Copenhagen - Eclipse Lighting Inc.

Copenhagen
We reserve the right to revise the design or components of any product without notice.
EURO WALL PACK FAMILY;
Surface Mount;
Vandal Resistant HID, CFL, LED
CATALOG #
TYPE
PROJECT/LOCATION
APPROVED BY
STYLE A
SPECIFICATIONS
STYLE B
• REFLECTOR — .032 aluminum For High Efficiency
• BALLAST — For Compact Fluorescent Electronic Cold Weather HPF is Standard.
For HID Pulse Start is Standard.
• DIFFUSER — Opal White Injection Molded Polycarbonate Standard. Optional Ribbed Clear (RC) or Frosted (RF) Prismatic Polycarbonate.
• EMERGENCY — CFL, LED — Remote Only.
• FASTENERS — (4) Stainless steel tamperproof Torx screws to secure lens to backplate
• FINISH — Extremely durable oven baked Polyester Powder coat – Finishes include Black, Bronze or White.
• GASKETING — One Piece Die Cut 3/16” Thick Black EPDM and/or neoprene rubber.
STYLE D
• HOUSING — Cast aluminum with injection-molded polycarbonate trim and diffuser.
• LAMP — LED, Double Twin Tube or Triple Twin Tube mini-fluorescent; Medium Base Metal Halide STYLE C
(Deep Cast only) as required — by others.
• MOUNTING HOLES — (4) 5/16” Diameter Holes for 1/4” Diameter Bolts.
• COMPLIANCE — Built to comply with U.S. and Canadian safety standards.
Suitable for wet locations (requires 4-point mounting).
STYLE E
STYLE F
DIMENSIONS
12"
1/2"
3-1/2"
12"
2-7/8"
5-7/8"
13-7/8"
4-1/3"
7-1/3"
9245 W. Ivanhoe St. I Schiller Park, IL 60176
P: 847-260-0333 I F:847-260-0344 I E: [email protected] I W: eclipselightinginc.com
8-7/8"
© 2016 Eclipse Lighting Inc.
Eclipse Lighting pg.55 Rev. Jun 1, 2016
Copenhagen
LAMP TYPE/QTY/WATTAGE ❶
Visit www.eclipselightinginc.com for available IES files
Fixture
EURO WALL PACK FAMILY;
Surface Mount;
Vandal Resistant HID, CFL, LED
Series
Style
COPENHAGEN Shallow
COPENHAGEN Mid-Depth
COPENHAGEN Deep
14” x 9” x 3½” (ADA)
14” x 9” x 6”
14” x 9” x 7½”
(1 or 2)13w; (1)26w
(1 or 2)13/26w
(1 or 2)26w
(1)26/32w
(1 or 2)26/32; (1)42w
(1 or 2)26/32w; (1)42w
Dimensions - W x H x D (nominal)
Compact Fluorescent
DTT
Double Twin Tube
Compact Fluorescent
TTT
Triple Twin Tube
Pulse Start Metal Halide
MH
N/A
N/A
50/70w
Light Emitting Diode
LED
15w
20/35w
20/30/35w
Lamp Type/Qty/Watt
Color Temp
Voltage: Primary/Emergency
Finish
Options
ORDERING GUIDE:
SERIES
FINISH
CP-S=Copenhagen Shallow Casting Series
(4” deep, ADA)—Not for Use with
Surface Conduit Entry
CP-M = Copenhagen Mid-Depth Casting Series
(6-1/2” deep)
CP-D = Copenhagen Deep Casting Series
(8” deep)
STYLE
A
B
C
D
E
F
= Style A: with Cage
= Style B: no Cage
= Style C: Horizontal Eyelid with Vertical Bar
= Style D: Vertical Eyelid with Vertical Bar
= Style E: Horizontal Eyelid 2 - no Bar
= Style F: Vertical Eyelid 2 - no Bar
No onsite Emergency Power (AC or DC) is provided
Specify Fixture Voltage: 120V or 277V Power Feed
A=120V or B=277V
COLOR WINDOW
EL2 = Integral (CP-M, CP-D); (1)TTT; 650 Lms
