Melt Spinning Techniques;
Research Assistant at NC State University, 2008-2010
2. Novel Melt Spun/Melt Ordered Process for Producing High Performance
Polyester Fibers; Research Assistant at NC State University, 2010-2013
3. Focus on issues relevant to the use of Fiber and Polymer Science in conducting
and developing experimental designs with writing grant proposals; Research
Fellow at NC State University, 2013-2014
4. Improving air quality in passenger aircrafts with nano-hybrid filtration;
Postdoctoral Fellow at Istanbul Technical University & The Boeing Company,
2013-2014
Yayınlar
Uluslar Arası Hakemli Dergilerde Yapılan Yayınlar
1. Gawish SM, Avci H, Ramadan AM, Mosleh S, Monticello R, Breidt F, Kotek R.
Properties of antibacterial polypropylene/nanometal composite fibers. J. Biomater. Sci.,
Polym. Ed. 2012;23:43-61.
2. Avci H, Kotek R, Yoon J. Developing an ecologically friendly isothermal bath to obtain
a new class high-tenacity and high-modulus polypropylene fibers. J. Mater. Sci.
2013;48(22):7791-7804.
3. Avci H, Monticello R, Kotek R. Preparation of antibacterial PVA and PEO nanofibers
containing Lawsonia Inermis (henna) leaf extracts. J. Biomater. Sci., Polym. Ed. 2013;
24(16):1815-1830.
4. Avci H, Monticello R, Kotek R. Characterization and development of a new method for
determination charge density of 3-(trimethoxysilyl)-propyldimethyloctadecyl ammonium
chloride coatings on polyester surfaces. AATCC Review. 2014;1(3):1-10.
5. Keene B, Bourham M, Viswanath V, Avci H, Kotek R. Characterization of degradation
of polypropylene nonwovens irradiated by γ-ray. J. Appl. Polym. Sci. 2014;131(4):1-10.
6. Avci H, Kotek R, Toliver B. Controlling of threadline dynamics via a novel method to
develop ultra-high performance polypropylene filaments. Polym. Eng. Sci.2014;1-13.
Diğer Yayınlar
1. Avci H. Development of antimicrobial materials. Germany: VDM Verlag Dr. Müller;
2011. (kitap)
2. Avci H. & Kotek R. (2014). A New Generation of High Performance Functional
Composite Fibers. 1st International Conference of Sustainable Composite
Technologies (SuCoTech 2014), Isparta, Turkey.
3. Avci H., Kucuksari A., Cebeci H., & Kilic A. (2014). Design Strategy For Novel
Nanohybrid Photocatalytic Cabin Air Filters. 14th World Textile Conference,
AUTEX, Bursa, Turkey
4. Najafi M. M., Kotek R., & Avci H. (2014). Unique Polyamide Fibers by hIB
Process. The Fiber Society Spring Conference, Liberec, Czech Republic.
5. Kucuksari A., Avci H., Cebeci H., & Kilic A. (2013). Development and Testing
of Nanofiber Filtration System for Removal of Volatile Organic Compounds
(VOC) in Aircraft Cabins. Nanotechnology Student Conference NanoTR-Student,
Istanbul Technical University, Istanbul, Turkey.
6. Najafi M. M., Avci H., Boy R., Iliya E., Makhmatkulova Z., & Kotek R. (2013).
Modifying Mechanical Properties of Nylon-6 Multifilament Yarn by Eco-friendly
Isothermal Bath. 127th NC ACS Sectional Conference, Raleigh, NC.
7. Avci H., Yoon J., & Kotek R. (2013). Investigation on the Effect of Precursors on
the Formation of Crystallization for Ultra High Performance Fibers. The Fiber
Society Fall Conference, Clemson, SC.
8. Avci H., Hudson S. M., & Kotek R. (2013). ‘Green’ Engineering for Obtaining a
New Class of High- Performance Polyolefin, Nylon & Polyester Nonwovens.
V. International R&D Brokerage Event, Bursa, Turkey.
9. Avci H., Hudson S. M., & Kotek R. (2013). ‘Green’ Engineering for Obtaining a New
Class of High-Performance Polyolefin Yarns. V. International R&D Brokerage Event,
Bursa, Turkey.
10. Avci H., Hudson S. M., & Kotek R. (2013). ‘Green’ Engineering for Obtaining a New
Class of High-Performance Nylon & Polyester Yarns. V. International R&D Brokerage
Event, Bursa, Turkey.
11. Avci H., Yoon H. J., & Kotek R. (2013). Developing an Unusual Formation of a
Precursor for Crystallization of High Performance PET Fibers Using a Low Molecular
Weight Polymer. 245th ACS National Meeting and Exposition, New Orleans, LA.
12. Avci H., & Kotek R. (2013). ‘Green’ Engineering for Obtaining a New Class of HighPerformance Fibers. The 8th Annual NC State University Graduate Student Research
Symposium (March 19th) and the Fashion Week "Design, Innovation and Technology"
Forum (April 24th), Raleigh, NC.
13. Avci H., Yoon H. J., & Kotek R. (2012). Developing an Environmentally Friendly
Isothermal Bath to Obtain a New Class of High-Performance Fibers. The Fiber Society
Fall Conference, Boston, MA.
14. Yoon J., Avci H., Kotek R., & Hudson S. (2012). Determination of Skin-Friction Drag
Force in the Modified Melt Spinning Process of Ultra-High-Tenacity PET Fibers. The
Southeastern Regional Meeting of the American Chemical Society (SERMACS), Raleigh,
NC.
15. Kotek R., & Avci H. (2010). Preparation of Antibacterial PVA and PEO Nanofibers
Containing Lawsonia Inermis (henna) Leaf Extracts. AUTEX 2010, Vilnius Lithuania.
16. Avci H. (2012). A New Approach to Produce Eco-friendly Natural Based
Antibacterial PVA and PEO Nanofibers Mats. COT, NC State University,
Raleigh, NC, USA.
17. Yoon H., Avci H., & Kotek R. (2012). Melt Spinning of High Performance Poly(ethylene
terephthalate) (PET) Yarn via Utilizing a Horizontal Isothermal Bath (HIB) in the
Threadline. 4th Triangle Soft Matter Workshop, Raleigh, NC, USA.
Dergi Hakemliği
1. Textile Research Journal
2. Polymer Engineering & Science
Ödüller
1. TUBITAK, Research Award, 2014.
2. T.C. Milli Eğitim Bakanlığı, Teşekkür Belgesi, 2009
3. T.C. Milli Eğitim Bakanlığı, Yurtdışı Doktora Eğitim Bursu, 2007
4. Dokuz Eylül Üniversitesi, Tekstil Mühendisliği Bölümü, İkincilik Ödülü, 2005
5. Dokuz Eylül Üniversitesi, Tekstil Mühendisliği Bölümü, Onur Öğrencisi, 2005
6. Dokuz Eylül Üniversitesi, Tekstil Mühendisliği Bölümü, En İyi Poster
Sunumu, Üçüncülük Ödülü, 2005
Lisans Dersleri
1. Polimer Malzemeler
2. Polimer Malzemeler Araştırmaları
3. Polimer Malzemeler ve Tasarım
Yüksek Lisans Dersleri
Metalurji ve Malzeme Mühendisliği
1. Lif ve Lifli Yapıların Özellikleri ve Kullanımı
2. İleri Biyomalzemeler ve Uygulamaları
Nanobilim ve Nanoteknoloji
1. Nano Polimerik Malzemelerin Yapısı ve Özellikleri
Bilimsel ve Mesleki Kuruluşlara Üyelikler
1. American Chemical Society (ACS)
2. The Fiber Society