M20000 Apollo Alutherm

Product line for thermal-breaking frames
with PVC-groove “tilt-and-turn” mechanism (16mm)
Basic Characteristics:
9 “Tilt-and-turn” hinged system, with fiberglass-polymerized
PA 6.6 polyamide disrupting thermal transmission to the
frame’s exterior
9 Steel 16mm mechanism, with up to 17 mushroom-shaped
locking points securing into chambered backsets
9 Three-level sealing, with EPDM gaskets and “ALUSEAL”
central sealant
9 Frame profiles specially designed to secure the application
of hinges
9 Variety of flat, curved, and pvc-look design in frames and
sashes
9 Increased frame-to-sash distance, for enhanced sealing with
continuous gaskets’ application, even under the hinges
9 Longer sash wings, fully supporting the mechanism’s
adjustments without sealing losses
9 Supports glazing up to 32mm or 130 Kg per sash
TECHNICAL SPECIFICATIONS OF PROFILES
Aluminum alloy
AlMgSi (EN AW 6060)
Hardness
12 Webster or 70 HB minimum
Minimum Powder Coating Thickness
75µm minimum
Profile thickness (min-max)
1,4 – 2,0 mm
Profile Geometry Control
EN DIN 12020-2 Compliant
Thermal-break
Mechanical, with PA 6.6 fiber enforced polyamide at
20mm in sashes and 24mm in frames
TECHNICAL SPECIFICATIONS OF SYSTEM TYPOLOGIES
62,5 / 70 mm
Single, double or triple, up to 32 mm
130 Kg per sash
“ALUSEAL” system, with EPDM gaskets applied in
3 levels
Width for basic frame / sash
Glazing supported
Maximum glazing weight
Sealing
Construction options:
9 One or two-sash doors and windows, with or without shutters.
9 Main entrances (not available yet)
9 For corners and other supplementary constructions, the product line can utilize the profiles of M11000
Alutherm Plus
Certifications:
9 The design, the production process, and the quality control of all profiles produced by Alumil are
certified with ISO 9001.
9 The process of electrostatic powder coating is certified by QUALICOAT and RAL (GSB) in all plants
operated by Alumil.