REL2 = Remote: TTT; 1-2 Lamp; 650 Lms
REL35 = Remote, Cold Weather
TTT; 1-2 Lamp; 1250 Lms
*SPECIFY FRONT/SIDES/BOTH
AM
=Amber
BLU
=Blue
CC
=Custom Color (Consult Factory)
GN
=Green
OPL
=Translucent Opal White
RD
=Red
VOLTAGE
LED COLOR TEMPERATURE
LED OPTIONS
Refer to Chart Above
120
=120 Volts
277
=277 Volts
347
=347 Volts (Consult Factory for “S” size)
EBMH=Electronic Ballast for Metal Halide
EBU=Universal Volt (120-277v)
3K
=±3000K range LED (120 Initial LPW)
4K
=±4000K range LED (132 Initial LPW)
5K
=±5000K range LED (140 Initial LPW)
6K
=±6000K range LED (145 Initial LPW)
Fluorescent Emergency Battery
OPTIONS
9002
9206
9221
9328
FUS
DFUS
GTD
RC
RF
LAMP TYPE/QUANTITY/WATTAGE
EMERGENCY BATTERY OPTIONS❸
BK
=Black—Standard
BZ
=Bronze
WH
=White
SGR
=Titanium Silver Gray
= Torx Tamperproof Screwdriver
= Photocell – 120V
= Photocell – 277V
= Universal Photocell – 120/277V
= Single Fusing
= Double Fusing
= Generator Transfer Device (Bodine)
= Ribbed Clear Prism. Polycarbonate Diffuser
= Ribbed Frosted Opal Diffuser
BL = Dual Circuit for Bi-Level light (High/Low), includes 2EBU
D7 = 0-10V low-voltage dimming (100-30%
Standard, Consult Factory for Other)
MSE = Motion Sensor External
—Single circuit-all on, all off
Specify Finish: White (WH)/Bronze (BZ)
MSE2 = Motion Sensor External
— Dual circuit, half on half off
Specify Finish: White (WH)/Bronze (BZ)
SG = 10KA Surge Protection for LED fixtures
Available CP-M and CP-D Only
(meets ANSI spec C62.41.2)
LED Emergency Battery REL61
=Remote: LED 12W, ± 720 Lms
(by Iota)
REL63
=Remote: LED 23W, ± 1290 Lms
(Bodine)
REL67
=Remote, Cold Weather LED 23W,
± 1290 Lms (Iota)
REL82=Remote: LED 4W (Fulham)
—Factory Recom'd
REL85
=Remote: LED 20W (Fulham)
—Factory Recom'd
REL88=Remote: LED 16W (Fulham)
—Factory Recom'd
LED EMERGENCY CIRCUIT
Onsite Generator Power (AC) or Battery Power (DC)
is provided via separate circuit to the fixture
NOTES:
❶ Consult Factory with requests regarding lamp sources, including LED, color temp., wattages or voltages not shown.
❷ Emergency Battery (EL) includes Backbox
❸ Consult Factory for additional Emergency Battery options.
Max WHIP length with the REL provided by the factory is 8 feet.
EC1A = (1) 5W LED for Line Voltage (120VAC)
EC2A = (1) 5W LED for Line Voltage (277VAC)
EC3A = (2) 5W LED for Line Voltage (120VAC)
EC4A = (2) 5W LED for Line Voltage (277VAC)
EC1D = (1) 5W LED for Low Voltage (12VDC)
EC2D = (1) 5W LED for Low Voltage (24VDC)
EC3D = (2) 5W LED for Low Voltage (12VDC)
EC4D = (2) 5W LED for Low Voltage (24VDC)
Consult Factory for other Voltage.
Due to form and fit, final selection of the Battery Pack under discretion of Factory
© 2016 Eclipse Lighting Inc.
pg.56 Eclipse Lighting
Rev. Jun 1, 2016 9245 W. Ivanhoe St. I Schiller Park, IL 60176
P: 847-260-0333 I F:847-260-0344 I E: [email protected] I W: eclipselightinginc.com