IP Adresi Çakışmalarının Linux ile belirlenmesi ve

IP Adresi Çakışmalarının Linux ile belirlenmesi ve çözümlenmesi
IP Adresi Çakışmalarının Linux ile belirlenmesi ve
çözümlenmesi
Bir ağ yöneticisi için en sinir bozucu sorunlardan biri bir ağ üzerinde iki veya
daha fazla makinenin aynı IP kullanmaya çalışmasına rastlamak olabilir.
The result is typically that some packets on the network go to one machine, and some packets go to the other – leading to
intermittent packet loss and dropped connections.
Luckily, however, resolving IP address conflicts is easy if you know the right tools. This how to will teach you to find and resolve IP
address conflicts on your network.
Araç
In order to identify the IP address conflict, you are going to need a Linux machine on the subnet that has the conflict, and a copy of
arp-scan. You can install arp-scan on Fedora/RedHat or Ubuntu by using the following commands:
Fedora/RedHat
Ubuntu
sudo yum install arp-scan sudo apt-get install arp-scan
Once arp-scan is installed, you’re just one step away from identifying (and punishing) the perpetrators!
Tüm localhost ip Listesini Çekmek İçin:
arp-scan --interface=eth0 --localnet
Örnek arp-scan Bağlantıları
Specify a list of IP addresses as arguments, e.g. arp-scan --interface=eth0 192.168.1.1 192.168.1.2 192.168.1.3
Specify the network in <network>/<bits> format, e.g. arp-scan --interface=eth0 192.168.1.0/24
Specify the network in <network>:<netmask> format, e.g. arp-scan --interface=eth0 192.168.1.0:255.255.255.0
Specify the inclusive address range in <start>-<end> format, e.g. arp-scan --interface=eth0 192.168.1.3-192.168.1.27
Read the list of IP addresses from a file, e.g. arp-scan --interface=eth0 --file=ip-address-list.txt
IP Çakışmasını Bulmak
Finding an IP conflict is as simple as a single command, “arp-scan -l”. You may also wish to specify the -I option, which will allow
you to pick an interface. Below, I have identified an IP address that is being claimed by two machines:
www.dijitalders.com
IP Adresi Çakışmalarının Linux ile
belirlenmesi ve çözümlenmesi
1
IP Adresi Çakışmalarının Linux ile belirlenmesi ve çözümlenmesi
[root@pioneer jdeprizi]# arp-scan -I eth0 -l
Interface: eth0, datalink type: EN10MB (Ethernet)
Starting arp-scan 1.7 with 256 hosts (http://www.nta-monitor.com/tools/arp-scan/)
192.168.0.1 00:0f:b5:0f:f5:7e NETGEAR Inc
192.168.0.4 00:1d:09:29:77:7f Dell Inc
192.168.0.5 c4:17:fe:8c:5f:de (Unknown)
192.168.0.9 00:21:85:c2:30:6b MICRO-STAR INT’L CO.,LTD.
192.168.0.9 00:20:6b:c6:12:04 Intel Corporate (DUP: 2)
192.168.0.11 00:0d:4b:45:db:b7 Roku, LLC
192.168.0.100 00:14:d1:c5:91:00 TRENDware International, Inc.
7 packets received by filter, 0 packets dropped by kernel
Ending arp-scan 1.7: 256 hosts scanned in 1.737 seconds (147.38 hosts/sec). 7 responded
Notice that 192.168.0.9 is being claimed by two machines, and that the second machine is marked as a duplicate. I can tell that
one of the machines has a Network Interface Card manufactured by MICRO-STAR and one of the machines has a NIC made by Intel.
Using this information, it becomes much easier to track down and fix the IP conflict on my network.
Sonuç
Arp-scan is a very powerful tool, and I would definitely encourage network administrators to learn about its many options.
Identifying machines that have an IP address conflict is just one use of the arp-scan tool, but it makes it one of my favorite
programs in my toolbox.
What about you? What are the networking tools that you couldn’t live without?
Kaynak
http://techthrob.com/2010/06/identifying-and-resolving-ip-address-conflicts-with-linux/
http://www.nta-monitor.com/wiki/index.php/Arp-scan_User_Guide
www.dijitalders.com
IP Adresi Çakışmalarının Linux ile
belirlenmesi ve çözümlenmesi
2